Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM311PSR

Texas Instruments · Comparators · SO-8

LM311PSR from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EMIT OUT output Open-drain output emitter from NPN output transistor stage, isolated from VCC-, with maximum voltage rating of 30 V from emitter to VCC-.
2 IN+ input Noninverting input of comparator with common-mode input voltage range of −14.7 to 13.8 V and maximum differential input voltage of ±30 V.
3 IN- input Inverting input of comparator with common-mode input voltage range of −14.7 to 13.8 V and maximum differential input voltage of ±30 V.
4 VCC- power_in Negative power supply pin with minimum rating of −18 V and maximum differential supply voltage (VCC+ − VCC−) of 36 V.
5 BALANCE input Offset balance input pin for external offset voltage adjustment or trimming via connection to potentiometer or resistor network.
6 BAL/STRB input Strobe control input pin; must be current driven at −3 to −5 mA; pulling low disables output regardless of input state.
7 COL OUT output Open-drain output collector from NPN output transistor stage with maximum voltage rating of 40 V from collector to VCC- for LM311.
8 VCC+ power_in Positive power supply pin with maximum rating of +18 V and maximum differential supply voltage (VCC+ − VCC−) of 36 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SO-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VIO 2 7.5 mV See note (3); 25°C 6
Input offset voltage (full range) VIO 10 mV See note (3); Full range 6
Input offset current IIO 6 50 nA See note (3); 25°C 6
Input offset current (full range) IIO 70 nA See note (3); Full range 6
Input bias current IIB 100 250 nA 1 V ≤ VO ≤ 14 V; 25°C 6
Input bias current (full range) IIB 300 nA 1 V ≤ VO ≤ 14 V; Full range 6
Common-mode input-voltage range, lower range VICR -14.7 -14.5 V Lower range; Full range 6
Common-mode input-voltage range, upper range VICR 13 13.8 V Upper range 6
Large-signal differential-voltage amplification AVD 40 200 V/mV 5 V ≤ VO ≤ 35 V, RL = 1 kΩ; 25°C 6
Low-level (collector-to-emitter) output voltage VOL 0.75 1.5 V IOL = 50 mA, VID = –5 mV; 25°C 6
Low-level (collector-to-emitter) output voltage VOL 0.23 0.4 V VCC+ = 4.5 V, VCC– = 0 V, IOL = 8 mA, VID = –6 mV; Full range 6
Supply current from VCC+, output low ICC+ 5.1 7.5 mA VID = –10 mV, No load; 25°C 6
Supply current from VCC–, output high ICC– -4.1 -5 mA VID = 10 mV, No load; 25°C 6
Supply voltage (VCC+ – VCC–) VCC+ – VCC– 3.5 30 V 4
Operating free-air temperature range (LM311) TA 0 70 °C LM311 4
Supply voltage VCC+ VCC+ 18 V Voltages referenced to midpoint of VCC+ and VCC– 4
Supply voltage VCC– VCC– -18 V Voltages referenced to midpoint of VCC+ and VCC– 4
Supply voltage VCC+ – VCC– VCC+ – VCC– 36 V 4
Differential input voltage VID -30 30 V Differential voltages at IN+ with respect to IN– 4
Input voltage (either input) VI -15 15 V Magnitude must not exceed supply magnitude or ±15 V, whichever is less 4
Voltage from emitter output to VCC– 30 V 4
Voltage from collector output to VCC– (LM311) 40 V LM311 4
Duration of output short circuit to ground 10 s Output short circuit to ground 4
Operating virtual-junction temperature TJ 150 °C 4
Lead temperature 260 °C 1,6 mm (1/16 inch) from case, 60 s; D, P, PS, or PW package 4
Storage temperature Tstg -65 150 °C 4
Electrostatic discharge, human body model (HBM) V(ESD) -500 500 V Per ANSI/ESDA/JEDEC JS-001 4
Electrostatic discharge, charged-device model (CDM) V(ESD) -750 750 V Per JEDEC JESD22-C101 4
Junction-to-ambient thermal resistance RθJA 121.8 °C/W PS (SO) 8-pin package 5
Junction-to-case (top) thermal resistance RθJC(top) 81.6 °C/W PS (SO) 8-pin package 5
Junction-to-board thermal resistance RθJB 66.5 °C/W PS (SO) 8-pin package 5
Junction-to-top characterization parameter ψJT 31.4 °C/W PS (SO) 8-pin package 5
Junction-to-board characterization parameter ψJB 65.8 °C/W PS (SO) 8-pin package 5

CAD (KiCad official)

  • Symbol: LM311PSR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lm311psr-etched.step / lm311psr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm311psr.step / lm311psr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 1877bb45737cb7e8, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF