main
History Download
Ray lm393pt: specified limits as data (metadata.characteristics, 28 rows from the datasheet) 19d2a89

LM393PT

STMicroelectronics · Comparators · TSSOP-8

LM393PT from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out1 output Open-collector output of comparator 1, with output sink current of 6 mA min and 18 mA typ at Vid = 1 V, Vo = 1.5 V and VOL of 80 mV typ at 4 mA.
2 In1- input Inverting input of comparator 1, with common-mode range 0 to (VCC+) - 1.5 V and not to go below -0.3 V.
3 In1+ input Non-inverting input of comparator 1, with common-mode range 0 to (VCC+) - 1.5 V and not to go below -0.3 V.
4 Vcc- power_in Negative supply, ground in single-supply operation; supply span (VCC+) - (VCC-) is 2 V to 36 V.
5 In2+ input Non-inverting input of comparator 2, with common-mode range 0 to (VCC+) - 1.5 V and not to go below -0.3 V.
6 In2- input Inverting input of comparator 2, with common-mode range 0 to (VCC+) - 1.5 V and not to go below -0.3 V.
7 Out2 output Open-collector output of comparator 2, with output sink current of 6 mA min and 18 mA typ at Vid = 1 V, Vo = 1.5 V and VOL of 80 mV typ at 4 mA.
8 Vcc+ power_in Positive supply, with supply span 2 V to 36 V (±1 V to ±18 V) and absolute maximum of 36 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage Vio 1 5 mV VCC+ = 5 V, VCC- = 0 V, Tamb = 25 °C 7
Input offset voltage over temperature Vio 9 mV Tmin ≤ Tamb ≤ Tmax 7
Input offset current Iio 3 50 nA VCC+ = 5 V, VCC- = 0 V, Tamb = 25 °C 7
Input offset current over temperature Iio 150 nA Tmin ≤ Tamb ≤ Tmax 7
Input bias current (I+ or I-) Iib 20 250 nA VCC+ = 5 V, VCC- = 0 V, Tamb = 25 °C 7
Input bias current over temperature Iib 400 nA Tmin ≤ Tamb ≤ Tmax 7
Large signal voltage gain Avd 50 200 V/mV VCC = 15 V, RL = 15 kΩ, Vo = 1 V to 11 V 7
Supply current (all comparators) ICC 0.45 1 mA VCC = 5 V, no load 7
Supply current (all comparators) ICC 0.6 2.5 mA VCC = 30 V, no load 7
Low-level output voltage VOL 80 400 mV Vid = -1 V, Isink = 4 mA 7
Low-level output voltage over temperature VOL 700 mV Tmin ≤ Tamb ≤ Tmax 7
High-level output current over temperature IOH 1 μA VCC = Vo = 30 V, Vid = 1 V, Tmin ≤ Tamb ≤ Tmax 7
Output sink current Isink 6 18 mA Vid = 1 V, Vo = 1.5 V 7
Supply voltage VCC 2 36 V (VCC+) - (VCC-) 6
Common mode input voltage range Vicm 0 V VCC+ = 30 V, Tamb = 25 °C; high end (VCC+) - 1.5 V 6
Common mode input voltage range over temperature Vicm 0 V VCC+ = 30 V, Tmin ≤ Tamb ≤ Tmax; high end (VCC+) - 2 V 6
Operating free-air temperature range (LM393, LM393A) Toper 0 70 °C LM393, LM393A 6
Supply voltage VCC 36 V Printed as ±18 or 36 V 5
Differential input voltage Vid -36 36 V 5
Input voltage Vin -0.3 36 V 5
Maximum junction temperature Tj 150 °C 5
Storage temperature range Tstg -65 150 °C 5
Thermal resistance junction to ambient (TSSOP8) Rthja 120 °C/W Values are typical 5
Thermal resistance junction to case (TSSOP8) Rthjc 37 °C/W Values are typical 5
Input offset voltage Vio 1 mV VCC+ = 5 V, VCC- = 0 V, Tamb = 25 °C 7
High-level output current IOH 0.1 nA VCC = Vo = 30 V, Vid = 1 V, Tamb = 25 °C 7
Response time tre 1.3 μs RL = 5.1 kΩ connected to VCC+ 7
Large signal response time trel 300 ns RL = 5.1 kΩ connected to VCC+, VEL = TTL, V(ref) = 1.4 V 7

CAD (KiCad official)

  • Symbol: LM393PT
  • Footprint: Package_SO:TSSOP-8_3x3mm_P0.65mm
  • 3D model: TSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm393pt-etched.step / lm393pt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm393pt.step / lm393pt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (21 pp, sha256 dc3b85d8e0cb60ca, retrieved 2026-10-03, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF