Generated by adom_assets · KiCad file format 20240108
LM2903AVQPWRQ1
Texas Instruments · Comparators · TSSOP-8 (PW)
LM2903AVQPWRQ1 from Texas Instruments, in a TSSOP-8 (PW). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output pin of comparator 1. |
| 2 | 1IN- | input | Negative input pin of comparator 1. |
| 3 | 1IN+ | input | Positive input pin of comparator 1. |
| 4 | GND | power_in | Ground. |
| 5 | 2IN+ | input | Positive input pin of comparator 2. |
| 6 | 2IN- | input | Negative input pin of comparator 2. |
| 7 | 2OUT | output | Output pin of comparator 2. |
| 8 | VCC | power_in | Positive supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-8 (PW) |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage, A-suffix devices, 25°C | VIO | 1 | 2 | mV | VO = 1.4V, VIC = VIC(min), VCC = 5V to MAX | 7 | |
| Input offset voltage, A-suffix devices, full range | VIO | 4 | mV | Full range | 7 | ||
| Input offset current, 25°C | IIO | 5 | 50 | nA | VO = 1.4V | 7 | |
| Input offset current, full range | IIO | 200 | nA | Full range, VO = 1.4V | 7 | ||
| Input bias current, 25°C | IIB | -25 | -250 | nA | VO = 1.4V | 7 | |
| Input bias current, full range | IIB | -500 | nA | Full range, VO = 1.4V | 7 | ||
| Common-mode input voltage range, 25°C (min 0; upper limit printed as VCC−1.5 V) | VICR | 0 | V | 25°C | 7 | ||
| Common-mode input voltage range, full range (min 0; upper limit printed as VCC−2 V) | VICR | 0 | V | Full range | 7 | ||
| Large-signal differential voltage amplification, 25°C | AVD | 25 | 100 | V/mV | VCC = 15V, VO = 1.4V to 11.4V, RL ≥ 15kΩ to VCC | 7 | |
| High-level output current, 25°C | IOH | 0.1 | 50 | nA | VOH = 5V, VID = 1V | 7 | |
| High-level output current, full range | IOH | 1 | µA | VOH = VCC MAX | 7 | ||
| Low-level output voltage, 25°C | VOL | 150 | 400 | mV | IOL = 4mA, VID = −1V | 7 | |
| Low-level output voltage, full range | VOL | 700 | mV | IOL = 4mA, VID = −1V | 7 | ||
| Low-level output current, 25°C | IOL | 6 | mA | VOL = 1.5V, VID = −1V | 7 | ||
| Supply current, 25°C | ICC | 0.8 | 1 | mA | RL = ∞, VCC = 5V | 7 | |
| Supply current, full range | ICC | 2.5 | mA | RL = ∞, VCC = MAX | 7 | ||
| Recommended supply voltage VCC (V devices) | VCC | 2 | 32 | V | Over operating free-air temperature range | 5 | |
| Junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Supply voltage VCC | VCC | 36 | V | LM2903-Q1 (all voltages referenced to GND) | 4 | ||
| Differential input voltage | VID | -36 | 36 | V | Differential voltages at IN+ with respect to IN− | 4 | |
| Input voltage range (either input) | VI | -0.3 | 36 | V | 4 | ||
| Output voltage | VO | 36 | V | 4 | |||
| Output current | IO | 20 | mA | 4 | |||
| Operating virtual-junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | LM2903-Q1 only | 4 | |
| Electrostatic discharge, human body model | V(ESD) HBM | -1000 | 1000 | V | Per AEC Q100-002 | 4 | |
| Electrostatic discharge, charged device model | V(ESD) CDM | -750 | 750 | V | Per AEC Q100-011, all pins | 4 | |
| Junction-to-ambient thermal resistance (PW TSSOP) | RθJA | 182.9 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (PW TSSOP) | RθJC(top) | 87.1 | °C/W | 5 | |||
| Junction-to-board thermal resistance (PW TSSOP) | RθJB | 123.2 | °C/W | 5 |
CAD (Adom-generated)
- Symbol:
LM2903AVQPWRQ1 - Footprint:
Adom_Gen:Texas_Instruments_PW0008A - 3D model: generated to fit the land (STEP)
- 3D model files:
lm2903avqpwrq1-etched.step/lm2903avqpwrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2903avqpwrq1.step/lm2903avqpwrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
765b5f97d419335c, retrieved 2026-11-21) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: PW0008A 4221848/A land pattern, ZHCSIA9M p.45: 1.5 x 0.45 mm pads, pitch 0.65 mm, pad rows 5.8 mm centre-to-centre. Body from the outline p.44: 3.1/2.9 x 4.5/4.3 body, 6.6/6.2 across the leads, 1.2 MAX, 0.15/0.05 standoff, 8X 0.30/0.19 leads, 6X 0.65 pitch. Shared land Adom_Gen:Texas_Instruments_PW0008A (TI PW0008A EXAMPLE BOARD LAYOUT 4221848/A, ADS1202 SBAS275B p.24). Task master ruling 2026-11-21: TSSOP/SSOP on the lands drawn and sampled (FAMWAVES samples + renders approved).