component
LM2833XMY
Public Made by Adomby adom
Texas Instruments DC-DC Converters, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2833XMY
Texas Instruments · DC-DC Converters · MSOP-10-EP
LM2833XMY from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VINC | power_in | Input supply for internal bias and control circuitry; it must be locally bypassed to GND. |
| 2 | EN | input | Enable control input where logic high enables operation; do not let this pin float or subject it to voltages greater than VIN + 0.3V. |
| 3 | SGND | power_in | Signal (analog) ground; place the bottom resistor of the feedback network as close as possible to this pin for good load regulation. |
| 4 | NC | unconnected | No user function; the datasheet says to connect this pin to GND. |
| 5 | FB | input | Feedback pin that connects to the external resistor divider to set the output voltage; FB voltage absolute maximum is -0.5V to 3V. |
| 6 | PGND | power_in | Power ground pin that provides the ground return path for the internal driver. |
| 7 | SW | output | Switch pin that connects to the inductor and catch diode; SW voltage absolute maximum is -0.5V to 7V. |
| 8 | SW | output | Switch pin that connects to the inductor and catch diode; SW voltage absolute maximum is -0.5V to 7V. |
| 9 | VIND | power_in | Input supply voltage pin; connect a bypass capacitor locally from this pin to PGND. |
| 10 | VIND | power_in | Input supply voltage pin; connect a bypass capacitor locally from this pin to PGND. |
| 11 | DAP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10-EP |
| Category | Power Management (PMIC) |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
LM2833XMY - Footprint:
Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm - 3D model: MSOP-10-EP (KiCad packages3D, STEP)
- 3D model files:
lm2833xmy-etched.step/lm2833xmy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2833xmy.step/lm2833xmy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
bf1870ef3f8a9cb6, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).