main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm293pt: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
lm293pt-etched.fit.json lm293pt: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
lm293pt-etched.glb lm293pt: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
lm293pt-etched.step lm293pt: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
lm293pt-hero.glb lm293pt: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
lm293pt-hero.overlay.json lm293pt: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
lm293pt.glb Publish 0.1.0 · Ray
lm293pt.kicad_mod lm293pt: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
lm293pt.kicad_sym Publish 0.1.0 · Ray
lm293pt.lbr lm293pt: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
lm293pt.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md lm293pt: specified limits as data (metadata.characteristics, 27 rows from the datasheet) · Ray

LM293PT

STMicroelectronics · Comparators · TSSOP-8

LM293PT from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out1 output Output of comparator 1; open-collector style output, sink current typically 6 to 18 mA at Vid = 1 V, Vo = 1.5 V, with short-circuit current of approximately 20 mA max.
2 In1- input Inverting input of comparator 1; common-mode range 0 to (VCC+) - 1.5 V at 25 °C, input must not go below -0.3 V.
3 In1+ input Non-inverting input of comparator 1; common-mode range 0 to (VCC+) - 1.5 V at 25 °C, input must not go below -0.3 V.
4 Vcc- power_in Negative supply voltage (ground in single-supply operation); total supply (VCC+) - (VCC-) is 2 to 36 V.
5 In2+ input Non-inverting input of comparator 2; common-mode range 0 to (VCC+) - 1.5 V at 25 °C, input must not go below -0.3 V.
6 In2- input Inverting input of comparator 2; common-mode range 0 to (VCC+) - 1.5 V at 25 °C, input must not go below -0.3 V.
7 Out2 output Output of comparator 2; open-collector style output, sink current typically 6 to 18 mA at Vid = 1 V, Vo = 1.5 V, with short-circuit current of approximately 20 mA max.
8 Vcc+ power_in Positive supply voltage; total supply (VCC+) - (VCC-) is 2 to 36 V (abs max ±18 or 36 V).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage (Tmin ≤ Tamb ≤ Tmax) Vio 9 mV Tmin ≤ Tamb ≤ Tmax 6
Input offset current (Tmin ≤ Tamb ≤ Tmax) Iio 150 nA Tmin ≤ Tamb ≤ Tmax 6
Input bias current (I+ or I-) (Tmin ≤ Tamb ≤ Tmax) Iib 400 nA Tmin ≤ Tamb ≤ Tmax 6
Low-level output voltage (Tmin ≤ Tamb ≤ Tmax) VOL 700 mV Tmin ≤ Tamb ≤ Tmax 6
High-level output current (Tmin ≤ Tamb ≤ Tmax) IOH 1 µA Tmin ≤ Tamb ≤ Tmax 6
High-level output current IOH 0.1 nA VCC = Vo = 30 V, Vid = 1 V 6
Input offset voltage Vio 1 5 mV VCC + = 5 V, VCC - = 0 V, Tamb = 25 °C 6
Input offset current Iio 3 50 nA VCC + = 5 V, VCC - = 0 V, Tamb = 25 °C 6
Input bias current (I+ or I-) Iib 20 250 nA VCC + = 5 V, VCC - = 0 V, Tamb = 25 °C 6
Large signal voltage gain Avd 50 200 V/mV VCC = 15 V, RL = 15 kΩ, Vo = 1 V to 11 V 6
Supply current (all comparators), VCC = 5 V ICC 0.45 1 mA VCC = 5 V, no load 6
Supply current (all comparators), VCC = 30 V ICC 0.6 2.5 mA VCC = 30 V, no load 6
Low-level output voltage VOL 80 400 mV Vid = -1 V, Isink = 4 mA 6
Output sink current Isink 6 18 mA Vid = 1 V, Vo = 1.5 V 6
Response time tre 1.3 µs RL = 5.1 kΩ connected to VCC + 6
Large signal response time trel 300 ns RL = 5.1 kΩ connected to VCC +, TTL input, V(ref) = 1.4 V 6
Supply voltage VCC 2 36 V (VCC +) - (VCC -) 5
Common mode input voltage range (Tamb = 25 °C) Vicm 0 V VCC + = 30 V, Tamb = 25 °C; upper limit (VCC+)-1.5 V 5
Common mode input voltage range (Tmin ≤ Tamb ≤ Tmax) Vicm 0 V VCC + = 30 V, Tmin ≤ Tamb ≤ Tmax; upper limit (VCC+)-2 V 5
Operating free-air temperature range (LM293) Toper -40 105 °C LM293, LM293A 5
Supply voltage VCC 36 V Printed as ±18 or 36 V 4
Differential input voltage (LM193, LM293, LM393) Vid -36 36 V LM193, LM293, LM393 4
Input voltage (LM193, LM293, LM393) Vin -0.3 36 V LM193, LM293, LM393 4
Thermal resistance junction to ambient (TSSOP8) Rthja 120 °C/W TSSOP8 package; values are typical 4
Thermal resistance junction to case (TSSOP8) Rthjc 37 °C/W TSSOP8 package; values are typical 4
Maximum junction temperature Tj 150 °C 4
Storage temperature range Tstg -65 150 °C 4

CAD (KiCad official)

  • Symbol: LM293PT
  • Footprint: Package_SO:TSSOP-8_3x3mm_P0.65mm
  • 3D model: TSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm293pt-etched.step / lm293pt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm293pt.step / lm293pt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (18 pp, sha256 31d06d834156345d, retrieved 2026-10-03, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF