← Commit history
Publish 0.1.1
4 files changed
+632−11
lm2852ymxax-1-5-hero.glbadded⋯ 1 unchanged line ⋯
lm2852ymxax-1-5-hero.overlay.jsonadded+444@@ -0,0 +1,444 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LM2852YMXAX-1.5",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 18,+ "span_mm": 7.4,+ "dash_mm": 0.185,+ "gap_mm": 0.111,+ "pad_stroke_mm": 0.0444+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 14,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.588,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -2.75,+ 2.75,+ -2.075,+ 2.075+ ],+ "pads_bbox_mm": [+ -3.675,+ 3.675,+ -2.175,+ 2.175+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "lm2852ymxax-1-5-etched.glb",+ "glb_sha256": "c66a5bb04835e327b7996ec5b436a768210d225f1844ffbfe2d7995dbf3905be",+ "footprint": "lm2852ymxax-1-5.kicad_mod",+ "footprint_sha256": "e0e79e2ebe90cbdd272ad5a2f200d4c89d57046613334574a2b5cc21b98d22ed",+ "pins": "page.json component.pins",+ "pins_sha256": "77128e95b68517fb461469d6b44877466a29c5be7bab3700f2d9d4bfaf442ec5"+ },+ "generator": "adom-wiki 1.8.25 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "AVIN",+ "x": -3.775,+ "y": -1.95,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "2",+ "text": "EN",+ "x": -3.775,+ "y": -1.3,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "SGND",+ "x": -3.775,+ "y": -0.65,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "SS",+ "x": -3.775,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "5",+ "text": "NC",+ "x": -3.775,+ "y": 0.65,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "6",+ "text": "PVIN",+ "x": -3.775,+ "y": 1.3,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "7",+ "text": "PVIN",+ "x": -3.775,+ "y": 1.95,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "8",+ "text": "SW",+ "x": 3.775,+ "y": 1.95,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "9",+ "text": "SW",+ "x": 3.775,+ "y": 1.3,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "10",+ "text": "PGND",+ "x": 3.775,+ "y": 0.65,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "11",+ "text": "PGND",+ "x": 3.775,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "12",+ "text": "NC",+ "x": 3.775,+ "y": -0.65,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "13",+ "text": "NC",+ "x": 3.775,+ "y": -1.3,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "14",+ "text": "SNS",+ "x": 3.775,+ "y": -1.95,+ "align": "left",+ "vertical": false,+ "h": 0.325+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "rect",+ "center_mm": [+ -2.95,+ -1.95+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "rect",+ "center_mm": [+ -2.95,+ -1.3+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "rect",+ "center_mm": [+ -2.95,+ -0.65+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "rect",+ "center_mm": [+ -2.95,+ 0.0+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "rect",+ "center_mm": [+ -2.95,+ 0.65+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "rect",+ "center_mm": [+ -2.95,+ 1.3+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "rect",+ "center_mm": [+ -2.95,+ 1.95+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "rect",+ "center_mm": [+ 2.95,+ 1.95+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "rect",+ "center_mm": [+ 2.95,+ 1.3+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "rect",+ "center_mm": [+ 2.95,+ 0.65+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "rect",+ "center_mm": [+ 2.95,+ 0.0+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "rect",+ "center_mm": [+ 2.95,+ -0.65+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "rect",+ "center_mm": [+ 2.95,+ -1.3+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "rect",+ "center_mm": [+ 2.95,+ -1.95+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "rect",+ "center_mm": [+ -0.75,+ -0.9+ ],+ "size_mm": [+ 1.5,+ 1.8+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "rect",+ "center_mm": [+ -0.75,+ 0.9+ ],+ "size_mm": [+ 1.5,+ 1.8+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "rect",+ "center_mm": [+ 0.75,+ -0.9+ ],+ "size_mm": [+ 1.5,+ 1.8+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "rect",+ "center_mm": [+ 0.75,+ 0.9+ ],+ "size_mm": [+ 1.5,+ 1.8+ ],+ "rot": 0.0+ }+ ]+}
package.json+180−4@@ -1,6 +1,6 @@ { "slug": "lm2852ymxax-1-5",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments LM2852YMXAX 1 5 NOPB DC-DC Converters, HTSSOP-14-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,182 @@ "docs/hero.png", "docs/lm2852ymxax-1-5-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "lm2852ymxax-1-5-etched.step",+ "lm2852ymxax-1-5-hero.glb",+ "lm2852ymxax-1-5-hero.overlay.json"+ ],+ "component": {+ "mpn": "LM2852YMXAX-1.5",+ "manufacturer": "Texas Instruments LM2852YMXAX 1 5 NOPB",+ "package": "HTSSOP-14-EP",+ "pin_count": 15,+ "category": "DC-DC Converters",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lm2852ymxax-1.5.pdf",+ "parts": {+ "symbol": "lm2852ymxax-1-5.kicad_sym",+ "footprint": "lm2852ymxax-1-5.kicad_mod",+ "model_3d": "lm2852ymxax-1-5-hero.glb",+ "model_3d_plain": "lm2852ymxax-1-5.glb",+ "model_3d_step": "lm2852ymxax-1-5-etched.step",+ "model_3d_step_plain": "lm2852ymxax-1-5.step",+ "lbr": "lm2852ymxax-1-5.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "AVIN",+ "type": "power_in",+ "description": "Chip bias / analog input supply. Powers the internal control logic and analog circuitry. Connect to the input voltage (2.85 V to 5.5 V) or a separate rail; filter close to the pin."+ },+ {+ "number": "2",+ "name": "EN",+ "type": "input",+ "description": "Enable input. Drive low (to GND) to disable the regulator; drive high (to AVIN) or leave floating to enable it. Pin is internally pulled up."+ },+ {+ "number": "3",+ "name": "SGND",+ "type": "power_in",+ "description": "Signal (analog) ground reference for the internal control circuitry. Tie to the PGND / ground plane at a single point near the device."+ },+ {+ "number": "4",+ "name": "SS",+ "type": "passive",+ "description": "Soft-start pin. Connect a small capacitor (1 nF to 50 nF) to ground to program the startup ramp. Internal soft-start resistance is ~400 kΩ."+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Must be tied to ground or left floating in the application."+ },+ {+ "number": "6",+ "name": "PVIN",+ "type": "power_in",+ "description": "Power input to the internal high-side PFET switch (source connection). Bypass with a low-ESR ceramic capacitor (e.g. 22 µF) close to the pin. Must be tied together with pin 7."+ },+ {+ "number": "7",+ "name": "PVIN",+ "type": "power_in",+ "description": "Power input to the internal high-side PFET switch (source connection). Must be tied together with pin 6 on the PCB."+ },+ {+ "number": "8",+ "name": "SW",+ "type": "power_out",+ "description": "Switch node - drain of the internal high-side PFET and low-side NFET. Connect through the output inductor (e.g. 10 µH) to the load. Must be tied together with pin 9."+ },+ {+ "number": "9",+ "name": "SW",+ "type": "power_out",+ "description": "Switch node. Must be tied together with pin 8 on the PCB."+ },+ {+ "number": "10",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground - return for the low-side NFET switch current. Connect to a large ground plane; must be tied together with pin 11."+ },+ {+ "number": "11",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground - return for the low-side NFET switch current. Must be tied together with pin 10."+ },+ {+ "number": "12",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Must be tied to ground or left floating in the application."+ },+ {+ "number": "13",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Must be tied to ground or left floating in the application."+ },+ {+ "number": "14",+ "name": "SNS",+ "type": "input",+ "description": "Output voltage sense pin. Connect Kelvin-style to VOUT as close to the load as possible; internal sense resistance is ~400 kΩ. This is the regulation feedback point."+ },+ {+ "number": "15",+ "name": "EP",+ "type": "power_in",+ "description": "Exposed thermal pad on the underside of the HTSSOP-14 (PowerPAD) package. Must be soldered to a large ground plane / thermal-pad copper for heat dissipation and connected to ground."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "digikey": "LM2852YMXAX-1.5-ND",+ "mouser": false+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:04:02Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": "LM2852YMXAX-1.5-ND",+ "status": "found"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "models_3d": [+ {+ "file": "lm2852ymxax-1-5.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 5.5,+ 4.5,+ 1.6+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "159bde8ae62aee3ed827ac9ee8a52e8fcb2fcb51f8b8deba81c2213de6f24c86",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm2852ymxax-1-5-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 5.5,+ 4.5,+ 1.6+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "71ac2b08367b8c45432d617cfefa4c8ec06bd5bdaa4147e41411031f0bf321dd",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+8−7@@ -1,6 +1,6 @@ { "slug": "lm2852ymxax-1-5",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments LM2852YMXAX 1 5 NOPB DC-DC Converters, HTSSOP-14-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,11 @@ "docs/lm2852ymxax-1-5-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "lm2852ymxax-1-5-etched.step"+ "lm2852ymxax-1-5-etched.step",+ "lm2852ymxax-1-5-hero.glb",+ "lm2852ymxax-1-5-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -204,5 +204,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}