Generated by kicad-footprint-generator · KiCad file format 20260206
LM311PSR
Texas Instruments · Comparators · SO-8
LM311PSR from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EMIT OUT | output | Open-drain output emitter from NPN output transistor stage, isolated from VCC-, with maximum voltage rating of 30 V from emitter to VCC-. |
| 2 | IN+ | input | Noninverting input of comparator with common-mode input voltage range of −14.7 to 13.8 V and maximum differential input voltage of ±30 V. |
| 3 | IN- | input | Inverting input of comparator with common-mode input voltage range of −14.7 to 13.8 V and maximum differential input voltage of ±30 V. |
| 4 | VCC- | power_in | Negative power supply pin with minimum rating of −18 V and maximum differential supply voltage (VCC+ − VCC−) of 36 V. |
| 5 | BALANCE | input | Offset balance input pin for external offset voltage adjustment or trimming via connection to potentiometer or resistor network. |
| 6 | BAL/STRB | input | Strobe control input pin; must be current driven at −3 to −5 mA; pulling low disables output regardless of input state. |
| 7 | COL OUT | output | Open-drain output collector from NPN output transistor stage with maximum voltage rating of 40 V from collector to VCC- for LM311. |
| 8 | VCC+ | power_in | Positive power supply pin with maximum rating of +18 V and maximum differential supply voltage (VCC+ − VCC−) of 36 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 2 | 7.5 | mV | See note (3); 25°C | 6 | |
| Input offset voltage (full range) | VIO | 10 | mV | See note (3); Full range | 6 | ||
| Input offset current | IIO | 6 | 50 | nA | See note (3); 25°C | 6 | |
| Input offset current (full range) | IIO | 70 | nA | See note (3); Full range | 6 | ||
| Input bias current | IIB | 100 | 250 | nA | 1 V ≤ VO ≤ 14 V; 25°C | 6 | |
| Input bias current (full range) | IIB | 300 | nA | 1 V ≤ VO ≤ 14 V; Full range | 6 | ||
| Common-mode input-voltage range, lower range | VICR | -14.7 | -14.5 | V | Lower range; Full range | 6 | |
| Common-mode input-voltage range, upper range | VICR | 13 | 13.8 | V | Upper range | 6 | |
| Large-signal differential-voltage amplification | AVD | 40 | 200 | V/mV | 5 V ≤ VO ≤ 35 V, RL = 1 kΩ; 25°C | 6 | |
| Low-level (collector-to-emitter) output voltage | VOL | 0.75 | 1.5 | V | IOL = 50 mA, VID = –5 mV; 25°C | 6 | |
| Low-level (collector-to-emitter) output voltage | VOL | 0.23 | 0.4 | V | VCC+ = 4.5 V, VCC– = 0 V, IOL = 8 mA, VID = –6 mV; Full range | 6 | |
| Supply current from VCC+, output low | ICC+ | 5.1 | 7.5 | mA | VID = –10 mV, No load; 25°C | 6 | |
| Supply current from VCC–, output high | ICC– | -4.1 | -5 | mA | VID = 10 mV, No load; 25°C | 6 | |
| Supply voltage (VCC+ – VCC–) | VCC+ – VCC– | 3.5 | 30 | V | 4 | ||
| Operating free-air temperature range (LM311) | TA | 0 | 70 | °C | LM311 | 4 | |
| Supply voltage VCC+ | VCC+ | 18 | V | Voltages referenced to midpoint of VCC+ and VCC– | 4 | ||
| Supply voltage VCC– | VCC– | -18 | V | Voltages referenced to midpoint of VCC+ and VCC– | 4 | ||
| Supply voltage VCC+ – VCC– | VCC+ – VCC– | 36 | V | 4 | |||
| Differential input voltage | VID | -30 | 30 | V | Differential voltages at IN+ with respect to IN– | 4 | |
| Input voltage (either input) | VI | -15 | 15 | V | Magnitude must not exceed supply magnitude or ±15 V, whichever is less | 4 | |
| Voltage from emitter output to VCC– | 30 | V | 4 | ||||
| Voltage from collector output to VCC– (LM311) | 40 | V | LM311 | 4 | |||
| Duration of output short circuit to ground | 10 | s | Output short circuit to ground | 4 | |||
| Operating virtual-junction temperature | TJ | 150 | °C | 4 | |||
| Lead temperature | 260 | °C | 1,6 mm (1/16 inch) from case, 60 s; D, P, PS, or PW package | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic discharge, human body model (HBM) | V(ESD) | -500 | 500 | V | Per ANSI/ESDA/JEDEC JS-001 | 4 | |
| Electrostatic discharge, charged-device model (CDM) | V(ESD) | -750 | 750 | V | Per JEDEC JESD22-C101 | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 121.8 | °C/W | PS (SO) 8-pin package | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 81.6 | °C/W | PS (SO) 8-pin package | 5 | ||
| Junction-to-board thermal resistance | RθJB | 66.5 | °C/W | PS (SO) 8-pin package | 5 | ||
| Junction-to-top characterization parameter | ψJT | 31.4 | °C/W | PS (SO) 8-pin package | 5 | ||
| Junction-to-board characterization parameter | ψJB | 65.8 | °C/W | PS (SO) 8-pin package | 5 |
CAD (KiCad official)
- Symbol:
LM311PSR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lm311psr-etched.step/lm311psr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm311psr.step/lm311psr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
1877bb45737cb7e8, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).