main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm3409hvmy: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm3409hvmy: viewers · Ray
lm3409hvmy-etched.fit.json lm3409hvmy: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm3409hvmy-etched.glb lm3409hvmy: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm3409hvmy-etched.step lm3409hvmy: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm3409hvmy.glb Publish 0.1.0 · Ray
lm3409hvmy.kicad_mod Publish 0.1.0 · Ray
lm3409hvmy.kicad_sym Publish 0.1.0 · Ray
lm3409hvmy.lbr Publish 0.1.0 · Ray
lm3409hvmy.step Publish 0.1.0 · Ray
package.json lm3409hvmy: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json lm3409hvmy: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/lm3409hvmy · Ray

LM3409HVMY

Texas Instruments · LED Drivers · MSOP-10-EP

LM3409HVMY from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 UVLO input Input undervoltage lockout with 1.24 V turn-on threshold and 22 µA hysteresis current source; connect to resistor divider from VIN to GND.
2 IADJ input Analog LED current adjust accepting 0 to 1.24 V input or external resistor to GND to set peak current threshold voltage.
3 EN input Logic level enable and PWM dimming input requiring >1.74 V to enable, accepting PWM signal to dim, or <0.5 V for shutdown.
4 COFF input Off-time programming input; connect external resistor from output voltage and capacitor to GND for switching frequency control.
5 GND power_in Ground connection; connect to system ground with 4 to 6 vias from thermal pad to GND plane.
6 PGATE output Gate drive output with 2 Ω output resistance sourcing and sinking 50 mA; connect to external P-channel MOSFET gate.
7 CSN input Negative terminal input for high-side differential current sense; connect to negative side of sense resistor.
8 CSP input Positive terminal input for high-side differential current sense; connect to positive side of sense resistor and to VIN.
9 VCC power_out VIN-referenced linear regulator output providing 5.5 to 6.5 V with 30 to 45 mA current limit; bypass with ≥1 µF ceramic capacitor to VIN.
10 VIN power_in Input voltage with 6 to 75 V operating range for LM3409HV and absolute maximum 76 V; 6 to 42 V for standard LM3409.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-10-EP
Category LED Drivers
Pins 11

CAD (KiCad official)

  • Symbol: LM3409HVMY
  • Footprint: Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm
  • 3D model: MSOP-10-EP (KiCad packages3D, STEP)
  • 3D model files: lm3409hvmy-etched.step / lm3409hvmy-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm3409hvmy.step / lm3409hvmy.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 7745578a43302ee7, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF