main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm3406hvmhx: viewers · Ray
lm3406hvmhx-etched.glb Publish 0.1.0 · Ray
lm3406hvmhx-etched.step lm3406hvmhx: factory component page (tier=mfr) · Ray
lm3406hvmhx-hero.glb lm3406hvmhx: hero GLB from the etched model (keeps the MPN mark) · Ray
lm3406hvmhx-hero.overlay.json Publish 0.1.0 · Ray
lm3406hvmhx.glb Publish 0.1.0 · Ray
lm3406hvmhx.kicad_mod Publish 0.1.0 · Ray
lm3406hvmhx.kicad_sym Publish 0.1.0 · Ray
lm3406hvmhx.lbr Publish 0.1.0 · Ray
lm3406hvmhx.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 14 pins · Ray

LM3406HVMHX

Texas Instruments · LED Drivers · TSSOP-14

LM3406HVMHX from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switch pin that connects to the output inductor and Schottky diode; the datasheet gives no voltage limit for this pin alone, with SW to GND rated -1.5V to 45V for LM3406 and -1.5V to 76V for LM3406HV.
2 SW output Switch pin that connects to the output inductor and Schottky diode; it is tied to pin 1 on the package.
3 BOOT passive MOSFET drive bootstrap pin that requires a 22 nF ceramic capacitor connected from this pin to the SW pins.
4 NC unconnected No internal connection; leave this pin unconnected.
5 VOUT input Output voltage sense pin that connects to the output node where the inductor and the first LED anode connect.
6 CS input Current sense feedback pin; the LED current is set by a resistor from this pin to ground.
7 GND power_in Ground pin that connects to system ground.
8 DIM input Input for PWM dimming; logic high turns the output on and logic low turns it off, with DIM to GND rated -0.3V to 7V.
9 COMP passive Error amplifier output that connects to ground through a 0.1 µF ceramic capacitor with X5R or X7R dielectric.
10 RON input On-time control pin; a resistor from this pin to VIN sets the regulator controlled on-time, with RON to GND rated -0.3V to 7V.
11 VCC power_out Output of the internal 7V linear regulator that must be bypassed to ground with a minimum 0.1 µF ceramic capacitor with X5R or X7R dielectric.
12 VINS input Input voltage PWM dimming comparator input that connects to the anode of the input diode to allow dimming by PWM of the input voltage.
13 VIN power_in Input voltage pin with a nominal operating input range of 6V to 75V for the LM3406HV variant.
14 VIN power_in Input voltage pin with a nominal operating input range of 6V to 75V for the LM3406HV variant; it is tied to pin 13 on the package.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-14
Category Nixie Tube Driver/LED Driver
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN to GND -0.3 76 V 3
VINS to GND -0.3 76 V 3
VOUT to GND -0.3 76 V 3
BOOT to GND -0.3 76 V 3
SW to GND -1.5 76 V 3
BOOT to VCC -0.3 76 V 3
BOOT to SW -0.3 14 V 3
VCC to GND -0.3 14 V 3
DIM to GND -0.3 7 V 3
COMP to GND -0.3 7 V 3
CS to GND -0.3 7 V 3
RON to GND -0.3 7 V 3
Junction Temperature 150 °C 3
Storage Temp. Range -65 125 °C 3
ESD Rating 2 kV Human body model 3
Lead Temperature (Soldering, 10sec) 260 °C 3
Infrared/Convection Reflow (15sec) 235 °C 3
VIN Input voltage range (LM3406HV) VIN 6 75 V LM3406HV, LM3406HV-Q1 3
Junction Temperature Range (LM3406, LM3406HV) -40 125 °C LM3406, LM3406HV 3
VREF CS Regulation Threshold VREF 187.5 200 210 mV CS Decreasing, SW turns on 4
VREF CS Regulation Threshold (over operating temperature) VREF 191 210 mV CS Decreasing, SW turns on 4
Shutdown Threshold VSD-TH 0.3 0.7 1.05 V RON Increasing 4
Programmed On-time tON 800 1300 1800 ns VIN = 24V, VO = 12V, RON = 200kΩ 4
VINS Pin Threshold VINS-TH 70 %VIN VINS decreasing 4
VCC Regulated Output VCC-REG 6.4 7 7.4 V 0 mA < ICC < 5 mA 4
VCC Current Limit VCC-LIM 4 20 mA VIN = 24V, VCC = 0V 4
Current Limit Threshold ILIM 1.7 2.1 2.7 A 4
BOOT Under-voltage Lock-out Threshold VDR-UVLO 1.7 2.9 4.3 V BOOT-SW Increasing 4
Buck Switch On Resistance RDS-ON 0.37 0.75 Ω ISW = 200 mA, BOOT = 6.3V 4
Junction to Ambient TSSOP-14 Package θJA 50 °C/W DAP soldered to minimum 2 square inches of 1-oz copper 5
Minimum Off-time tOFF-MIN 230 ns CS = 0V 4
Minimum On-time tON-MIN 280 ns 4
CS Over-voltage Threshold V0V 300 mV CS Increasing, SW turns off 4
CS Bias Current ICS 0.9 µA CS = 0V 4
VOUT Bias Current IVOUT 83 µA VOUT = 24V 4
COMP Pin Current ICOMP 25 µA CS = 0V 4
Error Amplifier Transconductance Gm-CS 145 µS 150 mV < CS < 250 mV 4
Shutdown Hysteresis VSD-HYS 40 mV RON Decreasing 4
VINS Pin Input Current IIN-2WD 25 µA VINS = 24V * 0.7 4
VCC Bypass Threshold VCC-BP-TH 8.8 V VIN Increasing 4
VCC Under-voltage Lock-out Threshold VCC-UV-TH 5.3 V VCC Increasing 4
VCC Under-voltage Lock-out Hysteresis VCC-UV-HYS 150 mV VCC Decreasing 4
IIN Operating Current IIN-OP 1.2 mA Non-switching, CS = 0.5V 4
IIN Shutdown Current IIN-SD 240 350 µA RON = 0V 4
Logic High (DIM) VIH 2.2 V DIM Increasing 4
Logic Low (DIM) VIL 0.8 V DIM Decreasing 4
DIM Pull-up Current IDIM-PU 80 µA DIM = 1.5V 4
BOOT Under-voltage Lock-out Hysteresis VDR-HYS 370 mV BOOT-SW Decreasing 4
Thermal Shutdown Threshold TSD 165 °C 4
Thermal Shutdown Hysteresis TSD-HYS 25 °C 4

CAD (KiCad official)

  • Symbol: LM3406HVMHX
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: lm3406hvmhx-etched.step / lm3406hvmhx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm3406hvmhx.step / lm3406hvmhx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 701e308df9f549cb, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF