main
Ray Publish 0.1.1 9be6351
{
  "slug": "lm2775dsgr",
  "version": "0.1.1",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "lm2775dsgr"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm2775dsgr.kicad_sym",
    "lm2775dsgr.kicad_mod",
    "lm2775dsgr.glb",
    "lm2775dsgr.step",
    "lm2775dsgr.lbr",
    "docs/hero.png",
    "docs/lm2775dsgr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm2775dsgr-etched.step",
    "lm2775dsgr-hero.glb",
    "lm2775dsgr-hero.overlay.json"
  ],
  "component": {
    "mpn": "LM2775DSGR",
    "manufacturer": "Texas Instruments",
    "package": "WSON-8-EP(2x2)",
    "pin_count": 9,
    "category": "PMIC",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lm2775dsgr.pdf",
    "parts": {
      "symbol": "lm2775dsgr.kicad_sym",
      "footprint": "lm2775dsgr.kicad_mod",
      "model_3d": "lm2775dsgr-hero.glb",
      "model_3d_plain": "lm2775dsgr.glb",
      "model_3d_step": "lm2775dsgr-etched.step",
      "model_3d_step_plain": "lm2775dsgr.step",
      "lbr": "lm2775dsgr.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "PFM",
        "type": "input",
        "description": "PFM mode enable. Logic high (1) allows PFM operation for improved light-load efficiency; logic low (0) forces fixed-frequency PWM. Logic thresholds: VIL ≤ 0.4 V, VIH ≥ 1.2 V (referenced to VIN, max VIN + 0.3 V)."
      },
      {
        "number": "2",
        "name": "C1-",
        "type": "passive",
        "description": "Flying capacitor negative terminal. Connect a 1 µF ceramic flying capacitor (C1) between C1+ (pin 3) and C1- (pin 2) for the switched-capacitor charge pump."
      },
      {
        "number": "3",
        "name": "C1+",
        "type": "passive",
        "description": "Flying capacitor positive terminal. Connect a 1 µF ceramic flying capacitor (C1) between C1+ (pin 3) and C1- (pin 2) for the switched-capacitor charge pump."
      },
      {
        "number": "4",
        "name": "OUTDIS",
        "type": "input",
        "description": "Output disconnect / discharge option. Logic high (1) enables active output discharge (~500 µA typical) during shutdown; logic low (0) leaves the output high-impedance without pull-down during shutdown. Logic thresholds: VIL ≤ 0.4 V, VIH ≥ 1.2 V."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Chip enable. Logic high (1) enables the converter; logic low (0) shuts the device down (ISD ≈ 0.7 µA). Logic thresholds: VIL ≤ 0.4 V, VIH ≥ 1.2 V (max VIN + 0.3 V)."
      },
      {
        "number": "6",
        "name": "VOUT",
        "type": "power_out",
        "description": "Charge-pump output. Regulated 5 V (4.8 V to 5.2 V) at up to 200 mA. Bypass to GND with a 2.2 µF ceramic capacitor. Input current limit ICL ≈ 600 mA."
      },
      {
        "number": "7",
        "name": "VIN",
        "type": "power_in",
        "description": "Input voltage supply, 2.7 V to 5.5 V (abs max 6 V). Bypass to GND with a 2.2 µF ceramic capacitor. UVLO rising ≈ 2.6 V, falling ≈ 2.4 V."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground return. Connect to system ground plane along with the thermal pad."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed thermal pad on the bottom of the WSON package. Must be connected to GND and to a copper pour for thermal performance (RθJC(bot) ≈ 12.8 °C/W)."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lm2775dsgr.pdf",
        "pages": 28,
        "sha256": "1c2c46d32f10cd73",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm2775dsgr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2,
          1.98,
          0.82
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7672cac8d88d8679800ef3bf90954e7996ea74e8ddb1f157f2d82bca6b2015e4",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm2775dsgr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2,
          1.98,
          0.82
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "866b0a8683d662a22ec6118dac3130d0de406a2987da98956389cbf769dfef5c",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "title": "LM2775DSGR",
  "brief": "Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WSON-8-EP(2x2)",
      "Category": "PMIC",
      "Pins": "9"
    }
  },
  "discovery_triggers": [
    "lm2775dsgr"
  ],
  "discovery_pitch": "LM2775DSGR (Texas Instruments) component page with datasheet-verified CAD.",
  "visibility": "public"
}