← Commit history
Publish 0.1.1
4 files changed
+323−11
lm2941mdt-hero.glbadded⋯ 1 unchanged line ⋯
lm2941mdt-hero.overlay.jsonadded+194@@ -0,0 +1,194 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LM2941MDT",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 5,+ "span_mm": 12.7,+ "dash_mm": 0.3175,+ "gap_mm": 0.1905,+ "pad_stroke_mm": 0.0762+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 5,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 5,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.848,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -5.79,+ 4.11,+ -3.25,+ 3.25+ ],+ "pads_bbox_mm": [+ -6.14,+ 4.46,+ -2.9,+ 2.9+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "lm2941mdt-etched.glb",+ "glb_sha256": "bfb93926d4fb4f43228e883249c190eb08e46159c2fff58d35d7423e7bdc3e1c",+ "footprint": "lm2941mdt.kicad_mod",+ "footprint_sha256": "37afb57535e0bf469f279c3629db87e6c3edf0e528aca79dc549eb5d4d6a2d27",+ "pins": "page.json component.pins",+ "pins_sha256": "db1c1ec039758ae46ee8bbcdc6bed714c9aeb01f369e92d863fe1c2b8c645f7c"+ },+ "generator": "adom-wiki 1.8.24 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "ADJUST",+ "x": -6.283,+ "y": -2.28,+ "align": "right",+ "vertical": false,+ "h": 0.57+ },+ {+ "pad": "2",+ "text": "ON/OFF",+ "x": -6.283,+ "y": -1.14,+ "align": "right",+ "vertical": false,+ "h": 0.57+ },+ {+ "pad": "3",+ "text": "IN",+ "x": 4.61,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "OUT",+ "x": -6.283,+ "y": 1.14,+ "align": "right",+ "vertical": false,+ "h": 0.57+ },+ {+ "pad": "5",+ "text": "GND",+ "x": -6.283,+ "y": 2.28,+ "align": "right",+ "vertical": false,+ "h": 0.57+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -5.04,+ -2.28+ ],+ "size_mm": [+ 2.2,+ 0.8+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -5.04,+ -1.14+ ],+ "size_mm": [+ 2.2,+ 0.8+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ 1.26,+ 0.0+ ],+ "size_mm": [+ 6.4,+ 5.8+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -5.04,+ 1.14+ ],+ "size_mm": [+ 2.2,+ 0.8+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -5.04,+ 2.28+ ],+ "size_mm": [+ 2.2,+ 0.8+ ],+ "rot": 0.0+ }+ ]+}
package.json+119−3@@ -1,6 +1,6 @@ { "slug": "lm2941mdt",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "HGSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-252-4. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,7 +24,11 @@ "docs/hero.png", "docs/lm2941mdt-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "lm2941mdt-etched.step",+ "lm2941mdt-etched.glb",+ "lm2941mdt-hero.glb",+ "lm2941mdt-hero.overlay.json" ], "metadata": { "characteristics": {@@ -57,5 +61,117 @@ } ] }- }+ },+ "component": {+ "mpn": "LM2941MDT",+ "manufacturer": "HGSEMI",+ "package": "TO-252-4",+ "pin_count": 5,+ "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "parts": {+ "symbol": "lm2941mdt.kicad_sym",+ "footprint": "lm2941mdt.kicad_mod",+ "model_3d": "lm2941mdt-hero.glb",+ "model_3d_plain": "lm2941mdt.glb",+ "model_3d_step": "lm2941mdt-etched.step",+ "model_3d_step_plain": "lm2941mdt.step",+ "lbr": "lm2941mdt.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "ADJUST",+ "type": "output",+ "description": "Adjust pin. Feedback node for the external resistor divider (R1/R2) that programs the output voltage per VOUT = VREF x (R1+R2)/R1, where VREF is typically 1.275V. Sets output from 5V to 20V."+ },+ {+ "number": "2",+ "name": "ON/OFF",+ "type": "input",+ "description": "TTL/CMOS enable control input. VIN < 0.8V (Von threshold) turns the regulator ON; VIN > 2.0V (Voff threshold) turns it OFF. Input current is typically 50uA (300uA max) at VON/OFF=2.0V. No internal pull; must be externally driven - tie to GND if unused."+ },+ {+ "number": "3",+ "name": "IN",+ "type": "power_in",+ "description": "Unregulated input supply. Recommended operating range up to 26V, absolute maximum 45V. A 470nF (or larger) input bypass capacitor is recommended close to the pin."+ },+ {+ "number": "4",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated LDO output, 1A capable with typical 0.6V dropout at 1A (1.0V max). Requires a minimum 22uF tantalum output capacitor with ESR between 0.01Ω and 5Ω for loop stability. Internal short-circuit current limit is typically 1.6A."+ },+ {+ "number": "5",+ "name": "GND",+ "type": "power_in",+ "description": "Ground / device reference. On the TO-252-4 package GND is the exposed metal tab on the back of the package (Metal Tab GND); it must be soldered to the board GND plane, which also serves as the primary thermal path (θJA depends on copper area)."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "digikey": false,+ "mouser": false+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:04:25Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "models_3d": [+ {+ "file": "lm2941mdt.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9.9,+ 6.5,+ 2.32+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "d85360b3e2359b76856869bda844e512876c2223b4cf36e7a7e1581f227bec7e",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm2941mdt-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9.9,+ 6.5,+ 2.32+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "661ff7422afc1c893fe2fb9f7d7649debac12503269d9c8b583c3acc7f0393f8",+ "checked": "2026-10-16",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public" }
page.json+10−8@@ -1,6 +1,6 @@ { "slug": "lm2941mdt",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "HGSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-252-4. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,12 @@ "docs/lm2941mdt-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "lm2941mdt-etched.step"+ "lm2941mdt-etched.step",+ "lm2941mdt-etched.glb",+ "lm2941mdt-hero.glb",+ "lm2941mdt-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -42,7 +43,7 @@ "parts": { "symbol": "lm2941mdt.kicad_sym", "footprint": "lm2941mdt.kicad_mod",- "model_3d": "lm2941mdt-etched.glb",+ "model_3d": "lm2941mdt-hero.glb", "model_3d_plain": "lm2941mdt.glb", "model_3d_step": "lm2941mdt-etched.step", "model_3d_step_plain": "lm2941mdt.step",@@ -175,5 +176,6 @@ } ] }- }-}+ },+ "org": "adom"+}