main
Ray lm3409hvmy: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) d5d80d5
{
  "slug": "lm3409hvmy",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "led drivers",
    "lm3409hvmy",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm3409hvmy.kicad_sym",
    "lm3409hvmy.kicad_mod",
    "lm3409hvmy.glb",
    "lm3409hvmy.step",
    "lm3409hvmy.lbr",
    "docs/hero.png",
    "docs/lm3409hvmy-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "LM3409HVMY",
    "manufacturer": "Texas Instruments",
    "package": "MSOP-10-EP",
    "pin_count": 11,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm3409hv",
    "parts": {
      "symbol": "lm3409hvmy.kicad_sym",
      "footprint": "lm3409hvmy.kicad_mod",
      "model_3d": "lm3409hvmy-etched.glb",
      "model_3d_plain": "lm3409hvmy.glb",
      "model_3d_step": "lm3409hvmy-etched.step",
      "model_3d_step_plain": "lm3409hvmy.step",
      "lbr": "lm3409hvmy.lbr"
    },
    "distributor_links": {
      "lcsc": "C11157"
    },
    "pins": [
      {
        "number": "1",
        "name": "UVLO",
        "type": "input",
        "description": "Input undervoltage lockout with 1.24 V turn-on threshold and 22 µA hysteresis current source; connect to resistor divider from VIN to GND."
      },
      {
        "number": "2",
        "name": "IADJ",
        "type": "input",
        "description": "Analog LED current adjust accepting 0 to 1.24 V input or external resistor to GND to set peak current threshold voltage."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Logic level enable and PWM dimming input requiring >1.74 V to enable, accepting PWM signal to dim, or <0.5 V for shutdown."
      },
      {
        "number": "4",
        "name": "COFF",
        "type": "input",
        "description": "Off-time programming input; connect external resistor from output voltage and capacitor to GND for switching frequency control."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection; connect to system ground with 4 to 6 vias from thermal pad to GND plane."
      },
      {
        "number": "6",
        "name": "PGATE",
        "type": "output",
        "description": "Gate drive output with 2 Ω output resistance sourcing and sinking 50 mA; connect to external P-channel MOSFET gate."
      },
      {
        "number": "7",
        "name": "CSN",
        "type": "input",
        "description": "Negative terminal input for high-side differential current sense; connect to negative side of sense resistor."
      },
      {
        "number": "8",
        "name": "CSP",
        "type": "input",
        "description": "Positive terminal input for high-side differential current sense; connect to positive side of sense resistor and to VIN."
      },
      {
        "number": "9",
        "name": "VCC",
        "type": "power_out",
        "description": "VIN-referenced linear regulator output providing 5.5 to 6.5 V with 30 to 45 mA current limit; bypass with ≥1 µF ceramic capacitor to VIN."
      },
      {
        "number": "10",
        "name": "VIN",
        "type": "power_in",
        "description": "Input voltage with 6 to 75 V operating range for LM3409HV and absolute maximum 76 V; 6 to 42 V for standard LM3409."
      },
      {
        "number": "11",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Thermal pad (DAP) is present in HVSSOP package but not formally numbered in pin configuration table;",
          "exposed pad 11 added from the footprint"
        ],
        "pages_sent": 47,
        "cost_usd": 0.4612,
        "at": "2026-09-24T03:39:31"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm3409hv",
        "pages": 47,
        "sha256": "7745578a43302ee7",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm3409hvmy.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm3409hvmy-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b46e530a82b1cdd7f45994d725bdfb93f0646df9b8c2e05fababf85b748a2608",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}