LM4040C25FTA-TP

{
 "schema": "adom.pads/1",
 "slug": "lm4040c25fta-tp",
 "footprint": "SOT-23",
 "generated_from": {
  "footprint": "SOT-23@sha256:0d88c86c1b6d8c1a",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -0.9375,
   -0.95
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-23@sha256:0d88c86c1b6d8c1a"
 },
 "pad_count": 3,
 "symbol_pins": [
  "1",
  "2",
  "3"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.9375,
    -0.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "CATHODE",
   "type": "passive",
   "description": "Cathode (+) of the shunt voltage reference. Connect through a series resistor RS to the supply so that reverse current stays between IRMIN (45 µA typ, 65 µA max) and 15 mA. Regulates to VR = 2.5 V (±0.5%) with respect to ANODE.",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-23.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.9375,
    0.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "ANODE",
   "type": "passive",
   "description": "Anode (−) of the shunt voltage reference. Normally tied to circuit ground; the 2.5 V reference voltage appears between CATHODE and this pin.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    0.9375,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "NC",
   "type": "passive",
   "description": "No internal connection to the reference circuit; pin is attached to the die substrate. Must be either left open or connected to ANODE - do not tie to CATHODE or to any other node.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}