main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm311p: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm311p: viewers · Ray
lm311p-etched.fit.json lm311p: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
lm311p-etched.glb lm311p: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
lm311p-etched.step lm311p: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
lm311p-hero.glb lm311p: hero from the plain model · Ray
lm311p-hero.overlay.json lm311p: hero from the plain model · Ray
lm311p.glb Publish 0.1.0 · Ray
lm311p.kicad_mod Publish 0.1.0 · Ray
lm311p.kicad_sym Publish 0.1.0 · Ray
lm311p.lbr Publish 0.1.0 · Ray
lm311p.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md lm311p: specified limits as data (metadata.characteristics, 35 rows from the datasheet) · Ray

LM311P

Texas Instruments · Comparators · PDIP-8

LM311P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EMIT OUT tri_state Open-emitter comparator output that sinks current when low and presents high impedance when high; maximum voltage 30V from VCC−.
2 IN+ input Noninverting comparator input with operating voltage range VCC− + 0.5V to VCC+ − 1.5V.
3 IN− input Inverting comparator input with operating voltage range VCC− + 0.5V to VCC+ − 1.5V.
4 VCC− power_in Negative power supply connection; serves as ground reference for single-supply operation or negative rail for dual-supply operation.
5 BALANCE input Offset voltage balance adjustment input pin; leave unconnected or short to adjacent pin if offset balancing not used.
6 BAL/STRB input Strobe control input for output enable; must be current-driven at −3 to −5 mA to enable output (do not connect directly to ground).
7 COL OUT tri_state Open-collector comparator output that sinks current when low and presents high impedance when high; maximum voltage 40V for LM311.
8 VCC+ power_in Positive power supply connection; recommended operating supply range 3.5V to 30V span (VCC+ − VCC−).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VIO 2 7.5 mV TA = 25°C; see note (3) 6
Input offset voltage VIO 10 mV Full range; see note (3) 6
Input offset current IIO 6 50 nA TA = 25°C; see note (3) 6
Input offset current IIO 70 nA Full range; see note (3) 6
Input bias current IIB 100 250 nA 1 V ≤ VO ≤ 14 V, TA = 25°C 6
Input bias current IIB 300 nA 1 V ≤ VO ≤ 14 V, full range 6
Common-mode input-voltage range, lower range VICR -14.7 V Lower range, TA = 25°C (temperature assignment to be confirmed) 6
Common-mode input-voltage range, lower range VICR -14.5 V Lower range, full range TA 6
Common-mode input-voltage range, upper range VICR 13 13.8 V Upper range 6
Large-signal differential-voltage amplification AVD 40 200 V/mV 5 V ≤ VO ≤ 35 V, RL = 1 kΩ, TA = 25°C 6
High-level (collector) output leakage current IOH 0.2 10 nA I(strobe) = −3 mA, VID = 5 mV, VOH = 35 V, TA = 25°C 6
High-level (collector) output leakage current IOH 0.5 μA I(strobe) = −3 mA, VID = 5 mV, VOH = 35 V, full range 6
High-level (collector) output leakage current IOH 0.2 50 nA VID = 5 mV, VOH = 35 V, TA = 25°C 6
Low-level (collector-to-emitter) output voltage VOL 0.75 1.5 V IOL = 50 mA, VID = −5 mV, TA = 25°C 6
Low-level (collector-to-emitter) output voltage VOL 0.23 0.4 V VCC+ = 4.5 V, VCC− = 0 V, IOL = 8 mA, VID = −6 mV, full range 6
Supply current from VCC+, output low ICC+ 5.1 7.5 mA VID = −10 mV, no load, TA = 25°C 6
Supply current from VCC−, output high ICC− -4.1 -5 mA VID = 10 mV, no load, TA = 25°C 6
Supply voltage VCC+ max VCC+ 18 V Absolute maximum, referenced to midpoint of VCC+ and VCC− 4
Supply voltage VCC− min VCC− -18 V Absolute maximum, referenced to midpoint of VCC+ and VCC− 4
Supply voltage VCC+ − VCC− VCC+ − VCC− 36 V Absolute maximum 4
Differential input voltage VID -30 30 V Differential voltage at IN+ with respect to IN− 4
Input voltage (either input) VI -15 15 V Must not exceed supply magnitude or ±15 V, whichever is less 4
Voltage from emitter output to VCC− 30 V Absolute maximum 4
Voltage from collector output to VCC− (LM311) 40 V LM311 column 4
Duration of output short circuit to ground 10 s Output short circuit to ground 4
Operating virtual-junction temperature TJ 150 °C 4
Lead temperature (D, P, PS, or PW package) 260 °C 1,6 mm (1/16 inch) from case, 60 s 4
Storage temperature Tstg -65 150 °C 4
Supply voltage VCC+ − VCC− VCC+ − VCC− 3.5 30 V 4
Operating free-air temperature range (LM311) TA 0 70 °C LM311 4
Junction-to-ambient thermal resistance (PDIP, P) RθJA 57.5 °C/W P (PDIP) 8-pin package 5
Junction-to-case (top) thermal resistance (PDIP, P) RθJC(top) 47.3 °C/W P (PDIP) 8-pin package 5
Junction-to-board thermal resistance (PDIP, P) RθJB 34.6 °C/W P (PDIP) 8-pin package 5
Junction-to-top characterization parameter (PDIP, P) ψJT 24.9 °C/W P (PDIP) 8-pin package 5
Junction-to-board characterization parameter (PDIP, P) ψJB 34.5 °C/W P (PDIP) 8-pin package 5

CAD (KiCad official)

  • Symbol: LM311P
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: lm311p-etched.step / lm311p-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm311p.step / lm311p.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 1877bb45737cb7e8, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF