main
Ray
lm2902m: specified limits as data (metadata.characteristics, 40 rows from the datasheet)
fc13ec8
LM2902M
HGSEMI · Operational Amplifier · SOP-14
LM2902M from HGSEMI, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of amplifier 1. Push-pull output; short-circuit current ~40 mA at VCC = +15V. |
| 2 | IN1- | input | Inverting input of amplifier 1. Input bias current typ. 20 nA; common-mode range includes ground. |
| 3 | IN1+ | input | Non-inverting input of amplifier 1. Input common-mode range 0V to VCC−1.5V. |
| 4 | VCC+ | power_in | Positive supply. Single supply +3V to +30V, or split supply +1.5V to +15V. Absolute max ±16 to 32V. |
| 5 | IN2+ | input | Non-inverting input of amplifier 2. |
| 6 | IN2- | input | Inverting input of amplifier 2. |
| 7 | OUT2 | output | Output of amplifier 2. |
| 8 | OUT3 | output | Output of amplifier 3. |
| 9 | IN3- | input | Inverting input of amplifier 3. |
| 10 | IN3+ | input | Non-inverting input of amplifier 3. |
| 11 | VCC- | power_in | Negative supply / ground. Tied to GND for single-supply operation, or to negative rail for split-supply. |
| 12 | IN4+ | input | Non-inverting input of amplifier 4. |
| 13 | IN4- | input | Inverting input of amplifier 4. |
| 14 | OUT4 | output | Output of amplifier 4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-14 |
| Category | Op-amp/Cmp |
| Pins | 14 |
Ordering variants
Same part, different packaging or reel option.
LM2902MM/TRLM2902MNLM2902MMT/TRLM2902MLQ/TR
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | Vio | 2 | 7 | mV | Tamb = +25°C; VCC+=5V, VO=1.4V | 4 | |
| Input Offset Voltage | Vio | 9 | mV | Tmin ≤ Tamb ≤ Tmax; VCC+=5V, VO=1.4V | 4 | ||
| Input Offset Current | Iio | 2 | 30 | nA | Tamb = +25°C; VCC+=5V, VO=1.4V | 4 | |
| Input Offset Current | Iio | 40 | nA | Tmin ≤ Tamb ≤ Tmax; VCC+=5V, VO=1.4V | 4 | ||
| Input Bias Current | Iib | 20 | 150 | nA | Tamb = +25°C; VCC+=5V, VO=1.4V | 4 | |
| Input Bias Current | Iib | 300 | nA | Tmin ≤ Tamb ≤ Tmax; VCC+=5V, VO=1.4V | 4 | ||
| Large Signal Voltage Gain | Avd | 50 | 100 | V/mV | Tamb = +25°C; VCC+=+15V, RL=2kΩ, VO=1.4V to 11.4V | 4 | |
| Large Signal Voltage Gain | Avd | 25 | V/mV | Tmin ≤ Tamb ≤ Tmax; VCC+=+15V, RL=2kΩ, VO=1.4V to 11.4V | 4 | ||
| Supply Voltage Rejection Ratio | SVR | 65 | 110 | dB | Tamb = +25°C; RS ≤ 10kΩ | 4 | |
| Supply Voltage Rejection Ratio | SVR | 65 | dB | Tmin ≤ Tamb ≤ Tmax; RS ≤ 10kΩ | 4 | ||
| Supply Current, all Amp, no load | Icc | 0.7 | 1.5 | mA | Tamb = +25°C; VCC = +5V | 4 | |
| Supply Current, all Amp, no load | Icc | 0.8 | 1.5 | mA | Tamb = +25°C; VCC = +30V | 4 | |
| Supply Current, all Amp, no load | Icc | 1.2 | 3 | mA | Tmin ≤ Tamb ≤ Tmax; VCC = +5V | 4 | |
| Input Common Mode Voltage Range | Vicm | 0 | V | Tamb = +25°C; VCC = +30V; printed max VCC -1.5 V (not numeric) | 4 | ||
| Common-mode Rejection Ratio | CMR | 70 | 80 | dB | Tamb = +25°C; RS ≤ 10kΩ | 4 | |
| Common-mode Rejection Ratio | CMR | 60 | dB | Tmin ≤ Tamb ≤ Tmax; RS ≤ 10kΩ | 4 | ||
| Output Short-circuit Current | IO | 20 | 40 | 70 | mA | VCC = +15V, Vo = +2V; Vid = +1V | 4 |
| Output Sink Current | Isink | 10 | 20 | mA | VCC = +15V, Vo = +2V; Vid = -1V | 4 | |
| Output Sink Current | Isink | 12 | 50 | µA | VCC = +15V, Vo = +0.2V; Vid = -1V | 4 | |
| High Level Output Voltage | VOH | 26 | V | Tamb = +25°C; VCC = +30V, RL = 2kΩ | 4 | ||
| High Level Output Voltage | VOH | 27 | V | Tamb = +25°C; VCC = +30V, RL = 10kΩ | 4 | ||
| Low Level Output Voltage | VOL | 5 | 20 | mV | Tamb = +25°C; RL = 10kΩ | 4 | |
| Low Level Output Voltage | VOL | 20 | mV | Tmin ≤ Tamb ≤ Tmax; RL = 10kΩ | 4 | ||
| Input Offset Voltage Drift | DVio | 7 | 30 | µV/°C | 5 | ||
| Input Offset Current Drift | DIio | 10 | 200 | pA/°C | 5 | ||
| Slew Rate | SR | 0.4 | V/µs | VCC = 15V, Vi = 0.5 to 3V, RL = 2kΩ, CL = 100pF, unity gain | 4 | ||
| Gain Bandwidth Product | GBP | 1.3 | MHz | VCC = 30V, Vin = 10mV, RL = 2kΩ, CL = 100pF | 5 | ||
| Total Harmonic Distortion | THD | 0.015 | % | f = 1kHz, AV = 20dB, RL = 2kΩ, Vo = 2Vpp, CL = 100pF, VCC = 30V | 5 | ||
| Equivalent Input Noise Voltage | en | 40 | nV/√Hz | f = 1kHz, RS = 100Ω, VCC = 30V | 5 | ||
| Channel Separation | VO1/VO2 | 120 | dB | 1kHz ≤ f ≤ 20kHz | 5 | ||
| Supply Voltage (single supply) | VCC | 3 | 30 | V | Single supply (Features list) | 1 | |
| Supply Voltage (dual supplies) | VCC | 1.5 | 15 | V | Dual supplies, ±1.5V to ±15V as printed in Features | 1 | |
| Supply Voltage | VCC | 32 | V | Printed as ±16 to 32 V | 3 | ||
| Differential Input Voltage | Vid | 32 | V | 3 | |||
| Input Voltage | VI | -0.3 | 32 | V | 3 | ||
| Power Dissipation | ptot | 400 | mW | D Suffix (assumed to be the SOP-14 package; not mapped explicitly in text) | 3 | ||
| Input Current | Iin | 50 | mA | Note 3: only when input driven negative | 3 | ||
| Operating Free-Air Temperature Range | Toper | -40 | 85 | °C | 3 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 3 | ||
| Lead Temperature (Soldering) | TL | 260 | °C | 10 seconds | 3 |
CAD (KiCad official)
- Symbol:
LM2902M - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14 (KiCad packages3D, STEP)
- 3D model files:
lm2902m-etched.step/lm2902m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2902m.step/lm2902m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (13 pp, sha256
6283ee242151e579, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2902M
**HGSEMI** · Operational Amplifier · SOP-14
LM2902M from HGSEMI, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of amplifier 1. Push-pull output; short-circuit current ~40 mA at VCC = +15V. |
| 2 | IN1- | input | Inverting input of amplifier 1. Input bias current typ. 20 nA; common-mode range includes ground. |
| 3 | IN1+ | input | Non-inverting input of amplifier 1. Input common-mode range 0V to VCC−1.5V. |
| 4 | VCC+ | power_in | Positive supply. Single supply +3V to +30V, or split supply +1.5V to +15V. Absolute max ±16 to 32V. |
| 5 | IN2+ | input | Non-inverting input of amplifier 2. |
| 6 | IN2- | input | Inverting input of amplifier 2. |
| 7 | OUT2 | output | Output of amplifier 2. |
| 8 | OUT3 | output | Output of amplifier 3. |
| 9 | IN3- | input | Inverting input of amplifier 3. |
| 10 | IN3+ | input | Non-inverting input of amplifier 3. |
| 11 | VCC- | power_in | Negative supply / ground. Tied to GND for single-supply operation, or to negative rail for split-supply. |
| 12 | IN4+ | input | Non-inverting input of amplifier 4. |
| 13 | IN4- | input | Inverting input of amplifier 4. |
| 14 | OUT4 | output | Output of amplifier 4. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-14 |
| Category | Op-amp/Cmp |
| Pins | 14 |
## Ordering variants
Same part, different packaging or reel option.
- `LM2902MM/TR`
- `LM2902MN`
- `LM2902MMT/TR`
- `LM2902MLQ/TR`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | Vio | | 2 | 7 | mV | Tamb = +25°C; VCC+=5V, VO=1.4V | 4 |
| Input Offset Voltage | Vio | | | 9 | mV | Tmin ≤ Tamb ≤ Tmax; VCC+=5V, VO=1.4V | 4 |
| Input Offset Current | Iio | | 2 | 30 | nA | Tamb = +25°C; VCC+=5V, VO=1.4V | 4 |
| Input Offset Current | Iio | | | 40 | nA | Tmin ≤ Tamb ≤ Tmax; VCC+=5V, VO=1.4V | 4 |
| Input Bias Current | Iib | | 20 | 150 | nA | Tamb = +25°C; VCC+=5V, VO=1.4V | 4 |
| Input Bias Current | Iib | | | 300 | nA | Tmin ≤ Tamb ≤ Tmax; VCC+=5V, VO=1.4V | 4 |
| Large Signal Voltage Gain | Avd | 50 | 100 | | V/mV | Tamb = +25°C; VCC+=+15V, RL=2kΩ, VO=1.4V to 11.4V | 4 |
| Large Signal Voltage Gain | Avd | 25 | | | V/mV | Tmin ≤ Tamb ≤ Tmax; VCC+=+15V, RL=2kΩ, VO=1.4V to 11.4V | 4 |
| Supply Voltage Rejection Ratio | SVR | 65 | 110 | | dB | Tamb = +25°C; RS ≤ 10kΩ | 4 |
| Supply Voltage Rejection Ratio | SVR | 65 | | | dB | Tmin ≤ Tamb ≤ Tmax; RS ≤ 10kΩ | 4 |
| Supply Current, all Amp, no load | Icc | | 0.7 | 1.5 | mA | Tamb = +25°C; VCC = +5V | 4 |
| Supply Current, all Amp, no load | Icc | | 0.8 | 1.5 | mA | Tamb = +25°C; VCC = +30V | 4 |
| Supply Current, all Amp, no load | Icc | | 1.2 | 3 | mA | Tmin ≤ Tamb ≤ Tmax; VCC = +5V | 4 |
| Input Common Mode Voltage Range | Vicm | 0 | | | V | Tamb = +25°C; VCC = +30V; printed max VCC -1.5 V (not numeric) | 4 |
| Common-mode Rejection Ratio | CMR | 70 | 80 | | dB | Tamb = +25°C; RS ≤ 10kΩ | 4 |
| Common-mode Rejection Ratio | CMR | 60 | | | dB | Tmin ≤ Tamb ≤ Tmax; RS ≤ 10kΩ | 4 |
| Output Short-circuit Current | IO | 20 | 40 | 70 | mA | VCC = +15V, Vo = +2V; Vid = +1V | 4 |
| Output Sink Current | Isink | 10 | 20 | | mA | VCC = +15V, Vo = +2V; Vid = -1V | 4 |
| Output Sink Current | Isink | 12 | 50 | | µA | VCC = +15V, Vo = +0.2V; Vid = -1V | 4 |
| High Level Output Voltage | VOH | 26 | | | V | Tamb = +25°C; VCC = +30V, RL = 2kΩ | 4 |
| High Level Output Voltage | VOH | 27 | | | V | Tamb = +25°C; VCC = +30V, RL = 10kΩ | 4 |
| Low Level Output Voltage | VOL | | 5 | 20 | mV | Tamb = +25°C; RL = 10kΩ | 4 |
| Low Level Output Voltage | VOL | | | 20 | mV | Tmin ≤ Tamb ≤ Tmax; RL = 10kΩ | 4 |
| Input Offset Voltage Drift | DVio | | 7 | 30 | µV/°C | | 5 |
| Input Offset Current Drift | DIio | | 10 | 200 | pA/°C | | 5 |
| Slew Rate | SR | | 0.4 | | V/µs | VCC = 15V, Vi = 0.5 to 3V, RL = 2kΩ, CL = 100pF, unity gain | 4 |
| Gain Bandwidth Product | GBP | | 1.3 | | MHz | VCC = 30V, Vin = 10mV, RL = 2kΩ, CL = 100pF | 5 |
| Total Harmonic Distortion | THD | | 0.015 | | % | f = 1kHz, AV = 20dB, RL = 2kΩ, Vo = 2Vpp, CL = 100pF, VCC = 30V | 5 |
| Equivalent Input Noise Voltage | en | | 40 | | nV/√Hz | f = 1kHz, RS = 100Ω, VCC = 30V | 5 |
| Channel Separation | VO1/VO2 | | 120 | | dB | 1kHz ≤ f ≤ 20kHz | 5 |
| Supply Voltage (single supply) | VCC | 3 | | 30 | V | Single supply (Features list) | 1 |
| Supply Voltage (dual supplies) | VCC | 1.5 | | 15 | V | Dual supplies, ±1.5V to ±15V as printed in Features | 1 |
| Supply Voltage | VCC | | | 32 | V | Printed as ±16 to 32 V | 3 |
| Differential Input Voltage | Vid | | | 32 | V | | 3 |
| Input Voltage | VI | -0.3 | | 32 | V | | 3 |
| Power Dissipation | ptot | | | 400 | mW | D Suffix (assumed to be the SOP-14 package; not mapped explicitly in text) | 3 |
| Input Current | Iin | | | 50 | mA | Note 3: only when input driven negative | 3 |
| Operating Free-Air Temperature Range | Toper | -40 | | 85 | °C | | 3 |
| Storage Temperature Range | Tstg | -65 | | 150 | °C | | 3 |
| Lead Temperature (Soldering) | TL | | | 260 | °C | 10 seconds | 3 |
## CAD (KiCad official)
- Symbol: `LM2902M`
- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`
- 3D model: SOP-14 (KiCad packages3D, STEP)
- 3D model files: `lm2902m-etched.step` / `lm2902m-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2902m.step` / `lm2902m.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/lm2902m-datasheet.pdf) (13 pp, sha256 `6283ee242151e579`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2902m-datasheet.pdf)