main
History Download
Ray lm393dt: specified limits as data (metadata.characteristics, 27 rows from the datasheet) f4886b9

LM393DT

STMicroelectronics · Comparators · SO-8

LM393DT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Open-collector output of comparator 1; VOL 80 mV typ at Isink = 4 mA, max sink current 18 mA at Vo = 1.5 V; output can be shorted to GND indefinitely but not to VCC+.
2 IN1- input Inverting input of comparator 1; common-mode range 0 V to VCC+ −1.5 V (0 V to VCC+ −2 V over full temperature range); input bias current 20 nA typ, offset current ±3 nA typ.
3 IN1+ input Non-inverting input of comparator 1; common-mode range 0 V to VCC+ −1.5 V; input may go up to +30 V without damage regardless of VCC+; input bias current 20 nA typ.
4 VCC- power_in Negative supply (ground reference); supports single supply 0 V (with VCC+ 2 V to 36 V) or split supply down to −18 V; input common-mode range includes this rail.
5 IN2+ input Non-inverting input of comparator 2; common-mode range 0 V to VCC+ −1.5 V; input may go up to +30 V without damage regardless of VCC+; input bias current 20 nA typ.
6 IN2- input Inverting input of comparator 2; common-mode range 0 V to VCC+ −1.5 V (0 V to VCC+ −2 V over full temperature range); input bias current 20 nA typ, offset current ±3 nA typ.
7 OUT2 output Open-collector output of comparator 2; VOL 80 mV typ at Isink = 4 mA, max sink current 18 mA at Vo = 1.5 V; output can be shorted to GND indefinitely but not to VCC+.
8 VCC+ power_in Positive supply; 2 V to 36 V single supply or ±1 V to ±18 V split supply; quiescent current 0.45 mA typ / 1 mA max at VCC = +5 V for both comparators.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage (typ, 25 °C) Vio 1 5 mV VCC+ = +5 V, VCC- = 0 V, Tamb = +25 °C 6
Input offset voltage over temperature Vio 9 mV Tmin ≤ Tamb ≤ Tmax 6
Input offset current (25 °C) Iio 3 50 nA VCC+ = +5 V, VCC- = 0 V, Tamb = +25 °C 6
Input offset current over temperature Iio 150 nA Tmin ≤ Tamb ≤ Tmax 6
Input bias current (25 °C) Iib 20 250 nA VCC+ = +5 V, VCC- = 0 V, Tamb = +25 °C 6
Input bias current over temperature Iib 400 nA Tmin ≤ Tamb ≤ Tmax 6
Large signal voltage gain Avd 50 200 V/mV VCC = 15 V, RL = 15 kΩ, Vo = 1 V to 11 V 6
Supply current (all comparators) at +5 V ICC 0.45 1 mA VCC = +5 V, no load 6
Supply current (all comparators) at +30 V ICC 0.6 2.5 mA VCC = +30 V, no load 6
Low level output voltage (25 °C) VOL 80 400 mV Vid = -1 V, Isink = 4 mA 6
Low level output voltage over temperature VOL 700 mV Vid = -1 V, Isink = 4 mA, Tmin ≤ Tamb ≤ Tmax 6
High level output current (25 °C) IOH 0.1 1 nA VCC = Vo = 30 V, Vid = 1 V 6
High level output current over temperature IOH 1 μA VCC = Vo = 30 V, Vid = 1 V, Tmin ≤ Tamb ≤ Tmax 6
Output sink current Isink 6 18 mA Vid = 1 V, Vo = 1.5 V 6
Response time tre 1.3 μs RL = 5.1 kΩ connected to VCC+ 6
Large signal response time trel 300 ns RL = 5.1 kΩ connected to VCC+, TTL, V(ref) = +1.4 V 6
Supply voltage (VCC+ - VCC-) VCC 2 36 V VCC+ - VCC- 5
Common mode input voltage range (Tamb = +25 °C) Vicm 0 V VCC+ = 30 V, Tamb = +25 °C; upper limit printed as VCC+ - 1.5 V 5
Common mode input voltage range (over temperature) Vicm 0 V VCC+ = 30 V, Tmin ≤ Tamb ≤ Tmax; upper limit printed as VCC+ - 2 V 5
Operating free-air temperature range (LM393) Toper 0 70 °C LM393 grade 5
Supply voltage (absolute maximum) VCC 36 V Printed as ±18 or 36 V 5
Differential input voltage Vid -36 36 V Printed as ±36 V 5
Input voltage Vin -0.3 36 V 5
Maximum junction temperature Tj 150 °C 5
Storage temperature range Tstg -65 150 °C 5
Thermal resistance junction to ambient (SO-8) Rthja 125 °C/W SO-8 package; values are typical 5
Thermal resistance junction to case (SO-8) Rthjc 40 °C/W SO-8 package; values are typical 5

CAD (KiCad official)

  • Symbol: LM393DT
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lm393dt-etched.step / lm393dt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm393dt.step / lm393dt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (20 pp, sha256 ca5954afa6b325f5, retrieved 2026-09-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-sonnet-4-6 (text+vision), consensus claude-opus-4-7 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF