main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm3405axmyx: viewers · Ray
lm3405axmyx-etched.glb Publish 0.1.0 · Ray
lm3405axmyx-etched.step lm3405axmyx: factory component page (tier=mfr) · Ray
lm3405axmyx-hero.glb lm3405axmyx: hero GLB from the etched model (keeps the MPN mark) · Ray
lm3405axmyx-hero.overlay.json Publish 0.1.0 · Ray
lm3405axmyx.glb Publish 0.1.0 · Ray
lm3405axmyx.kicad_mod Publish 0.1.0 · Ray
lm3405axmyx.kicad_sym Publish 0.1.0 · Ray
lm3405axmyx.lbr Publish 0.1.0 · Ray
lm3405axmyx.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 9 pins · Ray

LM3405AXMYX

Texas Instruments · LED Drivers · MSOP-8-EP

LM3405AXMYX from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Feedback pin. Connect FB to the LED string cathode and an external resistor to ground to set the LED current.
2 GND power_in Signal and power ground pin. Place the bottom resistor of the feedback network as close as possible to this pin.
3 NC unconnected No connection.
4 BOOST output Boost voltage that drives the NMOS output switch. A bootstrap capacitor is connected between the BOOST and SW pins.
5 SW output Switch pin. Connect this pin to the inductor, catch diode, and bootstrap capacitor.
6 VIN power_in Input supply voltage. Connect a bypass capacitor locally from this pin to GND.
7 GND power_in Signal and power ground pin. Place the bottom resistor of the feedback network as close as possible to this pin.
8 EN/DIM input Enable control input. Logic high enables operation. Do not allow this pin to float or be greater than VIN + 0.3 V.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-8-EP
Category LED Drivers
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN input voltage VIN -0.5 24 V 4
SW voltage -0.5 24 V 4
Boost voltage -0.5 30 V 4
Boost to SW voltage -0.5 6 V 4
FB voltage -0.5 3 V 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Feedback voltage VFB 0.188 0.205 0.22 V 5
Feedback input bias current IFB 10 250 nA Sink/source 5
Undervoltage lockout rising UVLO 2.74 2.95 V VIN Rising 5
Undervoltage lockout falling UVLO 1.9 2.3 V VIN Falling 5
Switching frequency fSW 1.2 1.6 1.9 MHz 5
Maximum duty cycle DMAX 85 94 % VFB = 0 V 5
Switch ON resistance MSOP-PowerPAD RDS(ON) 360 700 mΩ VBOOST - VSW = 3 V 5
Switch current limit ICL 1.2 2 2.8 A VBOOST - VSW = 3 V, VIN = 3 V 5
Quiescent current (switching) IQ 1.8 2.8 mA Switching, VFB = 0.195 V 5
VIN operating range VIN 3 22 V 4
Boost to SW voltage operating range 2.5 5.5 V 4
Junction temperature operating range TJ -40 125 °C 4
LED current ILED 1 A MSOP-PowerPAD package 4
Junction-to-ambient thermal resistance RθJA 55.3 °C/W DGN (MSOP-PowerPAD) 8 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 62.8 °C/W DGN (MSOP-PowerPAD) 8 pins 5
Junction-to-board thermal resistance RθJB 38.9 °C/W DGN (MSOP-PowerPAD) 8 pins 5
Junction-to-top characterization parameter ψJT 8.2 °C/W DGN (MSOP-PowerPAD) 8 pins 5
Junction-to-board characterization parameter ψJB 38.6 °C/W DGN (MSOP-PowerPAD) 8 pins 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 8 °C/W DGN (MSOP-PowerPAD) 8 pins 5

CAD (KiCad official)

  • Symbol: LM3405AXMYX
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: lm3405axmyx-etched.step / lm3405axmyx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm3405axmyx.step / lm3405axmyx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 6ffca81b353b1a67, retrieved 2026-11-06, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF