Generated by kicad-footprint-generator · KiCad file format 20260206
LM4120IM5-2.5
Texas Instruments · Voltage References · SOT-23-5
LM4120IM5-2.5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | unconnected | The REF pin must be left unconnected in all cases, and it is sensitive to noise and capacitive loading, so it should be kept isolated on the PCB. |
| 2 | GND | power_in | Negative supply or ground connection. |
| 3 | Enable | input | Pulled to input for normal operation, and forcing this pin to ground turns off the output; floating this pin is not recommended. |
| 4 | VIN | power_in | Positive supply; the device operates with input voltages from 2 V to 12 V. |
| 5 | VOUT | output | Reference output, which can source and sink up to ±5 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage initial accuracy | VOUT | -0.5 | 0.5 | % | LM4120-2.500 | 4 | |
| Temperature coefficient | TCVOUT/°C | 14 | 50 | ppm/°C | -40°C ≤ TA ≤ +125°C | 4 | |
| Line regulation | ΔVOUT/ΔVIN | 0.0007 | 0.008 | %/V | 3.3 V ≤ VIN ≤ 12 V | 4 | |
| Line regulation | ΔVOUT/ΔVIN | 0.01 | %/V | -40°C ≤ TA ≤ 85°C | 4 | ||
| Load regulation | ΔVOUT/ΔILOAD | 0.03 | 0.08 | %/mA | 0 mA ≤ ILOAD ≤ 1 mA | 4 | |
| Load regulation | ΔVOUT/ΔILOAD | 0.17 | %/mA | -40°C ≤ TA ≤ 85°C | 4 | ||
| Load regulation | ΔVOUT/ΔILOAD | 0.01 | 0.04 | %/mA | 1 mA ≤ ILOAD ≤ 5 mA | 4 | |
| Load regulation | ΔVOUT/ΔILOAD | 0.1 | %/mA | -40°C ≤ TA ≤ 85°C | 4 | ||
| Load regulation | ΔVOUT/ΔILOAD | 0.04 | 0.12 | %/mA | -1 mA ≤ ILOAD ≤ 0 mA | 4 | |
| Dropout voltage | VIN−VOUT | 45 | 65 | mV | ILOAD = 0 mA | 4 | |
| Dropout voltage | VIN−VOUT | 80 | mV | -40°C ≤ TA ≤ 85°C | 4 | ||
| Dropout voltage | VIN−VOUT | 120 | 150 | mV | ILOAD = 1 mA | 4 | |
| Dropout voltage | VIN−VOUT | 180 | mV | -40°C ≤ TA ≤ 85°C | 4 | ||
| Dropout voltage | VIN−VOUT | 180 | 210 | mV | ILOAD = 5 mA | 4 | |
| Dropout voltage | VIN−VOUT | 250 | mV | -40°C ≤ TA ≤ 85°C | 4 | ||
| Supply current | IS | 160 | 250 | µA | 5 | ||
| Supply current | IS | 275 | µA | -40°C ≤ TA ≤ 85°C | 5 | ||
| Power-down supply current | ISS | 2 | µA | -40°C ≤ TA ≤ 85°C | 5 | ||
| Logic high input voltage | VH | 2.4 | V | -40°C ≤ TA ≤ 85°C | 5 | ||
| Logic low input voltage | VL | 0.2 | V | -40°C ≤ TA ≤ 85°C | 5 | ||
| Logic high input current | IH | 15 | µA | -40°C ≤ TA ≤ 85°C | 5 | ||
| Short circuit current | ISC | 6 | 30 | mA | VIN = 3.3 V, VOUT = 0; -40°C ≤ TA ≤ 85°C | 5 | |
| Maximum voltage on input or enable pins | -0.3 | 14 | V | 3 | |||
| Power dissipation | 350 | mW | TA = 25°C | 3 | |||
| Lead temperature, soldering (10 sec.) | 260 | °C | Soldering, 10 sec. | 3 | |||
| Lead temperature, vapor phase (60 sec.) | 215 | °C | Vapor phase, 60 sec. | 3 | |||
| Lead temperature, infrared (15 sec.) | 220 | °C | Infrared, 15 sec. | 3 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Ambient temperature | -40 | 85 | °C | 4 | |||
| Junction temperature | -40 | 125 | °C | 4 | |||
| Junction-to-ambient thermal resistance | RθJA | 170.4 | °C/W | DBV [SOT-23] 5-pin package | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM4120IM5-2.5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm4120im5-2-5-etched.step/lm4120im5-2-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm4120im5-2-5.step/lm4120im5-2-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
0dff4ab1d99466fd, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).