main
Ray
Publish 0.2.0
f30b776
LM29152RS
HTC Korea TAEJIN Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252-5
LM29152RS from HTC Korea TAEJIN Tech, in a TO-252-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Chip enable input. Logic high (VEN >= 2.4 V) turns the regulator on; logic low (VEN <= 0.8 V) puts the device in zero-current shutdown (IOUT typ 10 uA, max 500 uA at VIN <= 26 V). May be tied to VIN if ON/OFF control is not required. Absolute max VEN = -20 V to +60 V; recommended operating -/+26 V. |
| 2 | VIN | power_in | Input supply. Recommended operating range up to +26 V; absolute max -20 V to +60 V (60 V limited to <100 ms, <=1% duty). Bypass with an input capacitor (CIN) close to the pin. |
| 3 | GND | power_in | Device ground / return. Ground pin current is typ 8 mA at IO = 750 mA and typ 22 mA at IO = 1.5 A (max 20 mA at 750 mA per data). Also serves as the thermal reference for the exposed tab. |
| 4 | VOUT | power_out | Regulated output. Delivers up to 1.5 A with 350 mV (typ) full-load dropout. On the adjustable LM29152 the output voltage is set by an external divider: VOUT = VREF x (1 + R1/R2), VREF = 1.24 V typ (1.215 - 1.265 V). Current limit typ 2.1 A (max 3.5 A). Requires an output capacitor (COUT) for stability. |
| 5 | ADJ | input | Adjust pin for the LM29152 adjustable variant (this pin is labeled FLG/ADJ in the shared pinout table; on LM29152 it is the ADJ feedback input, on LM29151 it is the FLG error-flag open-drain output). Connect to the R1/R2 divider tap from VOUT to GND to program VOUT = 1.24 V x (1 + R1/R2). Adjust-pin bias current is typ 40 nA (max 80 nA). |
| 6 | GND | power_in | Package tab (pad 6). the sheet does not name the tab's net; centre lead's net per the package (TO-263/TO-252 tab and centre lead are one piece of lead frame; task master ruling 2026-11-17): pin 3 is GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTC Korea TAEJIN Tech |
| Package | TO-252-5 |
| Category | PMIC |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (IO = 10mA) | VOUT | -1 | 1 | % | IO = 10mA | 6 | |
| Output Voltage (10mA≤IO≤IFL) | VOUT | -2 | 2 | % | 10mA≤IO≤ IFL, (VOUT+1V)≤VIN≤26V (Note 2) | 6 | |
| Line Regulation | ΔVLINE | 0.06 | 0.5 | % | IO = 10mA, (VOUT+1V)≤VIN≤26V | 6 | |
| Load Regulation | ΔVLOAD | 0.2 | 1 | % | VIN=VOUT+5V, 10mA≤IOUT≤IFULLOAD (Note 2,6) | 6 | |
| Output Voltage Temp. Coefficient | ΔVo/ΔT | 20 | 100 | ppm/℃ | Note 6 | 6 | |
| Dropout Voltage at IO = 100mA | VDO | 80 | 200 | mV | ΔVOUT = -1%, (Note 3), IO = 100mA | 6 | |
| Dropout Voltage at IO = 750mA | VDO | 220 | mV | ΔVOUT = -1%, (Note 3), IO = 750mA | 6 | ||
| Dropout Voltage at IO = 1.5A | VDO | 350 | 600 | mV | ΔVOUT = -1%, (Note 3), IO = 1.5A | 6 | |
| Ground Current at IO = 750mA | IGND | 8 | 22 | mA | IO = 750mA, VIN = VOUT+1V | 6 | |
| Ground Current at IO = 1.5A | IGND | 20 | mA | IO = 1.5A | 6 | ||
| Reference Voltage | VREF | 1.215 | 1.24 | 1.265 | V | Bold values guaranteed across operating temperature range | 7 |
| Reference Voltage (Note 8) | VREF | 1.203 | 1.277 | V | Note 8: VREF ≤ VOUT ≤ (VIN -1V), 2.3V ≤ VIN ≤ 26V, 10mA < IL < IFL, TJ < TJ Max. | 7 | |
