main
Ray
Publish 0.1.0
343fa14
LM2904AQTH-13
Diodes Incorporated · Operational Amplifier · TSSOP-8
LM2904AQTH-13 from Diodes Incorporated, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Channel 1 output; the output swings from 0V to VCC -1.5V. |
| 2 | 1IN- | input | Channel 1 inverting input; input voltages should not go negative by more than -0.3V (@ +25°C), and either input can go to +36V without damage. |
| 3 | 1IN+ | input | Channel 1 non-inverting input; the input common-mode voltage range includes ground and either input can go to +36V without damage. |
| 4 | GND | power_in | Ground pin; the supply should be bypassed to this pin with a minimum 0.1µF capacitor placed as close as possible to VCC. |
| 5 | 2IN+ | input | Channel 2 non-inverting input; the input common-mode voltage range includes ground and either input can go to +36V without damage. |
| 6 | 2IN- | input | Channel 2 inverting input; input voltages should not go negative by more than -0.3V (@ +25°C), and either input can go to +36V without damage. |
| 7 | 2OUT | output | Channel 2 output; the output swings from 0V to VCC -1.5V. |
| 8 | VCC | power_in | Chip supply voltage; single supply 2V to 36V or dual supplies ±1V to ±18V per the Recommended Operating Conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (A-Suffix), TA=+25°C | VIO | 1 | 2 | mV | A-Suffix Device, VIC=VCMR min, VO=1.4V, VCC=5V to max, RS=0Ω, TA=+25°C | 6 | |
| Input Offset Voltage (A-Suffix), Full Range | VIO | 4 | mV | A-Suffix Device, Full Range | 6 | ||
| Input Bias Current, TA=+25°C | IB | -20 | -250 | nA | IIN+ or IIN− with OUT in linear range, VCMR=0V (Note 10), TA=+25°C | 6 | |
| Input Bias Current, Full Range | IB | -500 | nA | IIN+ or IIN− with OUT in linear range, VCMR=0V (Note 10), Full Range | 6 | ||
| Input Offset Current, TA=+25°C | IIO | 2 | 50 | nA | IIN+ − IIN−, VCM=0V, TA=+25°C | 6 | |
| Input Offset Current, Full Range | IIO | 150 | nA | IIN+ − IIN−, VCM=0V, Full Range | 6 | ||
| Input Common-Mode Voltage Range, TA=+25°C | VCMR | 0 | V | VCC = 30V (Note 11), TA=+25°C | 6 | ||
| Input Common-Mode Voltage Range, Full Range | VCMR | 0 | V | VCC = 30V (Note 11), Full Range | 6 | ||
| Supply Current (Two Amplifiers), VCC=30V | ICC | 0.7 | 2 | mA | VO = 0.5 VCC, No Load, VCC = 30V, Full Range | 6 | |
| Supply Current (Two Amplifiers), VCC=5V | ICC | 0.5 | 1.2 | mA | VO = 0.5 VCC, No Load, VCC = 5V, Full Range | 6 | |
| Large Signal Voltage Gain, TA=+25°C | AV | 25 | 100 | V/mV | VCC = 15V, VOUT = 1V to 11V, RL ≥ 2kΩ, TA = +25°C | 6 | |
| Large Signal Voltage Gain, Full Range | AV | 15 | V/mV | VCC = 15V, VOUT = 1V to 11V, RL ≥ 2kΩ, Full Range | 6 | ||
| Common Mode Rejection Ratio | CMRR | 60 | 70 | dB | DC, VCMR = 0V to VCC-1.5V, TA = +25°C | 6 | |
| Power Supply Rejection Ratio | PSRR | 70 | 100 | dB | VCC = 5V to 30V, TA = +25°C | 6 | |
| Output Current Sink, VO=200mV | ISINK | 12 | 50 | µA | VIN- = 1V, VIN+ = 0V, VCC = 15V, VO = 200mV, TA = +25°C | 6 | |
| Output Current Sink, VO=15V, TA=+25°C | ISINK | 10 | 20 | mA | VIN- = 1V, VIN+ = 0V, VCC = 15V, VO = 15V, TA = +25°C | 6 | |
| Output Current Sink, VO=15V, Full Range | ISINK | 5 | mA | VIN- = 1V, VIN+ = 0V, VCC = 15V, VO = 15V, Full Range | 6 | ||
| Output Current Source, TA=+25°C | ISOURCE | -20 | -40 | -60 | VIN+ = 1V, VIN- = 0V, VCC = 15V, VO = 0V, TA = +25°C | 6 | |
| Output Current Source, Full Range | ISOURCE | -10 | VIN+ = 1V, VIN- = 0V, VCC = 15V, VO = 0V, Full Range | 6 | |||
| Short-Circuit Current to Ground | ISC | 40 | 60 | mA | VCC = 5V, GND = -5V, VO = 0V, TA = +25°C | 6 | |
| High-Level Output Voltage Swing, VCC=30V, RL=2kΩ, Full Range | VOH | 26 | V | VCC = 30V, RL = 2kΩ, Full Range | 6 | ||
| High-Level Output Voltage Swing, VCC=30V, RL≥10kΩ | VOH | 27 | 28 | V | VCC = 30V, RL ≥ 10kΩ | 6 | |
| Low-Level Output Voltage Swing, Full Range | VOL | 5 | 20 | mV | RL ≤ 10kΩ, Full Range | 6 | |
| Single Supply Voltage | 2 | 36 | V | Single Supply, over operating free-air temperature range | 4 | ||
| Dual Supply Voltage | 1 | 18 | V | Dual Supply, printed as ±1 to ±18, over operating free-air temperature range | 4 | ||
| Ambient Temperature Range | TA | -40 | 125 | °C | Over operating free-air temperature range | 4 | |
| Junction Temperature Range | TJ | -40 | 125 | °C | Over operating free-air temperature range | 4 | |
| Supply Voltage | VCC | 36 | V | @TA = +25°C; printed as ±18 or 36 | 4 | ||
| Differential Input Voltage | VID | 36 | V | @TA = +25°C | 4 | ||
| Input Voltage | VIN | -0.3 | 36 | V | @TA = +25°C | 4 | |
| Operating Temperature Range | TA | -40 | 125 | °C | @TA = +25°C, unless otherwise specified | 4 | |
| Operating Junction Temperature | TJ | 150 | °C | @TA = +25°C, unless otherwise specified | 4 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | @TA = +25°C, unless otherwise specified | 4 | |
| ESD Human Body Model, TSSOP-8 | 500 | V | Human body model, 1.5kΩ in series with 100pF (Note 7) | 4 | |||
| Package Thermal Impedance, TSSOP-8 | θJA | 175 | °C/W | Package thermal impedance (Note 5), TSSOP-8 | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | • Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 • Weight: | 19 |
CAD (KiCad official)
- Symbol:
LM2904AQTH-13 - Footprint:
Package_SO:TSSOP-8_4.4x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm2904aqth-13-etched.step/lm2904aqth-13-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2904aqth-13.step/lm2904aqth-13.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (20 pp, sha256
12a3965c03721356, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2904AQTH-13
**Diodes Incorporated** · Operational Amplifier · TSSOP-8
LM2904AQTH-13 from Diodes Incorporated, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Channel 1 output; the output swings from 0V to VCC -1.5V. |
| 2 | 1IN- | input | Channel 1 inverting input; input voltages should not go negative by more than -0.3V (@ +25°C), and either input can go to +36V without damage. |
| 3 | 1IN+ | input | Channel 1 non-inverting input; the input common-mode voltage range includes ground and either input can go to +36V without damage. |
| 4 | GND | power_in | Ground pin; the supply should be bypassed to this pin with a minimum 0.1µF capacitor placed as close as possible to VCC. |
| 5 | 2IN+ | input | Channel 2 non-inverting input; the input common-mode voltage range includes ground and either input can go to +36V without damage. |
| 6 | 2IN- | input | Channel 2 inverting input; input voltages should not go negative by more than -0.3V (@ +25°C), and either input can go to +36V without damage. |
| 7 | 2OUT | output | Channel 2 output; the output swings from 0V to VCC -1.5V. |
| 8 | VCC | power_in | Chip supply voltage; single supply 2V to 36V or dual supplies ±1V to ±18V per the Recommended Operating Conditions. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (A-Suffix), TA=+25°C | VIO | | 1 | 2 | mV | A-Suffix Device, VIC=VCMR min, VO=1.4V, VCC=5V to max, RS=0Ω, TA=+25°C | 6 |
| Input Offset Voltage (A-Suffix), Full Range | VIO | | | 4 | mV | A-Suffix Device, Full Range | 6 |
| Input Bias Current, TA=+25°C | IB | | -20 | -250 | nA | IIN+ or IIN− with OUT in linear range, VCMR=0V (Note 10), TA=+25°C | 6 |
| Input Bias Current, Full Range | IB | | | -500 | nA | IIN+ or IIN− with OUT in linear range, VCMR=0V (Note 10), Full Range | 6 |
| Input Offset Current, TA=+25°C | IIO | | 2 | 50 | nA | IIN+ − IIN−, VCM=0V, TA=+25°C | 6 |
| Input Offset Current, Full Range | IIO | | | 150 | nA | IIN+ − IIN−, VCM=0V, Full Range | 6 |
