main
Ray Publish 0.1.1 85601e1
{
  "slug": "lm2852ymxax-1-5",
  "version": "0.1.1",
  "type": "component",
  "description": "Texas Instruments LM2852YMXAX 1 5 NOPB DC-DC Converters, HTSSOP-14-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "lm2852ymxax-1.5"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm2852ymxax-1-5.kicad_sym",
    "lm2852ymxax-1-5.kicad_mod",
    "lm2852ymxax-1-5.glb",
    "lm2852ymxax-1-5.step",
    "lm2852ymxax-1-5.lbr",
    "docs/hero.png",
    "docs/lm2852ymxax-1-5-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm2852ymxax-1-5-etched.step",
    "lm2852ymxax-1-5-hero.glb",
    "lm2852ymxax-1-5-hero.overlay.json"
  ],
  "component": {
    "mpn": "LM2852YMXAX-1.5",
    "manufacturer": "Texas Instruments LM2852YMXAX 1 5 NOPB",
    "package": "HTSSOP-14-EP",
    "pin_count": 15,
    "category": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lm2852ymxax-1.5.pdf",
    "parts": {
      "symbol": "lm2852ymxax-1-5.kicad_sym",
      "footprint": "lm2852ymxax-1-5.kicad_mod",
      "model_3d": "lm2852ymxax-1-5-hero.glb",
      "model_3d_plain": "lm2852ymxax-1-5.glb",
      "model_3d_step": "lm2852ymxax-1-5-etched.step",
      "model_3d_step_plain": "lm2852ymxax-1-5.step",
      "lbr": "lm2852ymxax-1-5.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "AVIN",
        "type": "power_in",
        "description": "Chip bias / analog input supply. Powers the internal control logic and analog circuitry. Connect to the input voltage (2.85 V to 5.5 V) or a separate rail; filter close to the pin."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable input. Drive low (to GND) to disable the regulator; drive high (to AVIN) or leave floating to enable it. Pin is internally pulled up."
      },
      {
        "number": "3",
        "name": "SGND",
        "type": "power_in",
        "description": "Signal (analog) ground reference for the internal control circuitry. Tie to the PGND / ground plane at a single point near the device."
      },
      {
        "number": "4",
        "name": "SS",
        "type": "passive",
        "description": "Soft-start pin. Connect a small capacitor (1 nF to 50 nF) to ground to program the startup ramp. Internal soft-start resistance is ~400 kΩ."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Must be tied to ground or left floating in the application."
      },
      {
        "number": "6",
        "name": "PVIN",
        "type": "power_in",
        "description": "Power input to the internal high-side PFET switch (source connection). Bypass with a low-ESR ceramic capacitor (e.g. 22 µF) close to the pin. Must be tied together with pin 7."
      },
      {
        "number": "7",
        "name": "PVIN",
        "type": "power_in",
        "description": "Power input to the internal high-side PFET switch (source connection). Must be tied together with pin 6 on the PCB."
      },
      {
        "number": "8",
        "name": "SW",
        "type": "power_out",
        "description": "Switch node - drain of the internal high-side PFET and low-side NFET. Connect through the output inductor (e.g. 10 µH) to the load. Must be tied together with pin 9."
      },
      {
        "number": "9",
        "name": "SW",
        "type": "power_out",
        "description": "Switch node. Must be tied together with pin 8 on the PCB."
      },
      {
        "number": "10",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground - return for the low-side NFET switch current. Connect to a large ground plane; must be tied together with pin 11."
      },
      {
        "number": "11",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground - return for the low-side NFET switch current. Must be tied together with pin 10."
      },
      {
        "number": "12",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Must be tied to ground or left floating in the application."
      },
      {
        "number": "13",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Must be tied to ground or left floating in the application."
      },
      {
        "number": "14",
        "name": "SNS",
        "type": "input",
        "description": "Output voltage sense pin. Connect Kelvin-style to VOUT as close to the load as possible; internal sense resistance is ~400 kΩ. This is the regulation feedback point."
      },
      {
        "number": "15",
        "name": "EP",
        "type": "power_in",
        "description": "Exposed thermal pad on the underside of the HTSSOP-14 (PowerPAD) package. Must be soldered to a large ground plane / thermal-pad copper for heat dissipation and connected to ground."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": "LM2852YMXAX-1.5-ND",
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:04:02Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "LM2852YMXAX-1.5-ND",
        "status": "found"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "lm2852ymxax-1-5.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.5,
          4.5,
          1.6
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "159bde8ae62aee3ed827ac9ee8a52e8fcb2fcb51f8b8deba81c2213de6f24c86",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm2852ymxax-1-5-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.5,
          4.5,
          1.6
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "71ac2b08367b8c45432d617cfefa4c8ec06bd5bdaa4147e41411031f0bf321dd",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}