| Adjust Pin Bias Current | IADJ | 40 | 80 | 120 | nA | 7 | |
| Enable Input Voltage Logic High (On) | VEN | 2.4 | V | Logic High (On) | 7 | ||
| Enable Input Voltage Logic Low (Off) | VEN | 0.8 | V | Logic Low (Off) | 7 | ||
| Enable Pin Input Current | IEN | 100 | 600 | 750 | μA | VEN = 26V | 7 |
| Enable Pin Input Current | IEN | 2.5 | 5 | μA | VEN = 0.8V | 7 | |
| Regulator Output Current in Shutdown | 10 | 500 | μA | Note 10: VEN ≤ 0.8V and VIN ≤ 26V, VOUT = 0 | 7 | ||
| Operating Input Voltage | VIN | 26 | V | 2 | |||
| Operating Enable Input Voltage | VEN | 26 | V | 2 | |||
| Junction Temperature | TJ | -40 | 125 | ℃ | 2 | ||
| Input Supply Voltage | VIN | -20 | 60 | V | Note 1: maximum 60V must be of limited duration (<100msec) and duty cycle (≤1%); maximum continuous supply 26V | 1 | |
| Enable Input Voltage | VEN | -20 | 60 | V | Note 1 | 1 | |
| Lead Temperature (Soldering) | TSOL | 260 | ℃ | Soldering, 5 sec | 1 | ||
| Storage Temperature Range | TSTG | -65 | 150 | ℃ | 1 | ||
| Reference Voltage Temp. Coefficient | 20 | ppm/℃ | Note 7 | 7 | |||
| Adjust Pin Bias Current Temp. Coefficient | 0.1 | nA/℃ | 7 |
CAD (KiCad official)
- Symbol:
LM29152RS - Footprint:
Package_TO_SOT_SMD:TO-252-5_TabPin6 - 3D model: TO-252-5 (KiCad packages3D, STEP)
- 3D model files:
lm29152rs-etched.step/lm29152rs-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm29152rs.step/lm29152rs.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTC Korea TAEJIN Tech datasheet (12 pp, sha256
edf268513dcf5ffe, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM29152RS
**HTC Korea TAEJIN Tech** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252-5
LM29152RS from HTC Korea TAEJIN Tech, in a TO-252-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Chip enable input. Logic high (VEN >= 2.4 V) turns the regulator on; logic low (VEN <= 0.8 V) puts the device in zero-current shutdown (IOUT typ 10 uA, max 500 uA at VIN <= 26 V). May be tied to VIN if ON/OFF control is not required. Absolute max VEN = -20 V to +60 V; recommended operating -/+26 V. |
| 2 | VIN | power_in | Input supply. Recommended operating range up to +26 V; absolute max -20 V to +60 V (60 V limited to <100 ms, <=1% duty). Bypass with an input capacitor (CIN) close to the pin. |
| 3 | GND | power_in | Device ground / return. Ground pin current is typ 8 mA at IO = 750 mA and typ 22 mA at IO = 1.5 A (max 20 mA at 750 mA per data). Also serves as the thermal reference for the exposed tab. |
| 4 | VOUT | power_out | Regulated output. Delivers up to 1.5 A with 350 mV (typ) full-load dropout. On the adjustable LM29152 the output voltage is set by an external divider: VOUT = VREF x (1 + R1/R2), VREF = 1.24 V typ (1.215 - 1.265 V). Current limit typ 2.1 A (max 3.5 A). Requires an output capacitor (COUT) for stability. |
| 5 | ADJ | input | Adjust pin for the LM29152 adjustable variant (this pin is labeled FLG/ADJ in the shared pinout table; on LM29152 it is the ADJ feedback input, on LM29151 it is the FLG error-flag open-drain output). Connect to the R1/R2 divider tap from VOUT to GND to program VOUT = 1.24 V x (1 + R1/R2). Adjust-pin bias current is typ 40 nA (max 80 nA). |
