component
LM2675N-12
Public Made by Adomby adom
Texas Instruments DC-DC Converters, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# LM2675N-12++**Texas Instruments** · DC-DC Converters · PDIP-8++LM2675N-12 from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CB | passive | Bootstrap capacitor connection for the high-side driver; Table 4-1 specifies a quality 470nF capacitor between CB and VSW. |+| 2 | NC | unconnected | No internal connection; leave unconnected. |+| 3 | NC | unconnected | No internal connection; leave unconnected. |+| 4 | FB | input | Feedback sense input that connects to the feedback divider midpoint for the adjustable version or directly to the output capacitor for fixed versions; the absolute maximum rating is -0.3 V to 14 V, and FB must not be shorted to ground while the regulator is enabled. |+| 5 | ON/OFF | input | Enable input where high enables the regulator and low (below about 1.4 V typical) puts it in shutdown; the absolute maximum rating is -0.1 V to 6 V. |+| 6 | GND | power_in | Power ground connected to system ground, which also serves as the ground return for CIN and COUT and should be kept close to CIN. |+| 7 | VIN | power_in | Supply input connected to the high-side FET collector that must stay within 6.5 V to 40 V (absolute maximum 45 V) and be bypassed by CIN placed close to the pin and GND. |+| 8 | VSW | output | Internal high-side FET source and switch node that connects to the inductor and the external diode cathode; the absolute maximum switch-to-ground voltage is -1 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | PDIP-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `LM2675N-12`+- Footprint: `Package_DIP:DIP-8_W7.62mm`+- 3D model: PDIP-8 (KiCad packages3D, STEP)+- 3D model files: `lm2675n-12-etched.step` / `lm2675n-12-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2675n-12.step` / `lm2675n-12.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm2675) (42 pp, sha256 `8986b0b605946f45`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm2675n-12-datasheet.pdf)
page.jsonadded+201@@ -0,0 +1,201 @@+{+ "slug": "lm2675n-12",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lm2675n-12",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm2675n-12.kicad_sym",+ "lm2675n-12.kicad_mod",+ "lm2675n-12.glb",+ "lm2675n-12.step",+ "lm2675n-12.lbr",+ "docs/hero.png",+ "docs/lm2675n-12-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lm2675n-12-hero.glb",+ "lm2675n-12-hero.overlay.json"+ ],+ "component": {+ "mpn": "LM2675N-12",+ "manufacturer": "Texas Instruments",+ "package": "PDIP-8",+ "pin_count": 8,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lm2675",+ "parts": {+ "symbol": "lm2675n-12.kicad_sym",+ "footprint": "lm2675n-12.kicad_mod",+ "model_3d": "lm2675n-12-hero.glb",+ "model_3d_plain": "lm2675n-12.glb",+ "model_3d_step": "lm2675n-12-etched.step",+ "model_3d_step_plain": "lm2675n-12.step",+ "lbr": "lm2675n-12.lbr"+ },+ "distributor_links": {+ "lcsc": "C1355391",+ "digikey": "LM2675N-12-ND",+ "mouser": "926-LM2675N-12"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T14:33:58Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "LM2675N-12-ND",+ "status": "found",+ "lifecycle": "Obsolete"+ },+ "mouser": {+ "pn": "926-LM2675N-12",+ "status": "found",+ "lifecycle": "Obsolete"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "CB",+ "type": "passive",+ "description": "Bootstrap capacitor connection for the high-side driver; Table 4-1 specifies a quality 470nF capacitor between CB and VSW."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection; leave unconnected."+ },+ {+ "number": "3",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection; leave unconnected."+ },+ {+ "number": "4",+ "name": "FB",+ "type": "input",+ "description": "Feedback sense input that connects to the feedback divider midpoint for the adjustable version or directly to the output capacitor for fixed versions; the absolute maximum rating is -0.3 V to 14 V, and FB must not be shorted to ground while the regulator is enabled."+ },+ {+ "number": "5",+ "name": "ON/OFF",+ "type": "input",+ "description": "Enable input where high enables the regulator and low (below about 1.4 V typical) puts it in shutdown; the absolute maximum rating is -0.1 V to 6 V."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground connected to system ground, which also serves as the ground return for CIN and COUT and should be kept close to CIN."+ },+ {+ "number": "7",+ "name": "VIN",+ "type": "power_in",+ "description": "Supply input connected to the high-side FET collector that must stay within 6.5 V to 40 V (absolute maximum 45 V) and be bypassed by CIN placed close to the pin and GND."+ },+ {+ "number": "8",+ "name": "VSW",+ "type": "output",+ "description": "Internal high-side FET source and switch node that connects to the inductor and the external diode cathode; the absolute maximum switch-to-ground voltage is -1 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Conflicting CB capacitor value: Table 4-1 (page 4) specifies a 470nF capacitor between CB and VSW, w; Datasheet pin table lists VIN as type 'I' (input); it is typed power_in here because it is the main ; Two NC pins share the same name; each is listed separately by its printed number, as the datasheet l"+ ],+ "pages_sent": 29,+ "cost_usd": 0.1243,+ "at": "2026-10-08T14:33:31"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lm2675",+ "pages": 42,+ "sha256": "8986b0b605946f45",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lm2675n-12.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm2675n-12-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "ce117cbb22edff7826db27d3ea1d7fe1456883ff3ba6a5c6a5d44631b90c19ec",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}