main
Ray
Publish 0.1.0
f8936e6
LM3743MM-300
Texas Instruments · DC-DC Controllers · VSSOP-10-0.5mm
LM3743MM-300 from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Controller supply rail (3.0V to 5.5V) needing at least 1 µF MLCC close to VCC and GND, with a 1 to 4.99Ω series resistor from the supply rail. |
| 2 | LGATE | output | Gate drive for the low-side N-channel MOSFET, interlocked with HGATE to avoid shoot-through. |
| 3 | GND | power_in | Power ground (PGND) and signal ground (SGND); the bottom feedback resistor connects between this pin and FB. |
| 4 | ILIM | passive | Low-side current limit threshold setting pin that sources a fixed 50 µA, with a resistor connected to the drain of the low-side N-FET. |
| 5 | FB | input | Feedback pin, the inverting input of the error amplifier, used to sense the output voltage and compensate the control loop (regulates at 0.8V). |
| 6 | COMP/EN | bidirectional | Error amplifier output and enable pin used for loop compensation; forcing this pin to ground shuts down the IC. |
| 7 | SS/TRACK | bidirectional | Soft-start and tracking pin connected to the error amplifier non-inverting input during soft-start, sourcing 10.2 µA typical; a resistor divider from another supply output enables tracking. |
| 8 | SW | passive | Switch node pin, the lower rail of the high-side N-FET driver, also used for high-side current limit sensing. |
| 9 | HGATE | output | Gate drive for the high-side N-channel MOSFET, interlocked with LGATE to avoid shoot-through. |
| 10 | BOOT | power_in | Supply rail for the high-side N-channel MOSFET gate drive, which must be at least one gate threshold above the regulator input voltage (absolute max 12V to GND, 6V to SW). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Power Supply Chip |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| FB pin voltage in regulation | VFB | 0.786 | 0.8 | 0.814 | V | 3.0V ≤ VCC ≤ 5.5V | 3 |
| UVLO threshold rising | VUVLO | 2.84 | 3 | V | Input voltage rising | 3 | |
| UVLO threshold falling | VUVLO | 2.45 | 2.66 | V | Input voltage falling | 3 | |
| Operating VCC current | IVCC | 1.5 | 2.5 | mA | fSW = 300 kHz, LM3743-300 | 3 | |
| Shutdown VCC current | 6 | 50 | µA | COMP/EN = 0V | 3 | ||
| SS/TRACK pin source current | ISS/TRACK | 8 | 10.2 | 12.5 | µA | VSS/TRACK = 0V | 3 |
| ILIM pin source current | IILIM | 42.5 | 50 | 57.5 | µA | VILIM = 0V | 3 |
| Current Limit Trip Level | VILIM | -25 | 0 | 25 | mV | 3 | |
| COMP/EN pin pull-up current | ICOMP/EN | 4 | µA | VCOMP/EN = 0V | 3 | ||
| High-side current limit threshold | VHS-CLIM | 500 | mV | Measured at VCC pin with respect to SW | 3 | ||
| FB pin Bias Current | IFB | 10 | 200 | nA | 3 | ||
| BOOT Pin Shutdown Current | ISHDN-BOOT | 25 | 50 | µA | VBOOT-VSW = 3.3V, VCOMP/EN = 0V | 3 | |
| Oscillator Frequency | fSW | 255 | 300 | 345 | kHz | 3.0V ≤ VCC ≤ 5.5V, LM3743-300 | 4 |
| Max Duty Cycle | DMAX | 85 | 91 | % | fSW = 300 kHz, LM3743-300 | 4 | |
| COMP/EN pin logic high trip-point | VCOMP/EN-HI | 0.65 | 0.9 | V | 4 | ||
| COMP/EN pin logic low trip-point | VCOMP/EN-LO | 0.1 | 0.45 | V | 4 | ||
| High Side Driver Pull-up ON resistance | RHG-UP | 1.6 | Ω | VBOOT-VSW = 3.3V, IHGATE = 350mA | 4 | ||
| High Side Driver Pull-down ON resistance | RHG-DN | 1 | Ω | VBOOT-VSW = 3.3V, IHGATE = 350mA | 4 | ||
| Junction to Ambient Thermal Resistance | θJA | 235 | °C/W | 4 | |||
| Supply Voltage Range | VCC | 3 | 5.5 | V | 3 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| VCC | VCC | -0.3 | 6 | V | 3 | ||
| SW to GND | -0.3 | 6 | V | 3 | |||
| Boot to GND | -0.3 | 12 | V | 3 | |||
| Boot to SW | -0.3 | 6 | V | 3 | |||
| SS/TRACK, ILIM, COMP/EN, FB to GND | -0.3 | 6 | V | -0.3V to VCC | 3 | ||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature | Tstg | -65 | 150 | °C | 3 | ||
| Lead Temperature | 260 | °C | soldering, 10sec | 3 | |||
| ESD Rating | -2 | 2 | kV | Human body model, 100 pF, 1.5 kΩ | 3 |
CAD (KiCad official)
- Symbol:
LM3743MM-300 - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
lm3743mm-300-etched.step/lm3743mm-300-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm3743mm-300.step/lm3743mm-300.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
9c8bfeb2b340733d, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM3743MM-300
**Texas Instruments** · DC-DC Controllers · VSSOP-10-0.5mm
LM3743MM-300 from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Controller supply rail (3.0V to 5.5V) needing at least 1 µF MLCC close to VCC and GND, with a 1 to 4.99Ω series resistor from the supply rail. |
| 2 | LGATE | output | Gate drive for the low-side N-channel MOSFET, interlocked with HGATE to avoid shoot-through. |
| 3 | GND | power_in | Power ground (PGND) and signal ground (SGND); the bottom feedback resistor connects between this pin and FB. |
| 4 | ILIM | passive | Low-side current limit threshold setting pin that sources a fixed 50 µA, with a resistor connected to the drain of the low-side N-FET. |
| 5 | FB | input | Feedback pin, the inverting input of the error amplifier, used to sense the output voltage and compensate the control loop (regulates at 0.8V). |
| 6 | COMP/EN | bidirectional | Error amplifier output and enable pin used for loop compensation; forcing this pin to ground shuts down the IC. |
| 7 | SS/TRACK | bidirectional | Soft-start and tracking pin connected to the error amplifier non-inverting input during soft-start, sourcing 10.2 µA typical; a resistor divider from another supply output enables tracking. |
| 8 | SW | passive | Switch node pin, the lower rail of the high-side N-FET driver, also used for high-side current limit sensing. |
| 9 | HGATE | output | Gate drive for the high-side N-channel MOSFET, interlocked with LGATE to avoid shoot-through. |
| 10 | BOOT | power_in | Supply rail for the high-side N-channel MOSFET gate drive, which must be at least one gate threshold above the regulator input voltage (absolute max 12V to GND, 6V to SW). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Power Supply Chip |
| Pins | 10 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| FB pin voltage in regulation | VFB | 0.786 | 0.8 | 0.814 | V | 3.0V ≤ VCC ≤ 5.5V | 3 |
| UVLO threshold rising | VUVLO | | 2.84 | 3 | V | Input voltage rising | 3 |
| UVLO threshold falling | VUVLO | 2.45 | 2.66 | | V | Input voltage falling | 3 |
| Operating VCC current | IVCC | | 1.5 | 2.5 | mA | fSW = 300 kHz, LM3743-300 | 3 |
| Shutdown VCC current | | | 6 | 50 | µA | COMP/EN = 0V | 3 |
| SS/TRACK pin source current | ISS/TRACK | 8 | 10.2 | 12.5 | µA | VSS/TRACK = 0V | 3 |
| ILIM pin source current | IILIM | 42.5 | 50 | 57.5 | µA | VILIM = 0V | 3 |
| Current Limit Trip Level | VILIM | -25 | 0 | 25 | mV | | 3 |
| COMP/EN pin pull-up current | ICOMP/EN | | 4 | | µA | VCOMP/EN = 0V | 3 |
| High-side current limit threshold | VHS-CLIM | | 500 | | mV | Measured at VCC pin with respect to SW | 3 |
| FB pin Bias Current | IFB | | 10 | 200 | nA | | 3 |
| BOOT Pin Shutdown Current | ISHDN-BOOT | | 25 | 50 | µA | VBOOT-VSW = 3.3V, VCOMP/EN = 0V | 3 |
| Oscillator Frequency | fSW | 255 | 300 | 345 | kHz | 3.0V ≤ VCC ≤ 5.5V, LM3743-300 | 4 |
| Max Duty Cycle | DMAX | 85 | 91 | | % | fSW = 300 kHz, LM3743-300 | 4 |
| COMP/EN pin logic high trip-point | VCOMP/EN-HI | 0.65 | | 0.9 | V | | 4 |
| COMP/EN pin logic low trip-point | VCOMP/EN-LO | 0.1 | | 0.45 | V | | 4 |
| High Side Driver Pull-up ON resistance | RHG-UP | | 1.6 | | Ω | VBOOT-VSW = 3.3V, IHGATE = 350mA | 4 |
| High Side Driver Pull-down ON resistance | RHG-DN | | 1 | | Ω | VBOOT-VSW = 3.3V, IHGATE = 350mA | 4 |
| Junction to Ambient Thermal Resistance | θJA | | 235 | | °C/W | | 4 |
| Supply Voltage Range | VCC | 3 | | 5.5 | V | | 3 |
| Junction Temperature Range | TJ | -40 | | 125 | °C | | 3 |
| VCC | VCC | -0.3 | | 6 | V | | 3 |
| SW to GND | | -0.3 | | 6 | V | | 3 |
| Boot to GND | | -0.3 | | 12 | V | | 3 |
| Boot to SW | | -0.3 | | 6 | V | | 3 |
| SS/TRACK, ILIM, COMP/EN, FB to GND | | -0.3 | | 6 | V | -0.3V to VCC | 3 |
| Junction Temperature | TJ | | | 150 | °C | | 3 |
| Storage Temperature | Tstg | -65 | | 150 | °C | | 3 |
| Lead Temperature | | | | 260 | °C | soldering, 10sec | 3 |
| ESD Rating | | -2 | | 2 | kV | Human body model, 100 pF, 1.5 kΩ | 3 |
## CAD (KiCad official)
- Symbol: `LM3743MM-300`
- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`
- 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files: `lm3743mm-300-etched.step` / `lm3743mm-300-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm3743mm-300.step` / `lm3743mm-300.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm3743) (39 pp, sha256 `9c8bfeb2b340733d`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm3743mm-300-datasheet.pdf)