| 6 | GND | power_in | Package tab (pad 6). the sheet does not name the tab's net; centre lead's net per the package (TO-263/TO-252 tab and centre lead are one piece of lead frame; task master ruling 2026-11-17): pin 3 is GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTC Korea TAEJIN Tech |
| Package | TO-252-5 |
| Category | PMIC |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (IO = 10mA) | VOUT | -1 | | 1 | % | IO = 10mA | 6 |
| Output Voltage (10mA≤IO≤IFL) | VOUT | -2 | | 2 | % | 10mA≤IO≤ IFL, (VOUT+1V)≤VIN≤26V (Note 2) | 6 |
| Line Regulation | ΔVLINE | | 0.06 | 0.5 | % | IO = 10mA, (VOUT+1V)≤VIN≤26V | 6 |
| Load Regulation | ΔVLOAD | | 0.2 | 1 | % | VIN=VOUT+5V, 10mA≤IOUT≤IFULLOAD (Note 2,6) | 6 |
| Output Voltage Temp. Coefficient | ΔVo/ΔT | | 20 | 100 | ppm/℃ | Note 6 | 6 |
| Dropout Voltage at IO = 100mA | VDO | | 80 | 200 | mV | ΔVOUT = -1%, (Note 3), IO = 100mA | 6 |
| Dropout Voltage at IO = 750mA | VDO | | 220 | | mV | ΔVOUT = -1%, (Note 3), IO = 750mA | 6 |
| Dropout Voltage at IO = 1.5A | VDO | | 350 | 600 | mV | ΔVOUT = -1%, (Note 3), IO = 1.5A | 6 |
| Ground Current at IO = 750mA | IGND | | 8 | 22 | mA | IO = 750mA, VIN = VOUT+1V | 6 |
| Ground Current at IO = 1.5A | IGND | | 20 | | mA | IO = 1.5A | 6 |
| Reference Voltage | VREF | 1.215 | 1.24 | 1.265 | V | Bold values guaranteed across operating temperature range | 7 |
| Reference Voltage (Note 8) | VREF | 1.203 | | 1.277 | V | Note 8: VREF ≤ VOUT ≤ (VIN -1V), 2.3V ≤ VIN ≤ 26V, 10mA < IL < IFL, TJ < TJ Max. | 7 |
| Adjust Pin Bias Current | IADJ | 40 | 80 | 120 | nA | | 7 |
| Enable Input Voltage Logic High (On) | VEN | 2.4 | | | V | Logic High (On) | 7 |
| Enable Input Voltage Logic Low (Off) | VEN | | | 0.8 | V | Logic Low (Off) | 7 |
| Enable Pin Input Current | IEN | 100 | 600 | 750 | μA | VEN = 26V | 7 |
| Enable Pin Input Current | IEN | | 2.5 | 5 | μA | VEN = 0.8V | 7 |
| Regulator Output Current in Shutdown | | | 10 | 500 | μA | Note 10: VEN ≤ 0.8V and VIN ≤ 26V, VOUT = 0 | 7 |
| Operating Input Voltage | VIN | | | 26 | V | | 2 |
| Operating Enable Input Voltage | VEN | | | 26 | V | | 2 |
| Junction Temperature | TJ | -40 | | 125 | ℃ | | 2 |
| Input Supply Voltage | VIN | -20 | | 60 | V | Note 1: maximum 60V must be of limited duration (<100msec) and duty cycle (≤1%); maximum continuous supply 26V | 1 |
| Enable Input Voltage | VEN | -20 | | 60 | V | Note 1 | 1 |
| Lead Temperature (Soldering) | TSOL | | | 260 | ℃ | Soldering, 5 sec | 1 |
| Storage Temperature Range | TSTG | -65 | | 150 | ℃ | | 1 |
| Reference Voltage Temp. Coefficient | | | 20 | | ppm/℃ | Note 7 | 7 |
| Adjust Pin Bias Current Temp. Coefficient | | | 0.1 | | nA/℃ | | 7 |
## CAD (KiCad official)
- Symbol: `LM29152RS`
- Footprint: `Package_TO_SOT_SMD:TO-252-5_TabPin6`
- 3D model: TO-252-5 (KiCad packages3D, STEP)
- 3D model files: `lm29152rs-etched.step` / `lm29152rs-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm29152rs.step` / `lm29152rs.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HTC Korea TAEJIN Tech datasheet](docs/lm29152rs-datasheet.pdf) (12 pp, sha256 `edf268513dcf5ffe`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm29152rs-datasheet.pdf)