main
Ray
Publish 0.1.0
80e4630
LM3480IM3X-15
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-3
LM3480IM3X-15 from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated 15-V output (15 V ±5% over temperature) delivering up to 100 mA, requiring at least 0.1 µF output capacitance for stability. |
| 2 | IN | power_in | Input voltage supply, operating up to 30 V (absolute maximum 35 V) with a 0.1 µF minimum input capacitor and a maximum dropout of 1.2 V at 100 mA. |
| 3 | GND | power_in | Common ground for input and output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 14.4 | 15 | 15.6 | V | VIN = VNOM + 1.5 V, 1 mA ≤ IOUT ≤ 100 mA, TJ = 25°C | 6 |
| Output voltage (over temperature) | VOUT | 14.25 | 15.75 | V | VIN = VNOM + 1.5 V, 1 mA ≤ IOUT ≤ 100 mA, −40°C ≤ TJ ≤ 125°C | 6 | |
| Line regulation | ΔVOUT | 16 | mV | VNOM + 1.5 V ≤ VIN ≤ 30 V, IOUT = 1 mA | 6 | ||
| Line regulation (over temperature) | ΔVOUT | 40 | mV | VNOM + 1.5 V ≤ VIN ≤ 30 V, IOUT = 1 mA, −40°C ≤ TJ ≤ 125°C | 6 | ||
| Load regulation | ΔVOUT | 45 | mV | VIN = VNOM + 1.5 V, 10 mA ≤ IOUT ≤ 100 mA | 6 | ||
| Load regulation (over temperature) | ΔVOUT | 75 | mV | VIN = VNOM + 1.5 V, 10 mA ≤ IOUT ≤ 100 mA, −40°C ≤ TJ ≤ 125°C | 6 | ||
| Ground pin current | IGND | 2 | mA | VNOM + 1.5 V ≤ VIN ≤ 30 V, No Load | 6 | ||
| Ground pin current (over temperature) | IGND | 4 | mA | VNOM + 1.5 V ≤ VIN ≤ 30 V, No Load, −40°C ≤ TJ ≤ 125°C | 6 | ||
| Dropout voltage | VIN - VOUT | 0.7 | 0.9 | V | IOUT = 10 mA | 6 | |
| Dropout voltage (over temperature) | VIN - VOUT | 1 | V | IOUT = 10 mA, −40°C ≤ TJ ≤ 125°C | 6 | ||
| Dropout voltage | VIN - VOUT | 0.9 | 1.1 | V | IOUT = 100 mA | 6 | |
| Dropout voltage (over temperature) | VIN - VOUT | 1.2 | V | IOUT = 100 mA, −40°C ≤ TJ ≤ 125°C | 6 | ||
| Output noise voltage | en | 360 | 450 | µVrms | VIN = 10 V, Bandwidth: 10 Hz to 100 kHz | 6 | |
| Input voltage (IN to GND) | -0.3 | 35 | V | 4 | |||
| Junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human-body model, ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD CDM | V(ESD) | -500 | 500 | V | Charged-device model, JESD22-C101 | 4 | |
| Maximum input voltage (IN to GND) | 0 | 30 | V | 4 | |||
| Junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 269.6 | °C/W | SOT-23 (DBZ), 3 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 141.1 | °C/W | SOT-23 (DBZ), 3 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 63.1 | °C/W | SOT-23 (DBZ), 3 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 24.2 | °C/W | SOT-23 (DBZ), 3 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 62.1 | °C/W | SOT-23 (DBZ), 3 pins | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | capacitors, and to the LDO ground pin as close to each other as possible, connected by a wide, component-side, copper surface. The use of vias and long traces to create LDO circuit connections is stro | 13 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM3480IM3X-15 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.12 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm3480im3x-15-etched.step/lm3480im3x-15-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm3480im3x-15.step/lm3480im3x-15.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
0bb9a9e9487a47c3, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# LM3480IM3X-15
