main
Ray
Publish 0.1.0
8b0179d
LM2903WYDT
STMicroelectronics · Comparators · SO-8
LM2903WYDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output 1 | output | Output of comparator 1, with TTL, DTL, ECL, MOS and CMOS compatible outputs and an output sink current of 6 mA minimum at Vid = -1 V and Vo = 1.5 V. |
| 2 | Inverting input 1 | input | Inverting input of comparator 1, where the input voltage must not go below -0.3 V (or 0.3 V below the negative supply if used) and must not exceed VCC+ or VCC- magnitudes. |
| 3 | Non-inverting input 1 | input | Non-inverting input of comparator 1, whose common-mode range includes the negative rail (0 V to VCC+ -1.5 V over the full temperature range). |
| 4 | VCC- | power_in | Negative supply rail, which is GND for single-supply operation, or the negative supply in dual-supply operation of ±1 V to ±18 V. |
| 5 | Non-inverting input 2 | input | Non-inverting input of comparator 2, whose common-mode range includes the negative rail (0 V to VCC+ -1.5 V over the full temperature range). |
| 6 | Inverting input 2 | input | Inverting input of comparator 2, where the input voltage must not go below -0.3 V (or 0.3 V below the negative supply if used) and must not exceed VCC+ or VCC- magnitudes. |
| 7 | Output 2 | output | Output of comparator 2, with TTL, DTL, ECL, MOS and CMOS compatible outputs and an output sink current of 6 mA minimum at Vid = -1 V and Vo = 1.5 V. |
| 8 | VCC+ | power_in | Positive supply rail, operating from +2 V to +36 V single supply or ±1 V to ±18 V dual supplies. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 36 | V | Printed as ±18 or 36 V | 4 | ||
| Output voltage | Vout | 36 | V | 4 | |||
| Differential input voltage | Vid | -0.3 | V | Printed as VCC- -0.3 to VCC+ +0.3 V; upper bound not numeric | 4 | ||
| Common mode input voltage range | Vicm | 0 | V | Tmin ≤ Tamb ≤ Tmax; upper bound printed as VCC+ -1.5 V and VCC+ -2 V | 4 | ||
| Operating free-air temperature range | Toper | -40 | 125 | °C | 4 | ||
| Maximum junction temperature | Tj | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Thermal resistance junction to ambient | Rthja | 125 | °C/W | SO-8; values typical, four-layer PCB | 4 | ||
| Thermal resistance junction to case | Rthjc | 40 | °C/W | SO-8 | 4 | ||
| ESD human body model | 2000 | V | Human body model (HBM) | 4 | |||
| ESD machine model | 200 | V | Machine model (MM) | 4 | |||
| ESD charged device model | 1500 | V | CDM: charged device model | 4 | |||
| Input offset voltage | Vio | 17 | mV | Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Input offset voltage | Vio | 15 | mV | 5 | |||
| Input offset current | Iio | 5 | 50 | nA | 5 | ||
| Input offset current | Iio | 150 | nA | Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Input bias current | Iib | 25 | 250 | nA | 5 | ||
| Input bias current | Iib | 400 | nA | Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Large signal voltage gain | Avd | 25 | 200 | V/mV | VCC = 15 V, RL = 15 kΩ, Vo = 1 to 11 V | 5 | |
| Supply current (all comparators) | ICC | 0.4 | 1 | mA | VCC = 5 V, no load | 5 | |
| Supply current (all comparators) | ICC | 1 | 2.5 | mA | VCC = 30 V, no load | 5 | |
| Low level output voltage | VOL | 250 | 400 | mV | Vid = -1 V, Isink = 4 mA | 5 | |
| Low level output voltage | VOL | 700 | mV | Tmin ≤ Tamb ≤ Tmax, Vid = -1 V, Isink = 4 mA | 5 | ||
| High level output current | IOH | 0.1 | 1 | nA | VCC = Vo = 30 V, Vid = 1 V | 5 | |
| High level output current | IOH | 1 | µA | Tmin ≤ Tamb ≤ Tmax, VCC = Vo = 30 V, Vid = 1 V | 5 | ||
| Output sink current | Isink | 6 | 16 | mA | Vid = -1 V, Vo = 1.5 V | 5 | |
| Small signal response time | tres | 1.3 | µs | RL = 5.1 kΩ to VCC+ | 5 | ||
| Large signal response time | trel | 500 | ns | TTL input, Vref = +1.4 V, RL = 5.1 kΩ to VCC+, output signal at 50 % of final value | 5 | ||
| Large signal response time | trel | 1 | µs | TTL input, Vref = +1.4 V, RL = 5.1 kΩ to VCC+, output signal at 95 % of final value | 5 |
CAD (KiCad official)
- Symbol:
LM2903WYDT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lm2903wydt-etched.step/lm2903wydt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2903wydt.step/lm2903wydt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (15 pp, sha256
9df19eba1364d326, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2903WYDT
**STMicroelectronics** · Comparators · SO-8
LM2903WYDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output 1 | output | Output of comparator 1, with TTL, DTL, ECL, MOS and CMOS compatible outputs and an output sink current of 6 mA minimum at Vid = -1 V and Vo = 1.5 V. |
| 2 | Inverting input 1 | input | Inverting input of comparator 1, where the input voltage must not go below -0.3 V (or 0.3 V below the negative supply if used) and must not exceed VCC+ or VCC- magnitudes. |
| 3 | Non-inverting input 1 | input | Non-inverting input of comparator 1, whose common-mode range includes the negative rail (0 V to VCC+ -1.5 V over the full temperature range). |
| 4 | VCC- | power_in | Negative supply rail, which is GND for single-supply operation, or the negative supply in dual-supply operation of ±1 V to ±18 V. |
| 5 | Non-inverting input 2 | input | Non-inverting input of comparator 2, whose common-mode range includes the negative rail (0 V to VCC+ -1.5 V over the full temperature range). |
| 6 | Inverting input 2 | input | Inverting input of comparator 2, where the input voltage must not go below -0.3 V (or 0.3 V below the negative supply if used) and must not exceed VCC+ or VCC- magnitudes. |
| 7 | Output 2 | output | Output of comparator 2, with TTL, DTL, ECL, MOS and CMOS compatible outputs and an output sink current of 6 mA minimum at Vid = -1 V and Vo = 1.5 V. |
| 8 | VCC+ | power_in | Positive supply rail, operating from +2 V to +36 V single supply or ±1 V to ±18 V dual supplies. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | | | 36 | V | Printed as ±18 or 36 V | 4 |
| Output voltage | Vout | | | 36 | V | | 4 |
| Differential input voltage | Vid | -0.3 | | | V | Printed as VCC- -0.3 to VCC+ +0.3 V; upper bound not numeric | 4 |
| Common mode input voltage range | Vicm | 0 | | | V | Tmin ≤ Tamb ≤ Tmax; upper bound printed as VCC+ -1.5 V and VCC+ -2 V | 4 |
| Operating free-air temperature range | Toper | -40 | | 125 | °C | | 4 |
| Maximum junction temperature | Tj | | | 150 | °C | | 4 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 4 |
| Thermal resistance junction to ambient | Rthja | | 125 | | °C/W | SO-8; values typical, four-layer PCB | 4 |
| Thermal resistance junction to case | Rthjc | | 40 | | °C/W | SO-8 | 4 |
| ESD human body model | | | | 2000 | V | Human body model (HBM) | 4 |
| ESD machine model | | | | 200 | V | Machine model (MM) | 4 |
| ESD charged device model | | | | 1500 | V | CDM: charged device model | 4 |
| Input offset voltage | Vio | | | 17 | mV | Tmin ≤ Tamb ≤ Tmax | 5 |
| Input offset voltage | Vio | | | 15 | mV | | 5 |
| Input offset current | Iio | | 5 | 50 | nA | | 5 |
| Input offset current | Iio | | | 150 | nA | Tmin ≤ Tamb ≤ Tmax | 5 |
| Input bias current | Iib | | 25 | 250 | nA | | 5 |
| Input bias current | Iib | | | 400 | nA | Tmin ≤ Tamb ≤ Tmax | 5 |
| Large signal voltage gain | Avd | 25 | 200 | | V/mV | VCC = 15 V, RL = 15 kΩ, Vo = 1 to 11 V | 5 |
| Supply current (all comparators) | ICC | | 0.4 | 1 | mA | VCC = 5 V, no load | 5 |
| Supply current (all comparators) | ICC | | 1 | 2.5 | mA | VCC = 30 V, no load | 5 |
| Low level output voltage | VOL | | 250 | 400 | mV | Vid = -1 V, Isink = 4 mA | 5 |
| Low level output voltage | VOL | | | 700 | mV | Tmin ≤ Tamb ≤ Tmax, Vid = -1 V, Isink = 4 mA | 5 |
| High level output current | IOH | | 0.1 | 1 | nA | VCC = Vo = 30 V, Vid = 1 V | 5 |
| High level output current | IOH | | | 1 | µA | Tmin ≤ Tamb ≤ Tmax, VCC = Vo = 30 V, Vid = 1 V | 5 |
| Output sink current | Isink | 6 | 16 | | mA | Vid = -1 V, Vo = 1.5 V | 5 |
| Small signal response time | tres | | 1.3 | | µs | RL = 5.1 kΩ to VCC+ | 5 |
| Large signal response time | trel | | 500 | | ns | TTL input, Vref = +1.4 V, RL = 5.1 kΩ to VCC+, output signal at 50 % of final value | 5 |
| Large signal response time | trel | | 1 | | µs | TTL input, Vref = +1.4 V, RL = 5.1 kΩ to VCC+, output signal at 95 % of final value | 5 |
## CAD (KiCad official)
- Symbol: `LM2903WYDT`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `lm2903wydt-etched.step` / `lm2903wydt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2903wydt.step` / `lm2903wydt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/lm2903wydt.pdf) (15 pp, sha256 `9df19eba1364d326`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2903wydt-datasheet.pdf)