Generated by kicad-footprint-generator · KiCad file format 20260206
LM4041QCEM3-1.2NO
Texas Instruments · Voltage Reference · SOT-23-3
LM4041QCEM3-1.2NO from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CATHODE | passive | Cathode / negative terminal (-). Shunt current flows in here and the 1.225 V reference voltage is developed between this pin and the anode. Bias through a series resistor from the supply so the shunt current stays within 60 µA to 12 mA. |
| 2 | ANODE | passive | Anode / positive terminal (+). Normally tied to ground in a shunt-reference topology; forms the return for the 1.225 V reference developed across cathode-to-anode. |
| 3 | NC | unconnected | No internal connection. Must be left floating, or connected to the anode (+) pin. TI recommends tying to anode in high-EMI environments (e.g. near transformers) or where significant high-frequency switching noise is present. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
LM4041QCEM3-1.2NOLM4041QCEM3-1.2NOIDBZLM4041QCEM3-1.2NOQDBZLM4041QCEM3-1.2NOIDCKLM4041QCEM3-1.2NOILPLM4041QCEM3-1.2NOILPRLM4041QCEM3-1.2NOILPE3
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reverse breakdown voltage tolerance | -6 | 6 | mV | IR = 100µA, TA = TJ = 25°C | 10 | ||
| Reverse breakdown voltage tolerance | -18.4 | 18.4 | mV | IR = 100µA, TA = TJ = TMIN to TMAX | 10 | ||
| Minimum operating current | IRMIN | 45 | 60 | µA | TA = TJ = 25°C | 10 | |
| Minimum operating current | IRMIN | 68 | µA | TA = TJ = TMIN to TMAX | 10 | ||
| Average reverse breakdown voltage temperature coefficient | ΔVR/ΔT | -20 | 20 | ppm/°C | IR = 10mA | 10 | |
| Average reverse breakdown voltage temperature coefficient | ΔVR/ΔT | -15 | 15 | ppm/°C | IR = 1mA, TA = TJ = 25°C | 10 | |
| Average reverse breakdown voltage temperature coefficient | ΔVR/ΔT | -100 | 100 | ppm/°C | TA = TJ = TMIN to TMAX | 10 | |
| Change in reverse breakdown voltage with operating current, over temperature | ΔVR/ΔIR | 2 | mV | IRMIN ≤ IR ≤ 1mA, TA = TJ = TMIN to TMAX | 10 | ||
| Change in reverse breakdown voltage with operating current | ΔVR/ΔIR | 2.5 | 6 | mV | 1mA ≤ IR ≤ 12mA, TA = TJ = 25°C | 11 | |
| Change in reverse breakdown voltage with operating current, over temperature | ΔVR/ΔIR | 8 | mV | 1mA ≤ IR ≤ 12mA, TA = TJ = TMIN to TMAX | 11 | ||
| Reverse dynamic impedance | ZR | 0.5 | Ω | IR = 1mA, f = 120Hz, IAC = 0.1 IR, TA = TJ = 25°C | 11 | ||
| Reverse dynamic impedance | ZR | 1.5 | Ω | IR = 1mA, f = 120Hz, IAC = 0.1 IR, TA = TJ = TMIN to TMAX | 11 | ||
| Reverse breakdown voltage | VR | 1.225 | V | IR = 100µA | 10 | ||
| Wideband noise | eN | 20 | µVRMS | IR = 100µA, 10Hz ≤ f ≤ 10kHz | 11 | ||
| Long-term stability of reverse breakdown voltage (non-cumulative) | ΔVR | 120 | ppm | T = 1000 hours, T = 25°C ±0.1°C, IR = 100µA | 11 | ||
| Thermal hysteresis | VHYST | 0.08 | % | ΔT = -40°C to +125°C | 11 | ||
| Operating temperature (extended grade) | TA | -40 | 125 | °C | Extended temperature range device grade | 5 | |
| Reverse current (1.2 V version) | IR | 60 | 12000 | µA | 5 | ||
| Reverse current | IR | 20 | mA | 5 | |||
| Forward current | IF | 10 | mA | 5 | |||
| Power dissipation (DBZ package) | PD | 306 | mW | TA = 25°C, DBZ (SOT-23) package | 5 | ||
| Lead temperature, vapor phase (60 s), DBZ package | 215 | °C | DBZ package, vapor phase 60 s | 5 | |||
| Lead temperature, infrared (15 s), DBZ package | 220 | °C | DBZ package, infrared 15 s | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Junction-to-ambient thermal resistance (SOT-23, 3-pin) | RθJA | 291.9 | °C/W | SOT-23 3-pin | 6 | ||
| Junction-to-case (top) thermal resistance (SOT-23, 3-pin) | RθJC(top) | 114.3 | °C/W | SOT-23 3-pin | 6 | ||
| Junction-to-board thermal resistance (SOT-23, 3-pin) | RθJB | 62.3 | °C/W | SOT-23 3-pin | 6 | ||
| Junction-to-top characterization parameter (SOT-23, 3-pin) | ψJT | 7.4 | °C/W | SOT-23 3-pin | 6 | ||
| Junction-to-board characterization parameter (SOT-23, 3-pin) | ψJB | 61 | °C/W | SOT-23 3-pin | 6 | ||
| Typical thermal resistance, board-mounted (SOT-23) per footnote (3) | RθJA | 326 | °C/W | SOT-23 package, board-mounted, footnote (3) | 5 |
CAD (KiCad official)
- Symbol:
LM4041QCEM3-1.2NO - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
lm4041qcem3-1-2no-etched.step/lm4041qcem3-1-2no-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm4041qcem3-1-2no.step/lm4041qcem3-1-2no.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (None pp, sha256
cd8ea9cf52a32021, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).