3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM3549SQE
Texas Instruments · LED Drivers · WQFN-24-EP(4x4)
LM3549SQE from Texas Instruments, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Marked NC (no connect) in the pin description table, with no function assigned. |
| 2 | L1 | passive | Inductor positive terminal 1 of the buck-boost SMPS, connected to the 2.2 µH inductor shown in the typical application circuit. |
| 3 | L1 | passive | Inductor positive terminal 2 of the buck-boost SMPS; pins 2 and 3 are both L1 and are tied together to the inductor. |
| 4 | GND_SW | power_in | SMPS ground for the buck-boost converter switching section. |
| 5 | L2 | passive | Inductor negative terminal 1 of the buck-boost SMPS; pins 5 and 6 are both L2 and are tied together to the inductor. |
| 6 | L2 | passive | Inductor negative terminal 2 of the buck-boost SMPS; pins 5 and 6 are both L2 and are tied together to the inductor. |
| 7 | VOUT | passive | Buck-boost output terminal 1; VDD and VOUT pins are rated −0.3 V to 6.0 V (absolute maximum). |
| 8 | NC | unconnected | Marked NC (no connect) in the pin description table, with no function assigned. |
| 9 | VOUT | passive | Buck-boost output terminal 2; pins 7 and 9 are both VOUT and are rated −0.3 V to 6.0 V (absolute maximum). |
| 10 | R_EN | input | Red output enable digital input; non-supply pins are limited to −0.3 V to VIN+0.3 V with a 6.0 V maximum. |
| 11 | VDDS | power_in | Supply voltage for the device; input voltage range is 2.7 V to 5.5 V. |
| 12 | G_EN | input | Green output enable digital input; non-supply pins are limited to −0.3 V to VIN+0.3 V with a 6.0 V maximum. |
| 13 | B_EN | input | Blue output enable digital input; non-supply pins are limited to −0.3 V to VIN+0.3 V with a 6.0 V maximum. |
| 14 | PWM | input | Master fader digital input that controls total brightness; non-supply pins are limited to −0.3 V to VIN+0.3 V with a 6.0 V maximum. |
| 15 | GND | power_in | Ground reference for the device; all voltages are referenced to this pin. |
| 16 | R_OUT | passive | Red LED constant-current output. |
| 17 | G_OUT | passive | Green LED constant-current output. |
| 18 | B_OUT | passive | Blue LED constant-current output. |
| 19 | FAULT | output | Fault detection interrupt output; active LOW open-drain output. |
| 20 | SDA | bidirectional | I2C data line. |
| 21 | SCL | input | I2C clock input. |
| 22 | EN | input | Device enable input that also sets the I/O reference level; non-supply pins are limited to −0.3 V to VIN+0.3 V with a 6.0 V maximum. |
| 23 | VDDP | power_in | SMPS supply voltage for the buck-boost converter; input voltage range is 2.7 V to 5.5 V. |
| 24 | NC | unconnected | Marked NC (no connect) in the pin description table, with no function assigned. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-24-EP(4x4) |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 25 |
CAD (KiCad official)
- Symbol:
LM3549SQE - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm - 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
lm3549sqe-etched.step/lm3549sqe-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm3549sqe.step/lm3549sqe.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
912c4e49951a58aa, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).