Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM311PWR

Texas Instruments · Comparators · TSSOP-8 (PW)

LM311PWR from Texas Instruments, in a TSSOP-8 (PW). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 EMIT OUT output Output emitter capable of driving loads referenced to ground or supply rails, rated for maximum 30V from emitter to VCC-.
2 IN+ input Noninverting input of the differential comparator accepting input voltages between VCC- + 0.5V and VCC+ - 1.5V.
3 IN- input Inverting input of the differential comparator accepting input voltages between VCC- + 0.5V and VCC+ - 1.5V.
4 VCC- power_in Negative supply voltage rail with minimum rating of -18V.
5 BALANCE input Offset voltage balance adjustment input.
6 BAL/STRB input Strobe input that drives the output to the off state when pulled low.
7 COL OUT output Output collector capable of driving loads referenced to ground or supply rails, rated for maximum 40V from collector to VCC-.
8 VCC+ power_in Positive supply voltage rail with maximum rating of +18V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-8 (PW)
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (VCC+ − VCC−) VCC+ − VCC− 3.5 30 V 4
Operating free-air temperature range (LM311) TA 0 70 °C LM311 4
Supply voltage VCC+ VCC+ 18 V Referenced to midpoint of VCC+ and VCC− 4
Supply voltage VCC− VCC− -18 V Referenced to midpoint of VCC+ and VCC− 4
Supply voltage VCC+ − VCC− VCC+ − VCC− 36 V 4
Differential input voltage VID -30 30 V IN+ with respect to IN− 4
Input voltage (either input) VI -15 15 V Magnitude must not exceed supply voltage or ±15 V, whichever is less 4
Voltage from emitter output to VCC− 30 V 4
Voltage from collector output to VCC− (LM311) 40 V LM311 4
Duration of output short circuit to ground 10 s To ground 4
Operating virtual-junction temperature TJ 150 °C 4
Lead temperature (D, P, PS, or PW package) 260 °C 1,6 mm (1/16 inch) from case, 60 s 4
Storage temperature Tstg -65 150 °C 4
Input offset voltage VIO 2 7.5 mV See (3), 25°C 6
Input offset voltage VIO 10 mV See (3), Full range 6
Input offset current IIO 6 50 nA See (3), 25°C 6
Input offset current IIO 70 nA See (3), Full range 6
Input bias current IIB 100 250 nA 1 V ≤ VO ≤ 14 V, 25°C 6
Input bias current IIB 300 nA 1 V ≤ VO ≤ 14 V, Full range 6
Low-level strobe current IIL(S) -3 mA V(strobe) = 0.3 V, VID ≤ −10 mV, 25°C 6
Common-mode input-voltage range, lower range VICR -14.7 -14.5 V Lower range, Full range 6
Common-mode input-voltage range, upper range VICR 13 13.8 V Upper range, Full range 6
Large-signal differential-voltage amplification AVD 40 200 V/mV 5 V ≤ VO ≤ 35 V, RL = 1 kΩ, 25°C 6
High-level (collector) output leakage current IOH 0.2 10 nA I(strobe) = −3 mA, VID = 5 mV, VOH = 35 V, 25°C 6
High-level (collector) output leakage current IOH 0.5 μA I(strobe) = −3 mA, VID = 5 mV, VOH = 35 V, Full range 6
High-level (collector) output leakage current IOH 0.2 50 nA VID = 5 mV, VOH = 35 V, 25°C 6
Low-level (collector-to-emitter) output voltage VOL 0.75 1.5 V IOL = 50 mA, VID = −5 mV, 25°C 6
Low-level (collector-to-emitter) output voltage VOL 0.23 0.4 V VCC+ = 4.5 V, VCC− = 0 V, IOL = 8 mA, VID = −6 mV, Full range 6
Supply current from VCC+ (output low) ICC+ 5.1 7.5 mA VID = −10 mV, No load, 25°C 6
Supply current from VCC− (output high) ICC− -4.1 -5 mA VID = 10 mV, No load, 25°C 6
Junction-to-ambient thermal resistance (PW TSSOP) RθJA 162 °C/W 5
Junction-to-case (top) thermal resistance (PW TSSOP) RθJC(top) 44.6 °C/W 5
Junction-to-board thermal resistance (PW TSSOP) RθJB 93 °C/W 5
Junction-to-top characterization parameter (PW TSSOP) ψJT 2.6 °C/W 5
Junction-to-board characterization parameter (PW TSSOP) ψJB 90.8 °C/W 5

CAD (Adom-generated)

  • Symbol: LM311PWR
  • Footprint: Adom_Gen:Texas_Instruments_PW0008A
  • 3D model: generated to fit the land (STEP)
  • 3D model files: lm311pwr-etched.step / lm311pwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm311pwr.step / lm311pwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 1877bb45737cb7e8, retrieved 2026-11-21)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: PW0008A 4221848/A land pattern, SLCS007K p.40: 1.5 x 0.45 mm pads, pitch 0.65 mm, pad rows 5.8 mm centre-to-centre. Body from the outline p.39: 3.1/2.9 x 4.5/4.3 body, 6.6/6.2 across the leads, 1.2 MAX, 0.15/0.05 standoff, 8X 0.30/0.19 leads, 6X 0.65 pitch. Shared land Adom_Gen:Texas_Instruments_PW0008A (TI PW0008A EXAMPLE BOARD LAYOUT 4221848/A, ADS1202 SBAS275B p.24). Task master ruling 2026-11-21: TSSOP/SSOP on the lands drawn and sampled (FAMWAVES samples + renders approved).

Datasheet PDF