| Input Common-Mode Voltage Range, TA=+25°C | VCMR | 0 | | | V | VCC = 30V (Note 11), TA=+25°C | 6 |
| Input Common-Mode Voltage Range, Full Range | VCMR | 0 | | | V | VCC = 30V (Note 11), Full Range | 6 |
| Supply Current (Two Amplifiers), VCC=30V | ICC | | 0.7 | 2 | mA | VO = 0.5 VCC, No Load, VCC = 30V, Full Range | 6 |
| Supply Current (Two Amplifiers), VCC=5V | ICC | | 0.5 | 1.2 | mA | VO = 0.5 VCC, No Load, VCC = 5V, Full Range | 6 |
| Large Signal Voltage Gain, TA=+25°C | AV | 25 | 100 | | V/mV | VCC = 15V, VOUT = 1V to 11V, RL ≥ 2kΩ, TA = +25°C | 6 |
| Large Signal Voltage Gain, Full Range | AV | 15 | | | V/mV | VCC = 15V, VOUT = 1V to 11V, RL ≥ 2kΩ, Full Range | 6 |
| Common Mode Rejection Ratio | CMRR | 60 | 70 | | dB | DC, VCMR = 0V to VCC-1.5V, TA = +25°C | 6 |
| Power Supply Rejection Ratio | PSRR | 70 | 100 | | dB | VCC = 5V to 30V, TA = +25°C | 6 |
| Output Current Sink, VO=200mV | ISINK | 12 | 50 | | µA | VIN- = 1V, VIN+ = 0V, VCC = 15V, VO = 200mV, TA = +25°C | 6 |
| Output Current Sink, VO=15V, TA=+25°C | ISINK | 10 | 20 | | mA | VIN- = 1V, VIN+ = 0V, VCC = 15V, VO = 15V, TA = +25°C | 6 |
| Output Current Sink, VO=15V, Full Range | ISINK | 5 | | | mA | VIN- = 1V, VIN+ = 0V, VCC = 15V, VO = 15V, Full Range | 6 |
| Output Current Source, TA=+25°C | ISOURCE | -20 | -40 | -60 | | VIN+ = 1V, VIN- = 0V, VCC = 15V, VO = 0V, TA = +25°C | 6 |
| Output Current Source, Full Range | ISOURCE | -10 | | | | VIN+ = 1V, VIN- = 0V, VCC = 15V, VO = 0V, Full Range | 6 |
| Short-Circuit Current to Ground | ISC | | 40 | 60 | mA | VCC = 5V, GND = -5V, VO = 0V, TA = +25°C | 6 |
| High-Level Output Voltage Swing, VCC=30V, RL=2kΩ, Full Range | VOH | 26 | | | V | VCC = 30V, RL = 2kΩ, Full Range | 6 |
| High-Level Output Voltage Swing, VCC=30V, RL≥10kΩ | VOH | 27 | 28 | | V | VCC = 30V, RL ≥ 10kΩ | 6 |
| Low-Level Output Voltage Swing, Full Range | VOL | | 5 | 20 | mV | RL ≤ 10kΩ, Full Range | 6 |
| Single Supply Voltage | | 2 | | 36 | V | Single Supply, over operating free-air temperature range | 4 |
| Dual Supply Voltage | | 1 | | 18 | V | Dual Supply, printed as ±1 to ±18, over operating free-air temperature range | 4 |
| Ambient Temperature Range | TA | -40 | | 125 | °C | Over operating free-air temperature range | 4 |
| Junction Temperature Range | TJ | -40 | | 125 | °C | Over operating free-air temperature range | 4 |
| Supply Voltage | VCC | | | 36 | V | @TA = +25°C; printed as ±18 or 36 | 4 |
| Differential Input Voltage | VID | | | 36 | V | @TA = +25°C | 4 |
| Input Voltage | VIN | -0.3 | | 36 | V | @TA = +25°C | 4 |
| Operating Temperature Range | TA | -40 | | 125 | °C | @TA = +25°C, unless otherwise specified | 4 |
| Operating Junction Temperature | TJ | | | 150 | °C | @TA = +25°C, unless otherwise specified | 4 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | @TA = +25°C, unless otherwise specified | 4 |
| ESD Human Body Model, TSSOP-8 | | | | 500 | V | Human body model, 1.5kΩ in series with 100pF (Note 7) | 4 |
| Package Thermal Impedance, TSSOP-8 | θJA | | 175 | | °C/W | Package thermal impedance (Note 5), TSSOP-8 | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | • Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 • Weight: | 19 |
## CAD (KiCad official)
- Symbol: `LM2904AQTH-13`
- Footprint: `Package_SO:TSSOP-8_4.4x3mm_P0.65mm`
- 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files: `lm2904aqth-13-etched.step` / `lm2904aqth-13-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2904aqth-13.step` / `lm2904aqth-13.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/LM2904AQTH-13.pdf) (20 pp, sha256 `12a3965c03721356`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2904aqth-13-datasheet.pdf)