Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM4041QCEM3-1.2NO

Texas Instruments · Voltage Reference · SOT-23-3

LM4041QCEM3-1.2NO from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CATHODE passive Cathode / negative terminal (-). Shunt current flows in here and the 1.225 V reference voltage is developed between this pin and the anode. Bias through a series resistor from the supply so the shunt current stays within 60 µA to 12 mA.
2 ANODE passive Anode / positive terminal (+). Normally tied to ground in a shunt-reference topology; forms the return for the 1.225 V reference developed across cathode-to-anode.
3 NC unconnected No internal connection. Must be left floating, or connected to the anode (+) pin. TI recommends tying to anode in high-EMI environments (e.g. near transformers) or where significant high-frequency switching noise is present.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-3
Category Power Management (PMIC)
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • LM4041QCEM3-1.2NO
  • LM4041QCEM3-1.2NOIDBZ
  • LM4041QCEM3-1.2NOQDBZ
  • LM4041QCEM3-1.2NOIDCK
  • LM4041QCEM3-1.2NOILP
  • LM4041QCEM3-1.2NOILPR
  • LM4041QCEM3-1.2NOILPE3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reverse breakdown voltage tolerance -6 6 mV IR = 100µA, TA = TJ = 25°C 10
Reverse breakdown voltage tolerance -18.4 18.4 mV IR = 100µA, TA = TJ = TMIN to TMAX 10
Minimum operating current IRMIN 45 60 µA TA = TJ = 25°C 10
Minimum operating current IRMIN 68 µA TA = TJ = TMIN to TMAX 10
Average reverse breakdown voltage temperature coefficient ΔVR/ΔT -20 20 ppm/°C IR = 10mA 10
Average reverse breakdown voltage temperature coefficient ΔVR/ΔT -15 15 ppm/°C IR = 1mA, TA = TJ = 25°C 10
Average reverse breakdown voltage temperature coefficient ΔVR/ΔT -100 100 ppm/°C TA = TJ = TMIN to TMAX 10
Change in reverse breakdown voltage with operating current, over temperature ΔVR/ΔIR 2 mV IRMIN ≤ IR ≤ 1mA, TA = TJ = TMIN to TMAX 10
Change in reverse breakdown voltage with operating current ΔVR/ΔIR 2.5 6 mV 1mA ≤ IR ≤ 12mA, TA = TJ = 25°C 11
Change in reverse breakdown voltage with operating current, over temperature ΔVR/ΔIR 8 mV 1mA ≤ IR ≤ 12mA, TA = TJ = TMIN to TMAX 11
Reverse dynamic impedance ZR 0.5 Ω IR = 1mA, f = 120Hz, IAC = 0.1 IR, TA = TJ = 25°C 11
Reverse dynamic impedance ZR 1.5 Ω IR = 1mA, f = 120Hz, IAC = 0.1 IR, TA = TJ = TMIN to TMAX 11
Reverse breakdown voltage VR 1.225 V IR = 100µA 10
Wideband noise eN 20 µVRMS IR = 100µA, 10Hz ≤ f ≤ 10kHz 11
Long-term stability of reverse breakdown voltage (non-cumulative) ΔVR 120 ppm T = 1000 hours, T = 25°C ±0.1°C, IR = 100µA 11
Thermal hysteresis VHYST 0.08 % ΔT = -40°C to +125°C 11
Operating temperature (extended grade) TA -40 125 °C Extended temperature range device grade 5
Reverse current (1.2 V version) IR 60 12000 µA 5
Reverse current IR 20 mA 5
Forward current IF 10 mA 5
Power dissipation (DBZ package) PD 306 mW TA = 25°C, DBZ (SOT-23) package 5
Lead temperature, vapor phase (60 s), DBZ package 215 °C DBZ package, vapor phase 60 s 5
Lead temperature, infrared (15 s), DBZ package 220 °C DBZ package, infrared 15 s 5
Storage temperature Tstg -65 150 °C 5
Junction-to-ambient thermal resistance (SOT-23, 3-pin) RθJA 291.9 °C/W SOT-23 3-pin 6
Junction-to-case (top) thermal resistance (SOT-23, 3-pin) RθJC(top) 114.3 °C/W SOT-23 3-pin 6
Junction-to-board thermal resistance (SOT-23, 3-pin) RθJB 62.3 °C/W SOT-23 3-pin 6
Junction-to-top characterization parameter (SOT-23, 3-pin) ψJT 7.4 °C/W SOT-23 3-pin 6
Junction-to-board characterization parameter (SOT-23, 3-pin) ψJB 61 °C/W SOT-23 3-pin 6
Typical thermal resistance, board-mounted (SOT-23) per footnote (3) RθJA 326 °C/W SOT-23 package, board-mounted, footnote (3) 5

CAD (KiCad official)

  • Symbol: LM4041QCEM3-1.2NO
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3 (KiCad packages3D, STEP)
  • 3D model files: lm4041qcem3-1-2no-etched.step / lm4041qcem3-1-2no-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4041qcem3-1-2no.step / lm4041qcem3-1-2no.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 cd8ea9cf52a32021, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF