main
Ray
lm311p: specified limits as data (metadata.characteristics, 35 rows from the datasheet)
feb10bc
LM311P
Texas Instruments · Comparators · PDIP-8
LM311P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EMIT OUT | tri_state | Open-emitter comparator output that sinks current when low and presents high impedance when high; maximum voltage 30V from VCC−. |
| 2 | IN+ | input | Noninverting comparator input with operating voltage range VCC− + 0.5V to VCC+ − 1.5V. |
| 3 | IN− | input | Inverting comparator input with operating voltage range VCC− + 0.5V to VCC+ − 1.5V. |
| 4 | VCC− | power_in | Negative power supply connection; serves as ground reference for single-supply operation or negative rail for dual-supply operation. |
| 5 | BALANCE | input | Offset voltage balance adjustment input pin; leave unconnected or short to adjacent pin if offset balancing not used. |
| 6 | BAL/STRB | input | Strobe control input for output enable; must be current-driven at −3 to −5 mA to enable output (do not connect directly to ground). |
| 7 | COL OUT | tri_state | Open-collector comparator output that sinks current when low and presents high impedance when high; maximum voltage 40V for LM311. |
| 8 | VCC+ | power_in | Positive power supply connection; recommended operating supply range 3.5V to 30V span (VCC+ − VCC−). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 2 | 7.5 | mV | TA = 25°C; see note (3) | 6 | |
| Input offset voltage | VIO | 10 | mV | Full range; see note (3) | 6 | ||
| Input offset current | IIO | 6 | 50 | nA | TA = 25°C; see note (3) | 6 | |
| Input offset current | IIO | 70 | nA | Full range; see note (3) | 6 | ||
| Input bias current | IIB | 100 | 250 | nA | 1 V ≤ VO ≤ 14 V, TA = 25°C | 6 | |
| Input bias current | IIB | 300 | nA | 1 V ≤ VO ≤ 14 V, full range | 6 | ||
| Common-mode input-voltage range, lower range | VICR | -14.7 | V | Lower range, TA = 25°C (temperature assignment to be confirmed) | 6 | ||
| Common-mode input-voltage range, lower range | VICR | -14.5 | V | Lower range, full range TA | 6 | ||
| Common-mode input-voltage range, upper range | VICR | 13 | 13.8 | V | Upper range | 6 | |
| Large-signal differential-voltage amplification | AVD | 40 | 200 | V/mV | 5 V ≤ VO ≤ 35 V, RL = 1 kΩ, TA = 25°C | 6 | |
| High-level (collector) output leakage current | IOH | 0.2 | 10 | nA | I(strobe) = −3 mA, VID = 5 mV, VOH = 35 V, TA = 25°C | 6 | |
| High-level (collector) output leakage current | IOH | 0.5 | μA | I(strobe) = −3 mA, VID = 5 mV, VOH = 35 V, full range | 6 | ||
| High-level (collector) output leakage current | IOH | 0.2 | 50 | nA | VID = 5 mV, VOH = 35 V, TA = 25°C | 6 | |
| Low-level (collector-to-emitter) output voltage | VOL | 0.75 | 1.5 | V | IOL = 50 mA, VID = −5 mV, TA = 25°C | 6 | |
| Low-level (collector-to-emitter) output voltage | VOL | 0.23 | 0.4 | V | VCC+ = 4.5 V, VCC− = 0 V, IOL = 8 mA, VID = −6 mV, full range | 6 | |
| Supply current from VCC+, output low | ICC+ | 5.1 | 7.5 | mA | VID = −10 mV, no load, TA = 25°C | 6 | |
| Supply current from VCC−, output high | ICC− | -4.1 | -5 | mA | VID = 10 mV, no load, TA = 25°C | 6 | |
| Supply voltage VCC+ max | VCC+ | 18 | V | Absolute maximum, referenced to midpoint of VCC+ and VCC− | 4 | ||
| Supply voltage VCC− min | VCC− | -18 | V | Absolute maximum, referenced to midpoint of VCC+ and VCC− | 4 | ||
| Supply voltage VCC+ − VCC− | VCC+ − VCC− | 36 | V | Absolute maximum | 4 | ||
| Differential input voltage | VID | -30 | 30 | V | Differential voltage at IN+ with respect to IN− | 4 | |
| Input voltage (either input) | VI | -15 | 15 | V | Must not exceed supply magnitude or ±15 V, whichever is less | 4 | |
| Voltage from emitter output to VCC− | 30 | V | Absolute maximum | 4 | |||
| Voltage from collector output to VCC− (LM311) | 40 | V | LM311 column | 4 | |||
| Duration of output short circuit to ground | 10 | s | Output short circuit to ground | 4 | |||
| Operating virtual-junction temperature | TJ | 150 | °C | 4 | |||
| Lead temperature (D, P, PS, or PW package) | 260 | °C | 1,6 mm (1/16 inch) from case, 60 s | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage VCC+ − VCC− | VCC+ − VCC− | 3.5 | 30 | V | 4 | ||
| Operating free-air temperature range (LM311) | TA | 0 | 70 | °C | LM311 | 4 | |
| Junction-to-ambient thermal resistance (PDIP, P) | RθJA | 57.5 | °C/W | P (PDIP) 8-pin package | 5 | ||
| Junction-to-case (top) thermal resistance (PDIP, P) | RθJC(top) | 47.3 | °C/W | P (PDIP) 8-pin package | 5 | ||
| Junction-to-board thermal resistance (PDIP, P) | RθJB | 34.6 | °C/W | P (PDIP) 8-pin package | 5 | ||
| Junction-to-top characterization parameter (PDIP, P) | ψJT | 24.9 | °C/W | P (PDIP) 8-pin package | 5 | ||
| Junction-to-board characterization parameter (PDIP, P) | ψJB | 34.5 | °C/W | P (PDIP) 8-pin package | 5 |
CAD (KiCad official)
- Symbol:
LM311P - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
lm311p-etched.step/lm311p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm311p.step/lm311p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
1877bb45737cb7e8, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM311P
**Texas Instruments** · Comparators · PDIP-8
LM311P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EMIT OUT | tri_state | Open-emitter comparator output that sinks current when low and presents high impedance when high; maximum voltage 30V from VCC−. |
| 2 | IN+ | input | Noninverting comparator input with operating voltage range VCC− + 0.5V to VCC+ − 1.5V. |
| 3 | IN− | input | Inverting comparator input with operating voltage range VCC− + 0.5V to VCC+ − 1.5V. |
| 4 | VCC− | power_in | Negative power supply connection; serves as ground reference for single-supply operation or negative rail for dual-supply operation. |
| 5 | BALANCE | input | Offset voltage balance adjustment input pin; leave unconnected or short to adjacent pin if offset balancing not used. |
| 6 | BAL/STRB | input | Strobe control input for output enable; must be current-driven at −3 to −5 mA to enable output (do not connect directly to ground). |
| 7 | COL OUT | tri_state | Open-collector comparator output that sinks current when low and presents high impedance when high; maximum voltage 40V for LM311. |
| 8 | VCC+ | power_in | Positive power supply connection; recommended operating supply range 3.5V to 30V span (VCC+ − VCC−). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | | 2 | 7.5 | mV | TA = 25°C; see note (3) | 6 |
| Input offset voltage | VIO | | | 10 | mV | Full range; see note (3) | 6 |
| Input offset current | IIO | | 6 | 50 | nA | TA = 25°C; see note (3) | 6 |
| Input offset current | IIO | | | 70 | nA | Full range; see note (3) | 6 |
| Input bias current | IIB | | 100 | 250 | nA | 1 V ≤ VO ≤ 14 V, TA = 25°C | 6 |
| Input bias current | IIB | | | 300 | nA | 1 V ≤ VO ≤ 14 V, full range | 6 |
