← Commit history
Publish 0.1.1
4 files changed
+439−11
lm2775dsgr-hero.glbadded⋯ 1 unchanged line ⋯
lm2775dsgr-hero.overlay.jsonadded+273@@ -0,0 +1,273 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LM2775DSGR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 9,+ "span_mm": 3.1,+ "dash_mm": 0.12,+ "gap_mm": 0.072,+ "pad_stroke_mm": 0.03+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 3,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.25,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -1.0,+ 1.0,+ -0.99,+ 0.99+ ],+ "pads_bbox_mm": [+ -1.2,+ 1.2,+ -0.875,+ 0.875+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "lm2775dsgr-etched.glb",+ "glb_sha256": "ce5a3860dbf7c784b3f7736c05ea28226ba14a609fc91ea105d7df433b041c1b",+ "footprint": "lm2775dsgr.kicad_mod",+ "footprint_sha256": "4caf3c03a000b3b0fce4f098552c0dff3aad658f5bc1a7cfe605417eb7d5584e",+ "pins": "page.json component.pins",+ "pins_sha256": "5a3205af864de3412b877b9563812f242420da3818d4af5775527481142f123b"+ },+ "generator": "adom-wiki 1.8.25 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "PFM",+ "x": -1.3,+ "y": -0.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "2",+ "text": "C1-",+ "x": -1.3,+ "y": -0.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "3",+ "text": "C1+",+ "x": -1.3,+ "y": 0.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "4",+ "text": "OUTDIS",+ "x": -1.3,+ "y": 0.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "5",+ "text": "EN",+ "x": 1.3,+ "y": 0.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "6",+ "text": "VOUT",+ "x": 1.3,+ "y": 0.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "7",+ "text": "VIN",+ "x": 1.3,+ "y": -0.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "8",+ "text": "GND",+ "x": 1.3,+ "y": -0.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -0.95,+ -0.75+ ],+ "size_mm": [+ 0.5,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -0.95,+ -0.25+ ],+ "size_mm": [+ 0.5,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -0.95,+ 0.25+ ],+ "size_mm": [+ 0.5,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -0.95,+ 0.75+ ],+ "size_mm": [+ 0.5,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 0.95,+ 0.75+ ],+ "size_mm": [+ 0.5,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 0.95,+ 0.25+ ],+ "size_mm": [+ 0.5,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 0.95,+ -0.25+ ],+ "size_mm": [+ 0.5,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 0.95,+ -0.75+ ],+ "size_mm": [+ 0.5,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 0.9,+ 1.6+ ],+ "rot": 0.0+ }+ ]+}
package.json+157−4@@ -1,6 +1,6 @@ { "slug": "lm2775dsgr",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,159 @@ "docs/hero.png", "docs/lm2775dsgr-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "lm2775dsgr-etched.step",+ "lm2775dsgr-hero.glb",+ "lm2775dsgr-hero.overlay.json"+ ],+ "component": {+ "mpn": "LM2775DSGR",+ "manufacturer": "Texas Instruments",+ "package": "WSON-8-EP(2x2)",+ "pin_count": 9,+ "category": "PMIC",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lm2775dsgr.pdf",+ "parts": {+ "symbol": "lm2775dsgr.kicad_sym",+ "footprint": "lm2775dsgr.kicad_mod",+ "model_3d": "lm2775dsgr-hero.glb",+ "model_3d_plain": "lm2775dsgr.glb",+ "model_3d_step": "lm2775dsgr-etched.step",+ "model_3d_step_plain": "lm2775dsgr.step",+ "lbr": "lm2775dsgr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "PFM",+ "type": "input",+ "description": "PFM mode enable. Logic high (1) allows PFM operation for improved light-load efficiency; logic low (0) forces fixed-frequency PWM. Logic thresholds: VIL ≤ 0.4 V, VIH ≥ 1.2 V (referenced to VIN, max VIN + 0.3 V)."+ },+ {+ "number": "2",+ "name": "C1-",+ "type": "passive",+ "description": "Flying capacitor negative terminal. Connect a 1 µF ceramic flying capacitor (C1) between C1+ (pin 3) and C1- (pin 2) for the switched-capacitor charge pump."+ },+ {+ "number": "3",+ "name": "C1+",+ "type": "passive",+ "description": "Flying capacitor positive terminal. Connect a 1 µF ceramic flying capacitor (C1) between C1+ (pin 3) and C1- (pin 2) for the switched-capacitor charge pump."+ },+ {+ "number": "4",+ "name": "OUTDIS",+ "type": "input",+ "description": "Output disconnect / discharge option. Logic high (1) enables active output discharge (~500 µA typical) during shutdown; logic low (0) leaves the output high-impedance without pull-down during shutdown. Logic thresholds: VIL ≤ 0.4 V, VIH ≥ 1.2 V."+ },+ {+ "number": "5",+ "name": "EN",+ "type": "input",+ "description": "Chip enable. Logic high (1) enables the converter; logic low (0) shuts the device down (ISD ≈ 0.7 µA). Logic thresholds: VIL ≤ 0.4 V, VIH ≥ 1.2 V (max VIN + 0.3 V)."+ },+ {+ "number": "6",+ "name": "VOUT",+ "type": "power_out",+ "description": "Charge-pump output. Regulated 5 V (4.8 V to 5.2 V) at up to 200 mA. Bypass to GND with a 2.2 µF ceramic capacitor. Input current limit ICL ≈ 600 mA."+ },+ {+ "number": "7",+ "name": "VIN",+ "type": "power_in",+ "description": "Input voltage supply, 2.7 V to 5.5 V (abs max 6 V). Bypass to GND with a 2.2 µF ceramic capacitor. UVLO rising ≈ 2.6 V, falling ≈ 2.4 V."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground return. Connect to system ground plane along with the thermal pad."+ },+ {+ "number": "9",+ "name": "GND",+ "type": "power_in",+ "description": "Exposed thermal pad on the bottom of the WSON package. Must be connected to GND and to a copper pour for thermal performance (RθJC(bot) ≈ 12.8 °C/W)."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/lm2775dsgr.pdf",+ "pages": 28,+ "sha256": "1c2c46d32f10cd73",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lm2775dsgr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2,+ 1.98,+ 0.82+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "7672cac8d88d8679800ef3bf90954e7996ea74e8ddb1f157f2d82bca6b2015e4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm2775dsgr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2,+ 1.98,+ 0.82+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "866b0a8683d662a22ec6118dac3130d0de406a2987da98956389cbf769dfef5c",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "LM2775DSGR",+ "brief": "Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "WSON-8-EP(2x2)",+ "Category": "PMIC",+ "Pins": "9"+ }+ },+ "discovery_triggers": [+ "lm2775dsgr"+ ],+ "discovery_pitch": "LM2775DSGR (Texas Instruments) component page with datasheet-verified CAD.",+ "visibility": "public"+}
page.json+9−7@@ -4,7 +4,7 @@ "slug": "lm2775dsgr", "title": "LM2775DSGR", "brief": "Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -185,11 +185,11 @@ "docs/lm2775dsgr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "lm2775dsgr-etched.step"+ "lm2775dsgr-etched.step",+ "lm2775dsgr-hero.glb",+ "lm2775dsgr-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "variants": [ { "mpn": "LM2775DSGR",@@ -200,5 +200,7 @@ "kind": "packaging" } ],- "updated_at": "2026-09-28T16:20:54.435Z"-}+ "updated_at": "2026-09-28T16:20:54.435Z",+ "description": "Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}