3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLM2830XQMFE
Texas Instruments · DC-DC Converters · SOT-23-5
LM2830XQMFE from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Output switch that connects to the inductor and catch diode. |
| 2 | GND | power_in | Signal and power ground pin; place the bottom resistor of the feedback network as close as possible to this pin. |
| 3 | FB | input | Feedback pin that connects to the external resistor divider to set the output voltage. |
| 4 | EN | input | Enable control input, logic high enables operation; do not allow this pin to float or be greater than VIN + 0.3 V. |
| 5 | VIN | power_in | Input supply voltage, 3 V to 5.5 V recommended operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | -0.5 | 7 | V | 4 | ||
| FB voltage | FB | -0.5 | 3 | V | 4 | ||
| EN voltage | EN | -0.5 | 7 | V | 4 | ||
| SW voltage | SW | -0.5 | 7 | V | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD HBM (Q1) | V(ESD) | -2000 | 2000 | V | per AEC Q100-002 | 4 | |
| ESD CDM SOT-23 corner pins (Q1) | V(ESD) | -1000 | 1000 | V | SOT-23 corner pins (1, 3, 4, and 5), AEC Q100-011 | 4 | |
| ESD CDM other pins (Q1) | V(ESD) | -1000 | 1000 | V | Other pins, AEC Q100-011 | 4 | |
| Input voltage | VIN | 3 | 5.5 | V | 4 | ||
| Junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 165.2 | °C/W | DBV 5 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 69.9 | °C/W | DBV 5 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 27.3 | °C/W | DBV 5 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 1.8 | °C/W | DBV 5 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 26.8 | °C/W | DBV 5 pins | 4 | ||
| Feedback voltage | VFB | 0.588 | 0.6 | 0.612 | V | WSON and SOT-23 Package | 5 |
| Feedback input bias current | IB | 0.1 | 100 | nA | 5 | ||
| Undervoltage lockout, VIN rising | UVLO | 2.73 | 2.9 | V | VIN Rising | 5 | |
| Undervoltage lockout, VIN falling | UVLO | 1.85 | 2.3 | V | VIN Falling | 5 | |
| Switching frequency | FSW | 1.2 | 1.6 | 1.95 | MHz | LM2830-X | 5 |
| Maximum duty cycle | DMAX | 86 | 94 | % | LM2830-X | 5 | |
| Switch on resistance | RDS(ON) | 130 | 195 | mΩ | SOT-23 Package | 5 | |
| Switch current limit | ICL | 1.2 | 1.75 | A | VIN = 3.3 V | 5 | |
| Shutdown threshold voltage | VEN_TH | 0.4 | V | 5 | |||
| Enable threshold voltage | VEN_TH | 1.8 | V | 5 | |||
| Switch leakage | ISW | 100 | nA | 5 | |||
| Enable pin current sink/source | IEN | 100 | nA | 5 | |||
| Quiescent current (switching) | IQ | 3.3 | 5 | mA | LM2830X, VFB = 0.55 | 5 | |
| Quiescent current (shutdown) | IQ | 30 | nA | All Options, VEN = 0 V | 5 | ||
| Feedback voltage line regulation | ΔVFB/VIN | 0.02 | %/V | VIN = 3 V to 5 V | 5 | ||
| UVLO hysteresis | 0.43 | V | 5 | ||||
| Minimum duty cycle | DMIN | 5 | % | LM2830-X | 5 | ||
| Thermal shutdown temperature | TSD | 165 | °C | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM2830XQMFE - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm2830xqmfe-etched.step/lm2830xqmfe-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2830xqmfe.step/lm2830xqmfe.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
7d62c9d62d2a3fca, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).