| Common-mode input-voltage range, lower range | VICR | -14.7 | | | V | Lower range, TA = 25°C (temperature assignment to be confirmed) | 6 |
| Common-mode input-voltage range, lower range | VICR | -14.5 | | | V | Lower range, full range TA | 6 |
| Common-mode input-voltage range, upper range | VICR | 13 | 13.8 | | V | Upper range | 6 |
| Large-signal differential-voltage amplification | AVD | 40 | 200 | | V/mV | 5 V ≤ VO ≤ 35 V, RL = 1 kΩ, TA = 25°C | 6 |
| High-level (collector) output leakage current | IOH | | 0.2 | 10 | nA | I(strobe) = −3 mA, VID = 5 mV, VOH = 35 V, TA = 25°C | 6 |
| High-level (collector) output leakage current | IOH | | | 0.5 | μA | I(strobe) = −3 mA, VID = 5 mV, VOH = 35 V, full range | 6 |
| High-level (collector) output leakage current | IOH | | 0.2 | 50 | nA | VID = 5 mV, VOH = 35 V, TA = 25°C | 6 |
| Low-level (collector-to-emitter) output voltage | VOL | | 0.75 | 1.5 | V | IOL = 50 mA, VID = −5 mV, TA = 25°C | 6 |
| Low-level (collector-to-emitter) output voltage | VOL | | 0.23 | 0.4 | V | VCC+ = 4.5 V, VCC− = 0 V, IOL = 8 mA, VID = −6 mV, full range | 6 |
| Supply current from VCC+, output low | ICC+ | | 5.1 | 7.5 | mA | VID = −10 mV, no load, TA = 25°C | 6 |
| Supply current from VCC−, output high | ICC− | | -4.1 | -5 | mA | VID = 10 mV, no load, TA = 25°C | 6 |
| Supply voltage VCC+ max | VCC+ | | | 18 | V | Absolute maximum, referenced to midpoint of VCC+ and VCC− | 4 |
| Supply voltage VCC− min | VCC− | -18 | | | V | Absolute maximum, referenced to midpoint of VCC+ and VCC− | 4 |
| Supply voltage VCC+ − VCC− | VCC+ − VCC− | | | 36 | V | Absolute maximum | 4 |
| Differential input voltage | VID | -30 | | 30 | V | Differential voltage at IN+ with respect to IN− | 4 |
| Input voltage (either input) | VI | -15 | | 15 | V | Must not exceed supply magnitude or ±15 V, whichever is less | 4 |
| Voltage from emitter output to VCC− | | | | 30 | V | Absolute maximum | 4 |
| Voltage from collector output to VCC− (LM311) | | | | 40 | V | LM311 column | 4 |
| Duration of output short circuit to ground | | | | 10 | s | Output short circuit to ground | 4 |
| Operating virtual-junction temperature | TJ | | | 150 | °C | | 4 |
| Lead temperature (D, P, PS, or PW package) | | | | 260 | °C | 1,6 mm (1/16 inch) from case, 60 s | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Supply voltage VCC+ − VCC− | VCC+ − VCC− | 3.5 | | 30 | V | | 4 |
| Operating free-air temperature range (LM311) | TA | 0 | | 70 | °C | LM311 | 4 |
| Junction-to-ambient thermal resistance (PDIP, P) | RθJA | | 57.5 | | °C/W | P (PDIP) 8-pin package | 5 |
| Junction-to-case (top) thermal resistance (PDIP, P) | RθJC(top) | | 47.3 | | °C/W | P (PDIP) 8-pin package | 5 |
| Junction-to-board thermal resistance (PDIP, P) | RθJB | | 34.6 | | °C/W | P (PDIP) 8-pin package | 5 |
| Junction-to-top characterization parameter (PDIP, P) | ψJT | | 24.9 | | °C/W | P (PDIP) 8-pin package | 5 |
| Junction-to-board characterization parameter (PDIP, P) | ψJB | | 34.5 | | °C/W | P (PDIP) 8-pin package | 5 |
## CAD (KiCad official)
- Symbol: `LM311P`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files: `lm311p-etched.step` / `lm311p-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm311p.step` / `lm311p.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm311) (42 pp, sha256 `1877bb45737cb7e8`, retrieved 2026-09-24, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm311p-datasheet.pdf)