main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm3410xmyx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm3410xmyx: viewers · Ray
lm3410xmyx-etched.fit.json lm3410xmyx: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
lm3410xmyx-etched.glb lm3410xmyx: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
lm3410xmyx-etched.step lm3410xmyx: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
lm3410xmyx-hero.glb lm3410xmyx: hero from the plain model · Ray
lm3410xmyx-hero.overlay.json lm3410xmyx: hero from the plain model · Ray
lm3410xmyx.glb Publish 0.1.0 · Ray
lm3410xmyx.kicad_mod Publish 0.1.0 · Ray
lm3410xmyx.kicad_sym Publish 0.1.0 · Ray
lm3410xmyx.lbr Publish 0.1.0 · Ray
lm3410xmyx.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/lm3410xmyx · Ray

LM3410XMYX

Texas Instruments · LED Drivers · MSOP-8-EP

LM3410XMYX from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connection.
2 PGND power_in Power ground pin; place PGND and output capacitor GND close together.
3 VIN power_in Supply voltage pin for power stage and input supply voltage (operating range 2.7 V to 5.5 V).
4 DIM input Dimming and shutdown control input; logic high enables operation with duty cycle 0% to 100%; do not allow to float or be greater than VIN + 0.3 V.
5 FB input Feedback pin; connect to external resistor to set output current.
6 AGND power_in Signal ground pin; place bottom resistor of feedback network as close as possible to this pin and FB.
7 SW output Output switch connected to inductor and output diode (output voltage range 3 V to 24 V).
8 NC unconnected No connection.
9 DAP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-8-EP
Category LED Drivers
Pins 9

CAD (KiCad official)

  • Symbol: LM3410XMYX
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: lm3410xmyx-etched.step / lm3410xmyx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm3410xmyx.step / lm3410xmyx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (57 pp, sha256 0311b7eeee2c8ced, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF