component
LM3410XMYX
Public Made by Adomby adom
Texas Instruments LED Drivers, MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM3410XMYX
Texas Instruments · LED Drivers · MSOP-8-EP
LM3410XMYX from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection. |
| 2 | PGND | power_in | Power ground pin; place PGND and output capacitor GND close together. |
| 3 | VIN | power_in | Supply voltage pin for power stage and input supply voltage (operating range 2.7 V to 5.5 V). |
| 4 | DIM | input | Dimming and shutdown control input; logic high enables operation with duty cycle 0% to 100%; do not allow to float or be greater than VIN + 0.3 V. |
| 5 | FB | input | Feedback pin; connect to external resistor to set output current. |
| 6 | AGND | power_in | Signal ground pin; place bottom resistor of feedback network as close as possible to this pin and FB. |
| 7 | SW | output | Output switch connected to inductor and output diode (output voltage range 3 V to 24 V). |
| 8 | NC | unconnected | No connection. |
| 9 | DAP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8-EP |
| Category | LED Drivers |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
LM3410XMYX - Footprint:
Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm - 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
lm3410xmyx-etched.step/lm3410xmyx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm3410xmyx.step/lm3410xmyx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (57 pp, sha256
0311b7eeee2c8ced, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).