main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm2903wydt: viewers · Ray
lm2903wydt-etched.glb Publish 0.1.0 · Ray
lm2903wydt-etched.step lm2903wydt: factory component page (tier=mfr) · Ray
lm2903wydt-hero.glb lm2903wydt: hero GLB from the etched model (keeps the MPN mark) · Ray
lm2903wydt-hero.overlay.json Publish 0.1.0 · Ray
lm2903wydt.glb Publish 0.1.0 · Ray
lm2903wydt.kicad_mod Publish 0.1.0 · Ray
lm2903wydt.kicad_sym Publish 0.1.0 · Ray
lm2903wydt.lbr Publish 0.1.0 · Ray
lm2903wydt.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

LM2903WYDT

STMicroelectronics · Comparators · SO-8

LM2903WYDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Output 1 output Output of comparator 1, with TTL, DTL, ECL, MOS and CMOS compatible outputs and an output sink current of 6 mA minimum at Vid = -1 V and Vo = 1.5 V.
2 Inverting input 1 input Inverting input of comparator 1, where the input voltage must not go below -0.3 V (or 0.3 V below the negative supply if used) and must not exceed VCC+ or VCC- magnitudes.
3 Non-inverting input 1 input Non-inverting input of comparator 1, whose common-mode range includes the negative rail (0 V to VCC+ -1.5 V over the full temperature range).
4 VCC- power_in Negative supply rail, which is GND for single-supply operation, or the negative supply in dual-supply operation of ±1 V to ±18 V.
5 Non-inverting input 2 input Non-inverting input of comparator 2, whose common-mode range includes the negative rail (0 V to VCC+ -1.5 V over the full temperature range).
6 Inverting input 2 input Inverting input of comparator 2, where the input voltage must not go below -0.3 V (or 0.3 V below the negative supply if used) and must not exceed VCC+ or VCC- magnitudes.
7 Output 2 output Output of comparator 2, with TTL, DTL, ECL, MOS and CMOS compatible outputs and an output sink current of 6 mA minimum at Vid = -1 V and Vo = 1.5 V.
8 VCC+ power_in Positive supply rail, operating from +2 V to +36 V single supply or ±1 V to ±18 V dual supplies.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 36 V Printed as ±18 or 36 V 4
Output voltage Vout 36 V 4
Differential input voltage Vid -0.3 V Printed as VCC- -0.3 to VCC+ +0.3 V; upper bound not numeric 4
Common mode input voltage range Vicm 0 V Tmin ≤ Tamb ≤ Tmax; upper bound printed as VCC+ -1.5 V and VCC+ -2 V 4
Operating free-air temperature range Toper -40 125 °C 4
Maximum junction temperature Tj 150 °C 4
Storage temperature range Tstg -65 150 °C 4
Thermal resistance junction to ambient Rthja 125 °C/W SO-8; values typical, four-layer PCB 4
Thermal resistance junction to case Rthjc 40 °C/W SO-8 4
ESD human body model 2000 V Human body model (HBM) 4
ESD machine model 200 V Machine model (MM) 4
ESD charged device model 1500 V CDM: charged device model 4
Input offset voltage Vio 17 mV Tmin ≤ Tamb ≤ Tmax 5
Input offset voltage Vio 15 mV 5
Input offset current Iio 5 50 nA 5
Input offset current Iio 150 nA Tmin ≤ Tamb ≤ Tmax 5
Input bias current Iib 25 250 nA 5
Input bias current Iib 400 nA Tmin ≤ Tamb ≤ Tmax 5
Large signal voltage gain Avd 25 200 V/mV VCC = 15 V, RL = 15 kΩ, Vo = 1 to 11 V 5
Supply current (all comparators) ICC 0.4 1 mA VCC = 5 V, no load 5
Supply current (all comparators) ICC 1 2.5 mA VCC = 30 V, no load 5
Low level output voltage VOL 250 400 mV Vid = -1 V, Isink = 4 mA 5
Low level output voltage VOL 700 mV Tmin ≤ Tamb ≤ Tmax, Vid = -1 V, Isink = 4 mA 5
High level output current IOH 0.1 1 nA VCC = Vo = 30 V, Vid = 1 V 5
High level output current IOH 1 µA Tmin ≤ Tamb ≤ Tmax, VCC = Vo = 30 V, Vid = 1 V 5
Output sink current Isink 6 16 mA Vid = -1 V, Vo = 1.5 V 5
Small signal response time tres 1.3 µs RL = 5.1 kΩ to VCC+ 5
Large signal response time trel 500 ns TTL input, Vref = +1.4 V, RL = 5.1 kΩ to VCC+, output signal at 50 % of final value 5
Large signal response time trel 1 µs TTL input, Vref = +1.4 V, RL = 5.1 kΩ to VCC+, output signal at 95 % of final value 5

CAD (KiCad official)

  • Symbol: LM2903WYDT
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lm2903wydt-etched.step / lm2903wydt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2903wydt.step / lm2903wydt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (15 pp, sha256 9df19eba1364d326, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF