main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm2902m: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm2902m: viewers · Ray
lm2902m-etched.fit.json lm2902m: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2902m-etched.glb lm2902m: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wit… · Ray
lm2902m-etched.step lm2902m: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wit… · Ray
lm2902m.glb Publish 0.1.0 · Ray
lm2902m.kicad_mod Publish 0.1.0 · Ray
lm2902m.kicad_sym Publish 0.1.0 · Ray
lm2902m.lbr Publish 0.1.0 · Ray
lm2902m.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json lm2902m: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wit… · Ray
README.md lm2902m: specified limits as data (metadata.characteristics, 40 rows from the datasheet) · Ray

LM2902M

HGSEMI · Operational Amplifier · SOP-14

LM2902M from HGSEMI, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of amplifier 1. Push-pull output; short-circuit current ~40 mA at VCC = +15V.
2 IN1- input Inverting input of amplifier 1. Input bias current typ. 20 nA; common-mode range includes ground.
3 IN1+ input Non-inverting input of amplifier 1. Input common-mode range 0V to VCC−1.5V.
4 VCC+ power_in Positive supply. Single supply +3V to +30V, or split supply +1.5V to +15V. Absolute max ±16 to 32V.
5 IN2+ input Non-inverting input of amplifier 2.
6 IN2- input Inverting input of amplifier 2.
7 OUT2 output Output of amplifier 2.
8 OUT3 output Output of amplifier 3.
9 IN3- input Inverting input of amplifier 3.
10 IN3+ input Non-inverting input of amplifier 3.
11 VCC- power_in Negative supply / ground. Tied to GND for single-supply operation, or to negative rail for split-supply.
12 IN4+ input Non-inverting input of amplifier 4.
13 IN4- input Inverting input of amplifier 4.
14 OUT4 output Output of amplifier 4.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package SOP-14
Category Op-amp/Cmp
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • LM2902MM/TR
  • LM2902MN
  • LM2902MMT/TR
  • LM2902MLQ/TR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage Vio 2 7 mV Tamb = +25°C; VCC+=5V, VO=1.4V 4
Input Offset Voltage Vio 9 mV Tmin ≤ Tamb ≤ Tmax; VCC+=5V, VO=1.4V 4
Input Offset Current Iio 2 30 nA Tamb = +25°C; VCC+=5V, VO=1.4V 4
Input Offset Current Iio 40 nA Tmin ≤ Tamb ≤ Tmax; VCC+=5V, VO=1.4V 4
Input Bias Current Iib 20 150 nA Tamb = +25°C; VCC+=5V, VO=1.4V 4
Input Bias Current Iib 300 nA Tmin ≤ Tamb ≤ Tmax; VCC+=5V, VO=1.4V 4
Large Signal Voltage Gain Avd 50 100 V/mV Tamb = +25°C; VCC+=+15V, RL=2kΩ, VO=1.4V to 11.4V 4
Large Signal Voltage Gain Avd 25 V/mV Tmin ≤ Tamb ≤ Tmax; VCC+=+15V, RL=2kΩ, VO=1.4V to 11.4V 4
Supply Voltage Rejection Ratio SVR 65 110 dB Tamb = +25°C; RS ≤ 10kΩ 4
Supply Voltage Rejection Ratio SVR 65 dB Tmin ≤ Tamb ≤ Tmax; RS ≤ 10kΩ 4
Supply Current, all Amp, no load Icc 0.7 1.5 mA Tamb = +25°C; VCC = +5V 4
Supply Current, all Amp, no load Icc 0.8 1.5 mA Tamb = +25°C; VCC = +30V 4
Supply Current, all Amp, no load Icc 1.2 3 mA Tmin ≤ Tamb ≤ Tmax; VCC = +5V 4
Input Common Mode Voltage Range Vicm 0 V Tamb = +25°C; VCC = +30V; printed max VCC -1.5 V (not numeric) 4
Common-mode Rejection Ratio CMR 70 80 dB Tamb = +25°C; RS ≤ 10kΩ 4
Common-mode Rejection Ratio CMR 60 dB Tmin ≤ Tamb ≤ Tmax; RS ≤ 10kΩ 4
Output Short-circuit Current IO 20 40 70 mA VCC = +15V, Vo = +2V; Vid = +1V 4
Output Sink Current Isink 10 20 mA VCC = +15V, Vo = +2V; Vid = -1V 4
Output Sink Current Isink 12 50 µA VCC = +15V, Vo = +0.2V; Vid = -1V 4
High Level Output Voltage VOH 26 V Tamb = +25°C; VCC = +30V, RL = 2kΩ 4
High Level Output Voltage VOH 27 V Tamb = +25°C; VCC = +30V, RL = 10kΩ 4
Low Level Output Voltage VOL 5 20 mV Tamb = +25°C; RL = 10kΩ 4
Low Level Output Voltage VOL 20 mV Tmin ≤ Tamb ≤ Tmax; RL = 10kΩ 4
Input Offset Voltage Drift DVio 7 30 µV/°C 5
Input Offset Current Drift DIio 10 200 pA/°C 5
Slew Rate SR 0.4 V/µs VCC = 15V, Vi = 0.5 to 3V, RL = 2kΩ, CL = 100pF, unity gain 4
Gain Bandwidth Product GBP 1.3 MHz VCC = 30V, Vin = 10mV, RL = 2kΩ, CL = 100pF 5
Total Harmonic Distortion THD 0.015 % f = 1kHz, AV = 20dB, RL = 2kΩ, Vo = 2Vpp, CL = 100pF, VCC = 30V 5
Equivalent Input Noise Voltage en 40 nV/√Hz f = 1kHz, RS = 100Ω, VCC = 30V 5
Channel Separation VO1/VO2 120 dB 1kHz ≤ f ≤ 20kHz 5
Supply Voltage (single supply) VCC 3 30 V Single supply (Features list) 1
Supply Voltage (dual supplies) VCC 1.5 15 V Dual supplies, ±1.5V to ±15V as printed in Features 1
Supply Voltage VCC 32 V Printed as ±16 to 32 V 3
Differential Input Voltage Vid 32 V 3
Input Voltage VI -0.3 32 V 3
Power Dissipation ptot 400 mW D Suffix (assumed to be the SOP-14 package; not mapped explicitly in text) 3
Input Current Iin 50 mA Note 3: only when input driven negative 3
Operating Free-Air Temperature Range Toper -40 85 °C 3
Storage Temperature Range Tstg -65 150 °C 3
Lead Temperature (Soldering) TL 260 °C 10 seconds 3

CAD (KiCad official)

  • Symbol: LM2902M
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOP-14 (KiCad packages3D, STEP)
  • 3D model files: lm2902m-etched.step / lm2902m-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2902m.step / lm2902m.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (13 pp, sha256 6283ee242151e579, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF