component
LM2675N-12
Public Made by Adomby adom
Texas Instruments DC-DC Converters, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LM2675N-12
Texas Instruments · DC-DC Converters · PDIP-8
LM2675N-12 from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CB | passive | Bootstrap capacitor connection for the high-side driver; Table 4-1 specifies a quality 470nF capacitor between CB and VSW. |
| 2 | NC | unconnected | No internal connection; leave unconnected. |
| 3 | NC | unconnected | No internal connection; leave unconnected. |
| 4 | FB | input | Feedback sense input that connects to the feedback divider midpoint for the adjustable version or directly to the output capacitor for fixed versions; the absolute maximum rating is -0.3 V to 14 V, and FB must not be shorted to ground while the regulator is enabled. |
| 5 | ON/OFF | input | Enable input where high enables the regulator and low (below about 1.4 V typical) puts it in shutdown; the absolute maximum rating is -0.1 V to 6 V. |
| 6 | GND | power_in | Power ground connected to system ground, which also serves as the ground return for CIN and COUT and should be kept close to CIN. |
| 7 | VIN | power_in | Supply input connected to the high-side FET collector that must stay within 6.5 V to 40 V (absolute maximum 45 V) and be bypassed by CIN placed close to the pin and GND. |
| 8 | VSW | output | Internal high-side FET source and switch node that connects to the inductor and the external diode cathode; the absolute maximum switch-to-ground voltage is -1 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LM2675N-12 - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
lm2675n-12-etched.step/lm2675n-12-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2675n-12.step/lm2675n-12.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
8986b0b605946f45, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2675N-12
**Texas Instruments** · DC-DC Converters · PDIP-8
LM2675N-12 from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CB | passive | Bootstrap capacitor connection for the high-side driver; Table 4-1 specifies a quality 470nF capacitor between CB and VSW. |
| 2 | NC | unconnected | No internal connection; leave unconnected. |
| 3 | NC | unconnected | No internal connection; leave unconnected. |
| 4 | FB | input | Feedback sense input that connects to the feedback divider midpoint for the adjustable version or directly to the output capacitor for fixed versions; the absolute maximum rating is -0.3 V to 14 V, and FB must not be shorted to ground while the regulator is enabled. |
| 5 | ON/OFF | input | Enable input where high enables the regulator and low (below about 1.4 V typical) puts it in shutdown; the absolute maximum rating is -0.1 V to 6 V. |
| 6 | GND | power_in | Power ground connected to system ground, which also serves as the ground return for CIN and COUT and should be kept close to CIN. |
| 7 | VIN | power_in | Supply input connected to the high-side FET collector that must stay within 6.5 V to 40 V (absolute maximum 45 V) and be bypassed by CIN placed close to the pin and GND. |
| 8 | VSW | output | Internal high-side FET source and switch node that connects to the inductor and the external diode cathode; the absolute maximum switch-to-ground voltage is -1 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `LM2675N-12`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files: `lm2675n-12-etched.step` / `lm2675n-12-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2675n-12.step` / `lm2675n-12.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm2675) (42 pp, sha256 `8986b0b605946f45`, retrieved 2026-10-08, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2675n-12-datasheet.pdf)