main
Ray
Publish 0.1.1
766c66a
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181
{
"slug": "lm2941mdt",
"version": "0.1.1",
"type": "component",
"description": "HGSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-252-4. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"lm2941mdt"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm2941mdt.kicad_sym",
"lm2941mdt.kicad_mod",
"lm2941mdt.glb",
"lm2941mdt.step",
"lm2941mdt.lbr",
"docs/hero.png",
"docs/lm2941mdt-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lm2941mdt-etched.step",
"lm2941mdt-etched.glb",
"lm2941mdt-hero.glb",
"lm2941mdt-hero.overlay.json"
],
"visibility": "public",
"author": {
"name": "Ray"
},
"component": {
"mpn": "LM2941MDT",
"manufacturer": "HGSEMI",
"package": "TO-252-4",
"pin_count": 5,
"category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
"parts": {
"symbol": "lm2941mdt.kicad_sym",
"footprint": "lm2941mdt.kicad_mod",
"model_3d": "lm2941mdt-hero.glb",
"model_3d_plain": "lm2941mdt.glb",
"model_3d_step": "lm2941mdt-etched.step",
"model_3d_step_plain": "lm2941mdt.step",
"lbr": "lm2941mdt.lbr"
},
"pins": [
{
"number": "1",
"name": "ADJUST",
"type": "output",
"description": "Adjust pin. Feedback node for the external resistor divider (R1/R2) that programs the output voltage per VOUT = VREF x (R1+R2)/R1, where VREF is typically 1.275V. Sets output from 5V to 20V."
},
{
"number": "2",
"name": "ON/OFF",
"type": "input",
"description": "TTL/CMOS enable control input. VIN < 0.8V (Von threshold) turns the regulator ON; VIN > 2.0V (Voff threshold) turns it OFF. Input current is typically 50uA (300uA max) at VON/OFF=2.0V. No internal pull; must be externally driven - tie to GND if unused."
},
{
"number": "3",
"name": "IN",
"type": "power_in",
"description": "Unregulated input supply. Recommended operating range up to 26V, absolute maximum 45V. A 470nF (or larger) input bypass capacitor is recommended close to the pin."
},
{
"number": "4",
"name": "OUT",
"type": "power_out",
"description": "Regulated LDO output, 1A capable with typical 0.6V dropout at 1A (1.0V max). Requires a minimum 22uF tantalum output capacitor with ESR between 0.01Ω and 5Ω for loop stability. Internal short-circuit current limit is typically 1.6A."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Ground / device reference. On the TO-252-4 package GND is the exposed metal tab on the back of the package (Metal Tab GND); it must be soldered to the board GND plane, which also serves as the primary thermal path (θJA depends on copper area)."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T19:04:25Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "lm2941mdt.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9.9,
6.5,
2.32
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "d85360b3e2359b76856869bda844e512876c2223b4cf36e7a7e1581f227bec7e",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm2941mdt-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9.9,
6.5,
2.32
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "661ff7422afc1c893fe2fb9f7d7649debac12503269d9c8b583c3acc7f0393f8",
"checked": "2026-10-16",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"characteristics": {
"version": 1,
"source": "datasheet",
"rows": [
{
"name": "Input voltage",
"symbol": "VIN",
"kind": "absolute_maximum",
"unit": "V",
"min": null,
"typ": null,
"max": 45,
"conditions": "",
"source_page": 3,
"source": "datasheet"
},
{
"name": "Input voltage",
"symbol": "VIN",
"kind": "recommended_operating",
"unit": "V",
"min": null,
"typ": null,
"max": 26,
"conditions": "",
"source_page": 3,
"source": "datasheet"
}
]
}
},
"org": "adom"
}