Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
LM393PT
STMicroelectronics · Comparators · TSSOP-8
LM393PT from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Open-collector output of comparator 1, with output sink current of 6 mA min and 18 mA typ at Vid = 1 V, Vo = 1.5 V and VOL of 80 mV typ at 4 mA. |
| 2 | In1- | input | Inverting input of comparator 1, with common-mode range 0 to (VCC+) - 1.5 V and not to go below -0.3 V. |
| 3 | In1+ | input | Non-inverting input of comparator 1, with common-mode range 0 to (VCC+) - 1.5 V and not to go below -0.3 V. |
| 4 | Vcc- | power_in | Negative supply, ground in single-supply operation; supply span (VCC+) - (VCC-) is 2 V to 36 V. |
| 5 | In2+ | input | Non-inverting input of comparator 2, with common-mode range 0 to (VCC+) - 1.5 V and not to go below -0.3 V. |
| 6 | In2- | input | Inverting input of comparator 2, with common-mode range 0 to (VCC+) - 1.5 V and not to go below -0.3 V. |
| 7 | Out2 | output | Open-collector output of comparator 2, with output sink current of 6 mA min and 18 mA typ at Vid = 1 V, Vo = 1.5 V and VOL of 80 mV typ at 4 mA. |
| 8 | Vcc+ | power_in | Positive supply, with supply span 2 V to 36 V (±1 V to ±18 V) and absolute maximum of 36 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | Vio | 1 | 5 | mV | VCC+ = 5 V, VCC- = 0 V, Tamb = 25 °C | 7 | |
| Input offset voltage over temperature | Vio | 9 | mV | Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Input offset current | Iio | 3 | 50 | nA | VCC+ = 5 V, VCC- = 0 V, Tamb = 25 °C | 7 | |
| Input offset current over temperature | Iio | 150 | nA | Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Input bias current (I+ or I-) | Iib | 20 | 250 | nA | VCC+ = 5 V, VCC- = 0 V, Tamb = 25 °C | 7 | |
| Input bias current over temperature | Iib | 400 | nA | Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Large signal voltage gain | Avd | 50 | 200 | V/mV | VCC = 15 V, RL = 15 kΩ, Vo = 1 V to 11 V | 7 | |
| Supply current (all comparators) | ICC | 0.45 | 1 | mA | VCC = 5 V, no load | 7 | |
| Supply current (all comparators) | ICC | 0.6 | 2.5 | mA | VCC = 30 V, no load | 7 | |
| Low-level output voltage | VOL | 80 | 400 | mV | Vid = -1 V, Isink = 4 mA | 7 | |
| Low-level output voltage over temperature | VOL | 700 | mV | Tmin ≤ Tamb ≤ Tmax | 7 | ||
| High-level output current over temperature | IOH | 1 | μA | VCC = Vo = 30 V, Vid = 1 V, Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Output sink current | Isink | 6 | 18 | mA | Vid = 1 V, Vo = 1.5 V | 7 | |
| Supply voltage | VCC | 2 | 36 | V | (VCC+) - (VCC-) | 6 | |
| Common mode input voltage range | Vicm | 0 | V | VCC+ = 30 V, Tamb = 25 °C; high end (VCC+) - 1.5 V | 6 | ||
| Common mode input voltage range over temperature | Vicm | 0 | V | VCC+ = 30 V, Tmin ≤ Tamb ≤ Tmax; high end (VCC+) - 2 V | 6 | ||
| Operating free-air temperature range (LM393, LM393A) | Toper | 0 | 70 | °C | LM393, LM393A | 6 | |
| Supply voltage | VCC | 36 | V | Printed as ±18 or 36 V | 5 | ||
| Differential input voltage | Vid | -36 | 36 | V | 5 | ||
| Input voltage | Vin | -0.3 | 36 | V | 5 | ||
| Maximum junction temperature | Tj | 150 | °C | 5 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| Thermal resistance junction to ambient (TSSOP8) | Rthja | 120 | °C/W | Values are typical | 5 | ||
| Thermal resistance junction to case (TSSOP8) | Rthjc | 37 | °C/W | Values are typical | 5 | ||
| Input offset voltage | Vio | 1 | mV | VCC+ = 5 V, VCC- = 0 V, Tamb = 25 °C | 7 | ||
| High-level output current | IOH | 0.1 | nA | VCC = Vo = 30 V, Vid = 1 V, Tamb = 25 °C | 7 | ||
| Response time | tre | 1.3 | μs | RL = 5.1 kΩ connected to VCC+ | 7 | ||
| Large signal response time | trel | 300 | ns | RL = 5.1 kΩ connected to VCC+, VEL = TTL, V(ref) = 1.4 V | 7 |
CAD (KiCad official)
- Symbol:
LM393PT - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm393pt-etched.step/lm393pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm393pt.step/lm393pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (21 pp, sha256
dc3b85d8e0cb60ca, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).