**Texas Instruments** · Linear Voltage Regulators (LDO) · SOT-23-3
LM3480IM3X-15 from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated 15-V output (15 V ±5% over temperature) delivering up to 100 mA, requiring at least 0.1 µF output capacitance for stability. |
| 2 | IN | power_in | Input voltage supply, operating up to 30 V (absolute maximum 35 V) with a 0.1 µF minimum input capacitor and a maximum dropout of 1.2 V at 100 mA. |
| 3 | GND | power_in | Common ground for input and output. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-3 |
| Category | Power Supply Chip |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 14.4 | 15 | 15.6 | V | VIN = VNOM + 1.5 V, 1 mA ≤ IOUT ≤ 100 mA, TJ = 25°C | 6 |
| Output voltage (over temperature) | VOUT | 14.25 | | 15.75 | V | VIN = VNOM + 1.5 V, 1 mA ≤ IOUT ≤ 100 mA, −40°C ≤ TJ ≤ 125°C | 6 |
| Line regulation | ΔVOUT | | | 16 | mV | VNOM + 1.5 V ≤ VIN ≤ 30 V, IOUT = 1 mA | 6 |
| Line regulation (over temperature) | ΔVOUT | | | 40 | mV | VNOM + 1.5 V ≤ VIN ≤ 30 V, IOUT = 1 mA, −40°C ≤ TJ ≤ 125°C | 6 |
| Load regulation | ΔVOUT | | | 45 | mV | VIN = VNOM + 1.5 V, 10 mA ≤ IOUT ≤ 100 mA | 6 |
| Load regulation (over temperature) | ΔVOUT | | | 75 | mV | VIN = VNOM + 1.5 V, 10 mA ≤ IOUT ≤ 100 mA, −40°C ≤ TJ ≤ 125°C | 6 |
| Ground pin current | IGND | | | 2 | mA | VNOM + 1.5 V ≤ VIN ≤ 30 V, No Load | 6 |
| Ground pin current (over temperature) | IGND | | | 4 | mA | VNOM + 1.5 V ≤ VIN ≤ 30 V, No Load, −40°C ≤ TJ ≤ 125°C | 6 |
| Dropout voltage | VIN - VOUT | | 0.7 | 0.9 | V | IOUT = 10 mA | 6 |
| Dropout voltage (over temperature) | VIN - VOUT | | | 1 | V | IOUT = 10 mA, −40°C ≤ TJ ≤ 125°C | 6 |
| Dropout voltage | VIN - VOUT | | 0.9 | 1.1 | V | IOUT = 100 mA | 6 |
| Dropout voltage (over temperature) | VIN - VOUT | | | 1.2 | V | IOUT = 100 mA, −40°C ≤ TJ ≤ 125°C | 6 |
| Output noise voltage | en | | 360 | 450 | µVrms | VIN = 10 V, Bandwidth: 10 Hz to 100 kHz | 6 |
| Input voltage (IN to GND) | | -0.3 | | 35 | V | | 4 |
| Junction temperature | TJ | -40 | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| ESD HBM | V(ESD) | -2000 | | 2000 | V | Human-body model, ANSI/ESDA/JEDEC JS-001 | 4 |
| ESD CDM | V(ESD) | -500 | | 500 | V | Charged-device model, JESD22-C101 | 4 |
| Maximum input voltage (IN to GND) | | 0 | | 30 | V | | 4 |
| Junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 269.6 | | °C/W | SOT-23 (DBZ), 3 pins | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 141.1 | | °C/W | SOT-23 (DBZ), 3 pins | 4 |
| Junction-to-board thermal resistance | RθJB | | 63.1 | | °C/W | SOT-23 (DBZ), 3 pins | 4 |
| Junction-to-top characterization parameter | ψJT | | 24.2 | | °C/W | SOT-23 (DBZ), 3 pins | 4 |
| Junction-to-board characterization parameter | ψJB | | 62.1 | | °C/W | SOT-23 (DBZ), 3 pins | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | capacitors, and to the LDO ground pin as close to each other as possible, connected by a wide, component-side, copper surface. The use of vias and long traces to create LDO circuit connections is stro | 13 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `LM3480IM3X-15`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.12 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lm3480im3x-15-etched.step` / `lm3480im3x-15-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm3480im3x-15.step` / `lm3480im3x-15.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm3480im3x-15.pdf) (23 pp, sha256 `0bb9a9e9487a47c3`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/lm3480im3x-15-datasheet.pdf)