main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm2903l-q1: viewers · Ray
lm2903l-q1-etched.glb Publish 0.1.0 · Ray
lm2903l-q1-etched.step lm2903l-q1: factory component page (tier=mfr) · Ray
lm2903l-q1-hero.glb lm2903l-q1: hero GLB from the etched model (keeps the MPN mark) · Ray
lm2903l-q1-hero.overlay.json Publish 0.1.0 · Ray
lm2903l-q1.glb Publish 0.1.0 · Ray
lm2903l-q1.kicad_mod Publish 0.1.0 · Ray
lm2903l-q1.kicad_sym Publish 0.1.0 · Ray
lm2903l-q1.lbr Publish 0.1.0 · Ray
lm2903l-q1.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md lm2903l-q1: CAD wording names the Adom_Gen land, not KiCad official · Ray
verification.json Verified: Published by the parts factory: tier mfr, 10 pins · Ray

LM2903L-Q1

Texas Instruments · IC · X2QFN-10 (RUG)

LM2903L-Q1 from Texas Instruments, in a X2QFN-10 (RUG). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 V- power_in Negative supply voltage; the supply range is 2.7V to 36V across (V+) minus (V-).
2 CLR A input Clear input for comparator A that clears the latch on a falling edge, with inputs rated from -0.1V to 36V relative to (V-).
3 CLR B input Clear input for comparator B that clears the latch on a falling edge, with inputs rated from -0.1V to 36V relative to (V-).
4 IN+ B input Non-inverting input of comparator B, with common-mode range from (V-) to (V+) minus 2V.
5 IN- B input Inverting input of comparator B, with common-mode range from (V-) to (V+) minus 2V.
6 V+ power_in Positive supply voltage; the supply range is 2.7V to 36V across (V+) minus (V-).
7 OUT B output Output of comparator B, an open-drain output with an output voltage range of 0 to 36V from (V-).
8 OUT A output Output of comparator A, an open-drain output with an output voltage range of 0 to 36V from (V-).
9 IN- A input Inverting input of comparator A, with common-mode range from (V-) to (V+) minus 2V.
10 IN+ A input Non-inverting input of comparator A, with common-mode range from (V-) to (V+) minus 2V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package X2QFN-10 (RUG)
Category
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS 2.7 36 V VS = (V+) - (V-) 5
Input voltage range (IN+, IN-, CLR) -0.1 36 V from (V-) 5
Output voltage range 0 36 V from (V-) 5
Ambient temperature TA -40 125 °C 5
Supply voltage VS -0.3 38 V VS = (V+), (V-) 5
Input pins (IN+, IN-, CLR) -0.3 38 V from (V-) 5
Output (OUT) -0.3 38 V from (V-) 5
Junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Input threshold voltage VT -2.5 0.3 2.5 mV VS = 5 to 36V 7
Input threshold voltage VT -3 3 mV VS = 5 to 36V, TA = -40°C to +125°C 7
Quiescent current per comparator IQ 250 400 µA VS = 5V, No Load, Output Low 7
Quiescent current per comparator IQ 600 µA VS = 36V, No Load, Output Low, TA = -40°C to +125°C 7
Input bias current IB -3.5 -25 nA 7
Input bias current IB -50 nA TA = -40°C to +125°C 7
Input offset current IOS -10 0.5 10 nA 7
Input offset current IOS -25 25 nA TA = -40°C to +125°C 7
Voltage input high threshold of CLR VIH_CLR 1.1 V 7
Voltage input low threshold of CLR VIL_CLR 0.6 V 7
Large signal differential voltage amplification AVD 50 200 V/mV VS = 15V, VO = 1.4V to 11.4V; RL ≥ 15k to (V+) 7
Voltage swing from (V-) VOL 110 400 mV ISINK ≤ 4mA, VID = -1V 7
Voltage swing from (V-) VOL 550 mV ISINK ≤ 4mA, VID = -1V, TA = -40°C to +125°C 7
Open-drain output leakage current ILKG 0.1 20 nA (V+) = VO = 5V; VID = 1V 7
Open-drain output leakage current ILKG 0.3 50 nA (V+) = VO = 36V; VID = 1V 7
Low Level Output Current IOL 6 21 mA VOL = 1.5V; VID = -1V; VS = 5V 7
Propagation delay time, high-to-low (TTL input) TPD-HL 300 ns Delay from mid-point of input to mid-point of output, RP = 5.1kΩ 8
Propagation delay time, high-to-low (input overdrive 5mV) TPD-HL 1000 ns Input overdrive = 5mV, Input step = 100mV from mid-point of input to mid-point of output, RP = 5.1kΩ 8
Clear Fall to Latch Reset propagation delay time TPD-CLR-F 650 ns CLR = 1.8V to 5V, VID = 100mV, RP = 5.1kΩ 8
Minimum Clear Hold Pulse time CLR_Min_Pulse_Width 70 ns CLR = 1.8V to 5V, VID= +100 mV 8
5V Output Fall Time, 80% to 20% TFALL 20 ns VID = -100mV 8
Junction-to-ambient thermal resistance RqJA 150 °C/W RUG (X2QFN) package 6
Junction-to-case (top) thermal resistance RqJC(top) 58 °C/W RUG (X2QFN) package 6
Junction-to-board thermal resistance RqJB 78 °C/W RUG (X2QFN) package 6
Junction-to-top characterization parameter yJT 1.3 °C/W RUG (X2QFN) package 6
Junction-to-board characterization parameter yJB 78 °C/W RUG (X2QFN) package 6

CAD (Adom-generated)

  • Symbol: LM2903L-Q1
  • Footprint: Adom_Gen:Texas_Instruments_LM2903
  • 3D model: generated to fit the land (STEP)
  • 3D model files: lm2903l-q1-etched.step / lm2903l-q1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2903l-q1.step / lm2903l-q1.glb are the bare package body.

Provenance

TI lists LM2903L-Q1 as Preview (not orderable at distributors yet): TI product page. This page was built from the manufacturer datasheet.

Land pattern: LM2903L-Q1's datasheet (SLVSL49, Advance Information) shows the RUG package only as TI's generic view. The footprint follows TI's own RUG0010A drawing for the same X2QFN-10 package, from the TLV9002 datasheet (package outline 4231745/B). TI also publishes a RUG0010B revision whose pads differ by about 0.05 mm; TI's pages do not say which one LM2903L-Q1 uses. Check against the final datasheet when TI releases it.

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (25 pp, sha256 c13f5e25c882aa85, retrieved 2026-11-04, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF