main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm3410ymf: viewers rendered from the public page · Ray
lm3410ymf-etched.glb lm3410ymf: factory component page (tier=mfr) · Ray
lm3410ymf-etched.step lm3410ymf: factory component page (tier=mfr) · Ray
lm3410ymf-hero.glb lm3410ymf: hero GLB from the etched model (keeps the MPN mark) · Ray
lm3410ymf-hero.overlay.json lm3410ymf: hero GLB from the etched model (keeps the MPN mark) · Ray
lm3410ymf.glb Publish 0.1.0 · Ray
lm3410ymf.kicad_mod Publish 0.1.0 · Ray
lm3410ymf.kicad_sym Publish 0.1.0 · Ray
lm3410ymf.lbr Publish 0.1.0 · Ray
lm3410ymf.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

LM3410YMF

Texas Instruments · LED Drivers · SOT-23-5

LM3410YMF from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 SW output Output switch pin, connected to the inductor and output diode; recommended switch voltage is 3 V to 24 V, with an absolute maximum of 26.5 V.
2 GND power_in Signal and power ground pin; place the bottom resistor of the feedback network as close as possible to this pin.
3 FB input Feedback pin; connect an external resistor from FB to GND to set the LED output current, with a 190 mV typical feedback voltage (178 mV to 202 mV) and an absolute maximum of 3 V.
4 DIM input Dimming and shutdown control input; logic high enables operation with 0% to 100% duty cycle, and the pin must not float or exceed VIN + 0.3 V.
5 VIN power_in Supply voltage pin for the power stage and input supply, with a recommended range of 2.7 V to 5.5 V and an absolute maximum of 7 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Nixie Tube Driver/LED Driver
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN VIN -0.5 7 V 4
Input voltage SW SW -0.5 26.5 V 4
Input voltage FB FB -0.5 3 V 4
Input voltage DIM DIM -0.5 7 V 4
Operating junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Input voltage VIN 2.7 5.5 V 4
DIM control input VDIM 0 5.5 V 0 to VIN; do not allow to float or exceed VIN + 0.3 V 4
Switch output VSW 3 24 V 4
Operating junction temperature TJ -40 125 °C 4
Power dissipation (Internal) SOT-23 400 mW SOT-23 4
Junction-to-ambient thermal resistance RθJA 164.2 °C/W DBV (SOT-23), 0 LFPM air flow 4
Junction-to-case (top) thermal resistance RθJC(top) 115.3 °C/W DBV (SOT-23) 4
Junction-to-board thermal resistance RθJB 27 °C/W DBV (SOT-23) 4
Junction-to-top characterization parameter ψJT 12.8 °C/W DBV (SOT-23) 4
Junction-to-board characterization parameter ψJB 26.5 °C/W DBV (SOT-23) 4
Feedback voltage VFB 178 190 202 mV VIN = 5 V, TJ = -40°C to 125°C for min/max 5
Feedback input bias current IFB 0.1 1 µA 5
Switching frequency (LM3410Y) fSW 360 525 680 kHz LM3410Y 5
Maximum duty cycle (LM3410Y) DMAX 90 95 % LM3410Y 5
Minimum duty cycle (LM3410Y) DMIN 2 % LM3410Y 5
Switch on resistance RDS(ON) 170 330 mΩ MSOP and SOT-23 5
Switch current limit ICL 2.1 2.8 A 5
Quiescent current (switching), LM3410Y IQ 3.4 7 mA LM3410Y, VFB = 0.25 V 5
Quiescent current (shutdown) IQ 80 nA All versions, VDIM = 0 V 5
Undervoltage lockout, VIN rising UVLO 2.3 2.65 V VIN rising 5
Undervoltage lockout, VIN falling UVLO 1.7 1.9 V VIN falling 5
Shutdown threshold voltage VDIM_H 0.4 V 5
Enable threshold voltage VDIM_H 1.8 V 5
Switch leakage ISW 1 µA VSW = 24 V 5
Dimming pin current IDIM 100 nA Sink and source 5
Start-up time SU 20 µs 5
Feedback voltage line regulation ΔVFB/VIN 0.06 %/V VIN = 2.7 V to 5.5 V 5
Thermal shutdown temperature TSD 165 °C 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper For 5-pin SOT-23 package typical applications, RθJA numbers range from 164.2°C/W, and RθJC varies from 115.3°C/W. These values are for PCBs with two and four layer boards with 0.5 oz copper, with two 40

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM3410YMF
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm3410ymf-etched.step / lm3410ymf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm3410ymf.step / lm3410ymf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (57 pp, sha256 0311b7eeee2c8ced, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF