main
Ray
Publish 0.1.0
619ca64
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294
{
"slug": "lm3549sqe",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments LED Drivers, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"nixie tube driver-led driver",
"lm3549sqe",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm3549sqe.kicad_sym",
"lm3549sqe.kicad_mod",
"lm3549sqe.glb",
"lm3549sqe.step",
"lm3549sqe.lbr",
"docs/hero.png",
"docs/lm3549sqe-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lm3549sqe-hero.glb",
"lm3549sqe-hero.overlay.json"
],
"component": {
"mpn": "LM3549SQE",
"manufacturer": "Texas Instruments",
"package": "WQFN-24-EP(4x4)",
"pin_count": 25,
"category": "Nixie Tube Driver/LED Driver",
"subcategory": "LED Drivers",
"datasheet": "https://www.ti.com/cn/lit/gpn/lm3549",
"parts": {
"symbol": "lm3549sqe.kicad_sym",
"footprint": "lm3549sqe.kicad_mod",
"model_3d": "lm3549sqe-hero.glb",
"model_3d_plain": "lm3549sqe.glb",
"model_3d_step": "lm3549sqe-etched.step",
"model_3d_step_plain": "lm3549sqe.step",
"lbr": "lm3549sqe.lbr"
},
"distributor_links": {
"lcsc": "C2679295"
},
"distributor_check": {
"checked_at": "2026-10-08T23:08:48Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "NC",
"type": "unconnected",
"description": "Marked NC (no connect) in the pin description table, with no function assigned."
},
{
"number": "2",
"name": "L1",
"type": "passive",
"description": "Inductor positive terminal 1 of the buck-boost SMPS, connected to the 2.2 µH inductor shown in the typical application circuit."
},
{
"number": "3",
"name": "L1",
"type": "passive",
"description": "Inductor positive terminal 2 of the buck-boost SMPS; pins 2 and 3 are both L1 and are tied together to the inductor."
},
{
"number": "4",
"name": "GND_SW",
"type": "power_in",
"description": "SMPS ground for the buck-boost converter switching section."
},
{
"number": "5",
"name": "L2",
"type": "passive",
"description": "Inductor negative terminal 1 of the buck-boost SMPS; pins 5 and 6 are both L2 and are tied together to the inductor."
},
{
"number": "6",
"name": "L2",
"type": "passive",
"description": "Inductor negative terminal 2 of the buck-boost SMPS; pins 5 and 6 are both L2 and are tied together to the inductor."
},
{
"number": "7",
"name": "VOUT",
"type": "passive",
"description": "Buck-boost output terminal 1; VDD and VOUT pins are rated −0.3 V to 6.0 V (absolute maximum)."
},
{
"number": "8",
"name": "NC",
"type": "unconnected",
"description": "Marked NC (no connect) in the pin description table, with no function assigned."
},
{
"number": "9",
"name": "VOUT",
"type": "passive",
"description": "Buck-boost output terminal 2; pins 7 and 9 are both VOUT and are rated −0.3 V to 6.0 V (absolute maximum)."
},
{
"number": "10",
"name": "R_EN",
"type": "input",
"description": "Red output enable digital input; non-supply pins are limited to −0.3 V to VIN+0.3 V with a 6.0 V maximum."
},
{
"number": "11",
"name": "VDDS",
"type": "power_in",
"description": "Supply voltage for the device; input voltage range is 2.7 V to 5.5 V."
},
{
"number": "12",
"name": "G_EN",
"type": "input",
"description": "Green output enable digital input; non-supply pins are limited to −0.3 V to VIN+0.3 V with a 6.0 V maximum."
},
{
"number": "13",
"name": "B_EN",
"type": "input",
"description": "Blue output enable digital input; non-supply pins are limited to −0.3 V to VIN+0.3 V with a 6.0 V maximum."
},
{
"number": "14",
"name": "PWM",
"type": "input",
"description": "Master fader digital input that controls total brightness; non-supply pins are limited to −0.3 V to VIN+0.3 V with a 6.0 V maximum."
},
{
"number": "15",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device; all voltages are referenced to this pin."
},
{
"number": "16",
"name": "R_OUT",
"type": "passive",
"description": "Red LED constant-current output."
},
{
"number": "17",
"name": "G_OUT",
"type": "passive",
"description": "Green LED constant-current output."
},
{
"number": "18",
"name": "B_OUT",
"type": "passive",
"description": "Blue LED constant-current output."
},
{
"number": "19",
"name": "FAULT",
"type": "output",
"description": "Fault detection interrupt output; active LOW open-drain output."
},
{
"number": "20",
"name": "SDA",
"type": "bidirectional",
"description": "I2C data line."
},
{
"number": "21",
"name": "SCL",
"type": "input",
"description": "I2C clock input."
},
{
"number": "22",
"name": "EN",
"type": "input",
"description": "Device enable input that also sets the I/O reference level; non-supply pins are limited to −0.3 V to VIN+0.3 V with a 6.0 V maximum."
},
{
"number": "23",
"name": "VDDP",
"type": "power_in",
"description": "SMPS supply voltage for the buck-boost converter; input voltage range is 2.7 V to 5.5 V."
},
{
"number": "24",
"name": "NC",
"type": "unconnected",
"description": "Marked NC (no connect) in the pin description table, with no function assigned."
},
{
"number": "25",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The package hint says WQFN-24-EP(4x4), but the datasheet text does not mention an exposed pad, its p; The datasheet pin table lists 'Pin No.' values 1 through 24 with no separate EP entry. Pins 1, 8 and; Pin types were mapped to KiCad ERC classes from the datasheet abbreviations: A (analog) mapped to pa",
"exposed pad 25 added from the footprint"
],
"pages_sent": 6,
"cost_usd": 0.0511,
"at": "2026-10-08T23:07:54"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/lm3549",
"pages": 28,
"sha256": "912c4e49951a58aa",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 25,
"described": 25,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm3549sqe.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",
"checked": "2026-10-08",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm3549sqe-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "11c43d2c30b3bc68f5c7f6a4ba9e7c0012f7ee7dae5dfbd853112ae0d7fb450b",
"checked": "2026-10-08",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}