main
Ray Publish 0.2.0 f30b776
{
  "slug": "lm29152rs",
  "version": "0.2.0",
  "type": "component",
  "description": "HTC Korea TAEJIN Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-252-5. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "lm29152rs",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm29152rs.kicad_sym",
    "lm29152rs.kicad_mod",
    "lm29152rs.glb",
    "lm29152rs.step",
    "lm29152rs.lbr",
    "docs/hero.png",
    "docs/lm29152rs-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm29152rs-hero.glb",
    "lm29152rs-hero.overlay.json"
  ],
  "component": {
    "mpn": "LM29152RS",
    "manufacturer": "HTC Korea TAEJIN Tech",
    "package": "TO-252-5",
    "pin_count": 6,
    "category": "PMIC",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/6858ebcd634d43c21d5b459a005f9dd5.pdf",
    "parts": {
      "symbol": "lm29152rs.kicad_sym",
      "footprint": "lm29152rs.kicad_mod",
      "model_3d": "lm29152rs-hero.glb",
      "model_3d_plain": "lm29152rs.glb",
      "model_3d_step": "lm29152rs-etched.step",
      "model_3d_step_plain": "lm29152rs.step",
      "lbr": "lm29152rs.lbr"
    },
    "distributor_links": {
      "lcsc": "C262536",
      "digikey": "5536-LM29152RSTR-ND"
    },
    "distributor_check": {
      "checked_at": "2026-11-17T06:48:25Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "5536-LM29152RSTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Chip enable input. Logic high (VEN >= 2.4 V) turns the regulator on; logic low (VEN <= 0.8 V) puts the device in zero-current shutdown (IOUT typ 10 uA, max 500 uA at VIN <= 26 V). May be tied to VIN if ON/OFF control is not required. Absolute max VEN = -20 V to +60 V; recommended operating -/+26 V."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply. Recommended operating range up to +26 V; absolute max -20 V to +60 V (60 V limited to <100 ms, <=1% duty). Bypass with an input capacitor (CIN) close to the pin."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground / return. Ground pin current is typ 8 mA at IO = 750 mA and typ 22 mA at IO = 1.5 A (max 20 mA at 750 mA per data). Also serves as the thermal reference for the exposed tab."
      },
      {
        "number": "4",
        "name": "VOUT",
        "type": "power_out",
        "description": "Regulated output. Delivers up to 1.5 A with 350 mV (typ) full-load dropout. On the adjustable LM29152 the output voltage is set by an external divider: VOUT = VREF x (1 + R1/R2), VREF = 1.24 V typ (1.215 - 1.265 V). Current limit typ 2.1 A (max 3.5 A). Requires an output capacitor (COUT) for stability."
      },
      {
        "number": "5",
        "name": "ADJ",
        "type": "input",
        "description": "Adjust pin for the LM29152 adjustable variant (this pin is labeled FLG/ADJ in the shared pinout table; on LM29152 it is the ADJ feedback input, on LM29151 it is the FLG error-flag open-drain output). Connect to the R1/R2 divider tap from VOUT to GND to program VOUT = 1.24 V x (1 + R1/R2). Adjust-pin bias current is typ 40 nA (max 80 nA)."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Package tab (pad 6). the sheet does not name the tab's net; centre lead's net per the package (TO-263/TO-252 tab and centre lead are one piece of lead frame; task master ruling 2026-11-17): pin 3 is GND."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/6858ebcd634d43c21d5b459a005f9dd5.pdf",
        "pages": 12,
        "sha256": "edf268513dcf5ffe",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm29152rs.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.9,
          6.5,
          2.32
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "15de31a63a2171bb645751e5fc084565bc3209818acba65544b612cee610249a",
        "checked": "2026-11-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm29152rs-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.9,
          6.5,
          2.32
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "54829306d9ab647fe9e72d84b6a575c4ef70c0f395c1a1e1d662f511b2960d32",
        "checked": "2026-11-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}