Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2903AVQPWRQ1

Texas Instruments · Comparators · TSSOP-8 (PW)

LM2903AVQPWRQ1 from Texas Instruments, in a TSSOP-8 (PW). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1OUT output Output pin of comparator 1.
2 1IN- input Negative input pin of comparator 1.
3 1IN+ input Positive input pin of comparator 1.
4 GND power_in Ground.
5 2IN+ input Positive input pin of comparator 2.
6 2IN- input Negative input pin of comparator 2.
7 2OUT output Output pin of comparator 2.
8 VCC power_in Positive supply voltage.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-8 (PW)
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage, A-suffix devices, 25°C VIO 1 2 mV VO = 1.4V, VIC = VIC(min), VCC = 5V to MAX 7
Input offset voltage, A-suffix devices, full range VIO 4 mV Full range 7
Input offset current, 25°C IIO 5 50 nA VO = 1.4V 7
Input offset current, full range IIO 200 nA Full range, VO = 1.4V 7
Input bias current, 25°C IIB -25 -250 nA VO = 1.4V 7
Input bias current, full range IIB -500 nA Full range, VO = 1.4V 7
Common-mode input voltage range, 25°C (min 0; upper limit printed as VCC−1.5 V) VICR 0 V 25°C 7
Common-mode input voltage range, full range (min 0; upper limit printed as VCC−2 V) VICR 0 V Full range 7
Large-signal differential voltage amplification, 25°C AVD 25 100 V/mV VCC = 15V, VO = 1.4V to 11.4V, RL ≥ 15kΩ to VCC 7
High-level output current, 25°C IOH 0.1 50 nA VOH = 5V, VID = 1V 7
High-level output current, full range IOH 1 µA VOH = VCC MAX 7
Low-level output voltage, 25°C VOL 150 400 mV IOL = 4mA, VID = −1V 7
Low-level output voltage, full range VOL 700 mV IOL = 4mA, VID = −1V 7
Low-level output current, 25°C IOL 6 mA VOL = 1.5V, VID = −1V 7
Supply current, 25°C ICC 0.8 1 mA RL = ∞, VCC = 5V 7
Supply current, full range ICC 2.5 mA RL = ∞, VCC = MAX 7
Recommended supply voltage VCC (V devices) VCC 2 32 V Over operating free-air temperature range 5
Junction temperature TJ -40 125 °C 5
Supply voltage VCC VCC 36 V LM2903-Q1 (all voltages referenced to GND) 4
Differential input voltage VID -36 36 V Differential voltages at IN+ with respect to IN− 4
Input voltage range (either input) VI -0.3 36 V 4
Output voltage VO 36 V 4
Output current IO 20 mA 4
Operating virtual-junction temperature TJ 150 °C 4
Storage temperature range Tstg -65 150 °C LM2903-Q1 only 4
Electrostatic discharge, human body model V(ESD) HBM -1000 1000 V Per AEC Q100-002 4
Electrostatic discharge, charged device model V(ESD) CDM -750 750 V Per AEC Q100-011, all pins 4
Junction-to-ambient thermal resistance (PW TSSOP) RθJA 182.9 °C/W 5
Junction-to-case (top) thermal resistance (PW TSSOP) RθJC(top) 87.1 °C/W 5
Junction-to-board thermal resistance (PW TSSOP) RθJB 123.2 °C/W 5

CAD (Adom-generated)

  • Symbol: LM2903AVQPWRQ1
  • Footprint: Adom_Gen:Texas_Instruments_PW0008A
  • 3D model: generated to fit the land (STEP)
  • 3D model files: lm2903avqpwrq1-etched.step / lm2903avqpwrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2903avqpwrq1.step / lm2903avqpwrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 765b5f97d419335c, retrieved 2026-11-21)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: PW0008A 4221848/A land pattern, ZHCSIA9M p.45: 1.5 x 0.45 mm pads, pitch 0.65 mm, pad rows 5.8 mm centre-to-centre. Body from the outline p.44: 3.1/2.9 x 4.5/4.3 body, 6.6/6.2 across the leads, 1.2 MAX, 0.15/0.05 standoff, 8X 0.30/0.19 leads, 6X 0.65 pitch. Shared land Adom_Gen:Texas_Instruments_PW0008A (TI PW0008A EXAMPLE BOARD LAYOUT 4221848/A, ADS1202 SBAS275B p.24). Task master ruling 2026-11-21: TSSOP/SSOP on the lands drawn and sampled (FAMWAVES samples + renders approved).

Datasheet PDF