main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm3480im3x-15: viewers rendered from the public page · Ray
lm3480im3x-15-etched.glb lm3480im3x-15: factory component page (tier=mfr) · Ray
lm3480im3x-15-etched.step lm3480im3x-15: factory component page (tier=mfr) · Ray
lm3480im3x-15-hero.glb lm3480im3x-15: hero GLB from the etched model (keeps the MPN mark) · Ray
lm3480im3x-15-hero.overlay.json lm3480im3x-15: hero GLB from the etched model (keeps the MPN mark) · Ray
lm3480im3x-15.glb Publish 0.1.0 · Ray
lm3480im3x-15.kicad_mod Publish 0.1.0 · Ray
lm3480im3x-15.kicad_sym Publish 0.1.0 · Ray
lm3480im3x-15.lbr Publish 0.1.0 · Ray
lm3480im3x-15.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 3 pins · Ray

LM3480IM3X-15

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-3

LM3480IM3X-15 from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 OUT power_out Regulated 15-V output (15 V ±5% over temperature) delivering up to 100 mA, requiring at least 0.1 µF output capacitance for stability.
2 IN power_in Input voltage supply, operating up to 30 V (absolute maximum 35 V) with a 0.1 µF minimum input capacitor and a maximum dropout of 1.2 V at 100 mA.
3 GND power_in Common ground for input and output.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-3
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage VOUT 14.4 15 15.6 V VIN = VNOM + 1.5 V, 1 mA ≤ IOUT ≤ 100 mA, TJ = 25°C 6
Output voltage (over temperature) VOUT 14.25 15.75 V VIN = VNOM + 1.5 V, 1 mA ≤ IOUT ≤ 100 mA, −40°C ≤ TJ ≤ 125°C 6
Line regulation ΔVOUT 16 mV VNOM + 1.5 V ≤ VIN ≤ 30 V, IOUT = 1 mA 6
Line regulation (over temperature) ΔVOUT 40 mV VNOM + 1.5 V ≤ VIN ≤ 30 V, IOUT = 1 mA, −40°C ≤ TJ ≤ 125°C 6
Load regulation ΔVOUT 45 mV VIN = VNOM + 1.5 V, 10 mA ≤ IOUT ≤ 100 mA 6
Load regulation (over temperature) ΔVOUT 75 mV VIN = VNOM + 1.5 V, 10 mA ≤ IOUT ≤ 100 mA, −40°C ≤ TJ ≤ 125°C 6
Ground pin current IGND 2 mA VNOM + 1.5 V ≤ VIN ≤ 30 V, No Load 6
Ground pin current (over temperature) IGND 4 mA VNOM + 1.5 V ≤ VIN ≤ 30 V, No Load, −40°C ≤ TJ ≤ 125°C 6
Dropout voltage VIN - VOUT 0.7 0.9 V IOUT = 10 mA 6
Dropout voltage (over temperature) VIN - VOUT 1 V IOUT = 10 mA, −40°C ≤ TJ ≤ 125°C 6
Dropout voltage VIN - VOUT 0.9 1.1 V IOUT = 100 mA 6
Dropout voltage (over temperature) VIN - VOUT 1.2 V IOUT = 100 mA, −40°C ≤ TJ ≤ 125°C 6
Output noise voltage en 360 450 µVrms VIN = 10 V, Bandwidth: 10 Hz to 100 kHz 6
Input voltage (IN to GND) -0.3 35 V 4
Junction temperature TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
ESD HBM V(ESD) -2000 2000 V Human-body model, ANSI/ESDA/JEDEC JS-001 4
ESD CDM V(ESD) -500 500 V Charged-device model, JESD22-C101 4
Maximum input voltage (IN to GND) 0 30 V 4
Junction temperature TJ -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 269.6 °C/W SOT-23 (DBZ), 3 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 141.1 °C/W SOT-23 (DBZ), 3 pins 4
Junction-to-board thermal resistance RθJB 63.1 °C/W SOT-23 (DBZ), 3 pins 4
Junction-to-top characterization parameter ψJT 24.2 °C/W SOT-23 (DBZ), 3 pins 4
Junction-to-board characterization parameter ψJB 62.1 °C/W SOT-23 (DBZ), 3 pins 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper capacitors, and to the LDO ground pin as close to each other as possible, connected by a wide, component-side, copper surface. The use of vias and long traces to create LDO circuit connections is stro 13

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM3480IM3X-15
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.12 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm3480im3x-15-etched.step / lm3480im3x-15-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm3480im3x-15.step / lm3480im3x-15.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 0bb9a9e9487a47c3, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF