main
History Download
Ray Publish 0.1.0 d2a0621

LM2830XQMFE

Texas Instruments · DC-DC Converters · SOT-23-5

LM2830XQMFE from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 SW output Output switch that connects to the inductor and catch diode.
2 GND power_in Signal and power ground pin; place the bottom resistor of the feedback network as close as possible to this pin.
3 FB input Feedback pin that connects to the external resistor divider to set the output voltage.
4 EN input Enable control input, logic high enables operation; do not allow this pin to float or be greater than VIN + 0.3 V.
5 VIN power_in Input supply voltage, 3 V to 5.5 V recommended operating range.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN -0.5 7 V 4
FB voltage FB -0.5 3 V 4
EN voltage EN -0.5 7 V 4
SW voltage SW -0.5 7 V 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
ESD HBM (Q1) V(ESD) -2000 2000 V per AEC Q100-002 4
ESD CDM SOT-23 corner pins (Q1) V(ESD) -1000 1000 V SOT-23 corner pins (1, 3, 4, and 5), AEC Q100-011 4
ESD CDM other pins (Q1) V(ESD) -1000 1000 V Other pins, AEC Q100-011 4
Input voltage VIN 3 5.5 V 4
Junction temperature TJ -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 165.2 °C/W DBV 5 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 69.9 °C/W DBV 5 pins 4
Junction-to-board thermal resistance RθJB 27.3 °C/W DBV 5 pins 4
Junction-to-top characterization parameter ψJT 1.8 °C/W DBV 5 pins 4
Junction-to-board characterization parameter ψJB 26.8 °C/W DBV 5 pins 4
Feedback voltage VFB 0.588 0.6 0.612 V WSON and SOT-23 Package 5
Feedback input bias current IB 0.1 100 nA 5
Undervoltage lockout, VIN rising UVLO 2.73 2.9 V VIN Rising 5
Undervoltage lockout, VIN falling UVLO 1.85 2.3 V VIN Falling 5
Switching frequency FSW 1.2 1.6 1.95 MHz LM2830-X 5
Maximum duty cycle DMAX 86 94 % LM2830-X 5
Switch on resistance RDS(ON) 130 195 mΩ SOT-23 Package 5
Switch current limit ICL 1.2 1.75 A VIN = 3.3 V 5
Shutdown threshold voltage VEN_TH 0.4 V 5
Enable threshold voltage VEN_TH 1.8 V 5
Switch leakage ISW 100 nA 5
Enable pin current sink/source IEN 100 nA 5
Quiescent current (switching) IQ 3.3 5 mA LM2830X, VFB = 0.55 5
Quiescent current (shutdown) IQ 30 nA All Options, VEN = 0 V 5
Feedback voltage line regulation ΔVFB/VIN 0.02 %/V VIN = 3 V to 5 V 5
UVLO hysteresis 0.43 V 5
Minimum duty cycle DMIN 5 % LM2830-X 5
Thermal shutdown temperature TSD 165 °C 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM2830XQMFE
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm2830xqmfe-etched.step / lm2830xqmfe-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2830xqmfe.step / lm2830xqmfe.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 7d62c9d62d2a3fca, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF