Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2904AQTH-13

Diodes Incorporated · Operational Amplifier · TSSOP-8

LM2904AQTH-13 from Diodes Incorporated, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Channel 1 output; the output swings from 0V to VCC -1.5V.
2 1IN- input Channel 1 inverting input; input voltages should not go negative by more than -0.3V (@ +25°C), and either input can go to +36V without damage.
3 1IN+ input Channel 1 non-inverting input; the input common-mode voltage range includes ground and either input can go to +36V without damage.
4 GND power_in Ground pin; the supply should be bypassed to this pin with a minimum 0.1µF capacitor placed as close as possible to VCC.
5 2IN+ input Channel 2 non-inverting input; the input common-mode voltage range includes ground and either input can go to +36V without damage.
6 2IN- input Channel 2 inverting input; input voltages should not go negative by more than -0.3V (@ +25°C), and either input can go to +36V without damage.
7 2OUT output Channel 2 output; the output swings from 0V to VCC -1.5V.
8 VCC power_in Chip supply voltage; single supply 2V to 36V or dual supplies ±1V to ±18V per the Recommended Operating Conditions.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package TSSOP-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage (A-Suffix), TA=+25°C VIO 1 2 mV A-Suffix Device, VIC=VCMR min, VO=1.4V, VCC=5V to max, RS=0Ω, TA=+25°C 6
Input Offset Voltage (A-Suffix), Full Range VIO 4 mV A-Suffix Device, Full Range 6
Input Bias Current, TA=+25°C IB -20 -250 nA IIN+ or IIN− with OUT in linear range, VCMR=0V (Note 10), TA=+25°C 6
Input Bias Current, Full Range IB -500 nA IIN+ or IIN− with OUT in linear range, VCMR=0V (Note 10), Full Range 6
Input Offset Current, TA=+25°C IIO 2 50 nA IIN+ − IIN−, VCM=0V, TA=+25°C 6
Input Offset Current, Full Range IIO 150 nA IIN+ − IIN−, VCM=0V, Full Range 6
Input Common-Mode Voltage Range, TA=+25°C VCMR 0 V VCC = 30V (Note 11), TA=+25°C 6
Input Common-Mode Voltage Range, Full Range VCMR 0 V VCC = 30V (Note 11), Full Range 6
Supply Current (Two Amplifiers), VCC=30V ICC 0.7 2 mA VO = 0.5 VCC, No Load, VCC = 30V, Full Range 6
Supply Current (Two Amplifiers), VCC=5V ICC 0.5 1.2 mA VO = 0.5 VCC, No Load, VCC = 5V, Full Range 6
Large Signal Voltage Gain, TA=+25°C AV 25 100 V/mV VCC = 15V, VOUT = 1V to 11V, RL ≥ 2kΩ, TA = +25°C 6
Large Signal Voltage Gain, Full Range AV 15 V/mV VCC = 15V, VOUT = 1V to 11V, RL ≥ 2kΩ, Full Range 6
Common Mode Rejection Ratio CMRR 60 70 dB DC, VCMR = 0V to VCC-1.5V, TA = +25°C 6
Power Supply Rejection Ratio PSRR 70 100 dB VCC = 5V to 30V, TA = +25°C 6
Output Current Sink, VO=200mV ISINK 12 50 µA VIN- = 1V, VIN+ = 0V, VCC = 15V, VO = 200mV, TA = +25°C 6
Output Current Sink, VO=15V, TA=+25°C ISINK 10 20 mA VIN- = 1V, VIN+ = 0V, VCC = 15V, VO = 15V, TA = +25°C 6
Output Current Sink, VO=15V, Full Range ISINK 5 mA VIN- = 1V, VIN+ = 0V, VCC = 15V, VO = 15V, Full Range 6
Output Current Source, TA=+25°C ISOURCE -20 -40 -60 VIN+ = 1V, VIN- = 0V, VCC = 15V, VO = 0V, TA = +25°C 6
Output Current Source, Full Range ISOURCE -10 VIN+ = 1V, VIN- = 0V, VCC = 15V, VO = 0V, Full Range 6
Short-Circuit Current to Ground ISC 40 60 mA VCC = 5V, GND = -5V, VO = 0V, TA = +25°C 6
High-Level Output Voltage Swing, VCC=30V, RL=2kΩ, Full Range VOH 26 V VCC = 30V, RL = 2kΩ, Full Range 6
High-Level Output Voltage Swing, VCC=30V, RL≥10kΩ VOH 27 28 V VCC = 30V, RL ≥ 10kΩ 6
Low-Level Output Voltage Swing, Full Range VOL 5 20 mV RL ≤ 10kΩ, Full Range 6
Single Supply Voltage 2 36 V Single Supply, over operating free-air temperature range 4
Dual Supply Voltage 1 18 V Dual Supply, printed as ±1 to ±18, over operating free-air temperature range 4
Ambient Temperature Range TA -40 125 °C Over operating free-air temperature range 4
Junction Temperature Range TJ -40 125 °C Over operating free-air temperature range 4
Supply Voltage VCC 36 V @TA = +25°C; printed as ±18 or 36 4
Differential Input Voltage VID 36 V @TA = +25°C 4
Input Voltage VIN -0.3 36 V @TA = +25°C 4
Operating Temperature Range TA -40 125 °C @TA = +25°C, unless otherwise specified 4
Operating Junction Temperature TJ 150 °C @TA = +25°C, unless otherwise specified 4
Storage Temperature Range TSTG -65 150 °C @TA = +25°C, unless otherwise specified 4
ESD Human Body Model, TSSOP-8 500 V Human body model, 1.5kΩ in series with 100pF (Note 7) 4
Package Thermal Impedance, TSSOP-8 θJA 175 °C/W Package thermal impedance (Note 5), TSSOP-8 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin • Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 • Weight: 19

CAD (KiCad official)

  • Symbol: LM2904AQTH-13
  • Footprint: Package_SO:TSSOP-8_4.4x3mm_P0.65mm
  • 3D model: TSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm2904aqth-13-etched.step / lm2904aqth-13-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2904aqth-13.step / lm2904aqth-13.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (20 pp, sha256 12a3965c03721356, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF