Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | |
| viewers | |
| lm393dt-etched.fit.json | |
| lm393dt-etched.glb | |
| lm393dt-etched.step | |
| lm393dt.glb | |
| lm393dt.kicad_mod | |
| lm393dt.kicad_sym | |
| lm393dt.lbr | |
| lm393dt.step | |
| package.json | |
| page.json | |
| README.md |
LM393DT
STMicroelectronics · Comparators · SO-8
LM393DT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Open-collector output of comparator 1; VOL 80 mV typ at Isink = 4 mA, max sink current 18 mA at Vo = 1.5 V; output can be shorted to GND indefinitely but not to VCC+. |
| 2 | IN1- | input | Inverting input of comparator 1; common-mode range 0 V to VCC+ −1.5 V (0 V to VCC+ −2 V over full temperature range); input bias current 20 nA typ, offset current ±3 nA typ. |
| 3 | IN1+ | input | Non-inverting input of comparator 1; common-mode range 0 V to VCC+ −1.5 V; input may go up to +30 V without damage regardless of VCC+; input bias current 20 nA typ. |
| 4 | VCC- | power_in | Negative supply (ground reference); supports single supply 0 V (with VCC+ 2 V to 36 V) or split supply down to −18 V; input common-mode range includes this rail. |
| 5 | IN2+ | input | Non-inverting input of comparator 2; common-mode range 0 V to VCC+ −1.5 V; input may go up to +30 V without damage regardless of VCC+; input bias current 20 nA typ. |
| 6 | IN2- | input | Inverting input of comparator 2; common-mode range 0 V to VCC+ −1.5 V (0 V to VCC+ −2 V over full temperature range); input bias current 20 nA typ, offset current ±3 nA typ. |
| 7 | OUT2 | output | Open-collector output of comparator 2; VOL 80 mV typ at Isink = 4 mA, max sink current 18 mA at Vo = 1.5 V; output can be shorted to GND indefinitely but not to VCC+. |
| 8 | VCC+ | power_in | Positive supply; 2 V to 36 V single supply or ±1 V to ±18 V split supply; quiescent current 0.45 mA typ / 1 mA max at VCC = +5 V for both comparators. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (typ, 25 °C) | Vio | 1 | 5 | mV | VCC+ = +5 V, VCC- = 0 V, Tamb = +25 °C | 6 | |
| Input offset voltage over temperature | Vio | 9 | mV | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input offset current (25 °C) | Iio | 3 | 50 | nA | VCC+ = +5 V, VCC- = 0 V, Tamb = +25 °C | 6 | |
| Input offset current over temperature | Iio | 150 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input bias current (25 °C) | Iib | 20 | 250 | nA | VCC+ = +5 V, VCC- = 0 V, Tamb = +25 °C | 6 | |
| Input bias current over temperature | Iib | 400 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Large signal voltage gain | Avd | 50 | 200 | V/mV | VCC = 15 V, RL = 15 kΩ, Vo = 1 V to 11 V | 6 | |
| Supply current (all comparators) at +5 V | ICC | 0.45 | 1 | mA | VCC = +5 V, no load | 6 | |
| Supply current (all comparators) at +30 V | ICC | 0.6 | 2.5 | mA | VCC = +30 V, no load | 6 | |
| Low level output voltage (25 °C) | VOL | 80 | 400 | mV | Vid = -1 V, Isink = 4 mA | 6 | |
| Low level output voltage over temperature | VOL | 700 | mV | Vid = -1 V, Isink = 4 mA, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| High level output current (25 °C) | IOH | 0.1 | 1 | nA | VCC = Vo = 30 V, Vid = 1 V | 6 | |
| High level output current over temperature | IOH | 1 | μA | VCC = Vo = 30 V, Vid = 1 V, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Output sink current | Isink | 6 | 18 | mA | Vid = 1 V, Vo = 1.5 V | 6 | |
| Response time | tre | 1.3 | μs | RL = 5.1 kΩ connected to VCC+ | 6 | ||
| Large signal response time | trel | 300 | ns | RL = 5.1 kΩ connected to VCC+, TTL, V(ref) = +1.4 V | 6 | ||
| Supply voltage (VCC+ - VCC-) | VCC | 2 | 36 | V | VCC+ - VCC- | 5 | |
| Common mode input voltage range (Tamb = +25 °C) | Vicm | 0 | V | VCC+ = 30 V, Tamb = +25 °C; upper limit printed as VCC+ - 1.5 V | 5 | ||
| Common mode input voltage range (over temperature) | Vicm | 0 | V | VCC+ = 30 V, Tmin ≤ Tamb ≤ Tmax; upper limit printed as VCC+ - 2 V | 5 | ||
| Operating free-air temperature range (LM393) | Toper | 0 | 70 | °C | LM393 grade | 5 | |
| Supply voltage (absolute maximum) | VCC | 36 | V | Printed as ±18 or 36 V | 5 | ||
| Differential input voltage | Vid | -36 | 36 | V | Printed as ±36 V | 5 | |
| Input voltage | Vin | -0.3 | 36 | V | 5 | ||
| Maximum junction temperature | Tj | 150 | °C | 5 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| Thermal resistance junction to ambient (SO-8) | Rthja | 125 | °C/W | SO-8 package; values are typical | 5 | ||
| Thermal resistance junction to case (SO-8) | Rthjc | 40 | °C/W | SO-8 package; values are typical | 5 |
CAD (KiCad official)
- Symbol:
LM393DT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lm393dt-etched.step/lm393dt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm393dt.step/lm393dt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (20 pp, sha256
ca5954afa6b325f5, retrieved 2026-09-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-4-6(text+vision), consensusclaude-opus-4-7(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).