3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM293PT
STMicroelectronics · Comparators · TSSOP-8
LM293PT from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Output of comparator 1; open-collector style output, sink current typically 6 to 18 mA at Vid = 1 V, Vo = 1.5 V, with short-circuit current of approximately 20 mA max. |
| 2 | In1- | input | Inverting input of comparator 1; common-mode range 0 to (VCC+) - 1.5 V at 25 °C, input must not go below -0.3 V. |
| 3 | In1+ | input | Non-inverting input of comparator 1; common-mode range 0 to (VCC+) - 1.5 V at 25 °C, input must not go below -0.3 V. |
| 4 | Vcc- | power_in | Negative supply voltage (ground in single-supply operation); total supply (VCC+) - (VCC-) is 2 to 36 V. |
| 5 | In2+ | input | Non-inverting input of comparator 2; common-mode range 0 to (VCC+) - 1.5 V at 25 °C, input must not go below -0.3 V. |
| 6 | In2- | input | Inverting input of comparator 2; common-mode range 0 to (VCC+) - 1.5 V at 25 °C, input must not go below -0.3 V. |
| 7 | Out2 | output | Output of comparator 2; open-collector style output, sink current typically 6 to 18 mA at Vid = 1 V, Vo = 1.5 V, with short-circuit current of approximately 20 mA max. |
| 8 | Vcc+ | power_in | Positive supply voltage; total supply (VCC+) - (VCC-) is 2 to 36 V (abs max ±18 or 36 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (Tmin ≤ Tamb ≤ Tmax) | Vio | 9 | mV | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input offset current (Tmin ≤ Tamb ≤ Tmax) | Iio | 150 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input bias current (I+ or I-) (Tmin ≤ Tamb ≤ Tmax) | Iib | 400 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Low-level output voltage (Tmin ≤ Tamb ≤ Tmax) | VOL | 700 | mV | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| High-level output current (Tmin ≤ Tamb ≤ Tmax) | IOH | 1 | µA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| High-level output current | IOH | 0.1 | nA | VCC = Vo = 30 V, Vid = 1 V | 6 | ||
| Input offset voltage | Vio | 1 | 5 | mV | VCC + = 5 V, VCC - = 0 V, Tamb = 25 °C | 6 | |
| Input offset current | Iio | 3 | 50 | nA | VCC + = 5 V, VCC - = 0 V, Tamb = 25 °C | 6 | |
| Input bias current (I+ or I-) | Iib | 20 | 250 | nA | VCC + = 5 V, VCC - = 0 V, Tamb = 25 °C | 6 | |
| Large signal voltage gain | Avd | 50 | 200 | V/mV | VCC = 15 V, RL = 15 kΩ, Vo = 1 V to 11 V | 6 | |
| Supply current (all comparators), VCC = 5 V | ICC | 0.45 | 1 | mA | VCC = 5 V, no load | 6 | |
| Supply current (all comparators), VCC = 30 V | ICC | 0.6 | 2.5 | mA | VCC = 30 V, no load | 6 | |
| Low-level output voltage | VOL | 80 | 400 | mV | Vid = -1 V, Isink = 4 mA | 6 | |
| Output sink current | Isink | 6 | 18 | mA | Vid = 1 V, Vo = 1.5 V | 6 | |
| Response time | tre | 1.3 | µs | RL = 5.1 kΩ connected to VCC + | 6 | ||
| Large signal response time | trel | 300 | ns | RL = 5.1 kΩ connected to VCC +, TTL input, V(ref) = 1.4 V | 6 | ||
| Supply voltage | VCC | 2 | 36 | V | (VCC +) - (VCC -) | 5 | |
| Common mode input voltage range (Tamb = 25 °C) | Vicm | 0 | V | VCC + = 30 V, Tamb = 25 °C; upper limit (VCC+)-1.5 V | 5 | ||
| Common mode input voltage range (Tmin ≤ Tamb ≤ Tmax) | Vicm | 0 | V | VCC + = 30 V, Tmin ≤ Tamb ≤ Tmax; upper limit (VCC+)-2 V | 5 | ||
| Operating free-air temperature range (LM293) | Toper | -40 | 105 | °C | LM293, LM293A | 5 | |
| Supply voltage | VCC | 36 | V | Printed as ±18 or 36 V | 4 | ||
| Differential input voltage (LM193, LM293, LM393) | Vid | -36 | 36 | V | LM193, LM293, LM393 | 4 | |
| Input voltage (LM193, LM293, LM393) | Vin | -0.3 | 36 | V | LM193, LM293, LM393 | 4 | |
| Thermal resistance junction to ambient (TSSOP8) | Rthja | 120 | °C/W | TSSOP8 package; values are typical | 4 | ||
| Thermal resistance junction to case (TSSOP8) | Rthjc | 37 | °C/W | TSSOP8 package; values are typical | 4 | ||
| Maximum junction temperature | Tj | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 |
CAD (KiCad official)
- Symbol:
LM293PT - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm293pt-etched.step/lm293pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm293pt.step/lm293pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (18 pp, sha256
31d06d834156345d, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).