main
Ray
Publish 0.3.0
6bb3a58
LM2596SX-ADJ
3D generated from the datasheet; KiCad's model does not fit this maker's body.
Texas Instruments · DC-DC Converters · TO-263-5
LM2596SX-ADJ from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated DC input supply, 4.5 V to 40 V (45 V absolute max). Bypass with a low-ESR bulk capacitor (e.g. 680 µF) close to the pin to handle the switching current. |
| 2 | Output | power_out | Switching output from the internal power switch. Connects to the catch diode cathode and the input side of the output inductor. Drives up to 3 A at the switching frequency of 150 kHz. |
| 3 | Ground | power_in | Ground |
| 4 | Feedback | input | Feedback sense input for the internal error amplifier. Regulates the pin to VFB = 1.230 V (typ) via an external resistor divider from VOUT that sets the output voltage from 1.2 V to 37 V. Absolute range −0.3 V to +25 V; input bias current ~10 nA (50 nA max). |
| 5 | ON/OFF | input | Active-low TTL shutdown input. Pull LOW (<0.6 V) to enable regulation; drive HIGH (>2.0 V, up to 25 V) to place the device in standby (~80 µA typ, 250 µA max). Tie directly to GND if the shutdown function is unused. |
| 6 | GND | power_in | Package tab (pad 6). printed: Metal Tab GND (Figure 6-2). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-5 |
| Category | PMIC |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback voltage (VOUT programmed for 3 V), TJ = 25°C | VFB | 1.193 | 1.23 | 1.267 | V | 4.5 V ≤ VIN ≤ 40 V, 0.2 A ≤ ILOAD ≤ 3 A, VOUT programmed for 3 V; TJ = 25°C | 6 |
| Feedback voltage (VOUT programmed for 3 V), -40°C to 125°C | VFB | 1.18 | 1.28 | V | 4.5 V ≤ VIN ≤ 40 V, 0.2 A ≤ ILOAD ≤ 3 A, VOUT programmed for 3 V; -40°C ≤ TJ ≤ 125°C | 6 | |
| Feedback bias current, TJ = 25°C | Ib | 10 | 50 | nA | Adjustable version only, VFB = 1.3 V; TJ = 25°C | 7 | |
| Feedback bias current, -40°C to 125°C | Ib | 100 | nA | Adjustable version only, VFB = 1.3 V; -40°C ≤ TJ ≤ 125°C | 7 | ||
| Oscillator frequency, TJ = 25°C | fO | 127 | 150 | 173 | kHz | TJ = 25°C | 7 |
| Oscillator frequency, -40°C to 125°C | fO | 110 | 173 | kHz | -40°C ≤ TJ ≤ 125°C | 7 | |
| Saturation voltage, TJ = 25°C | VSAT | 1.16 | 1.4 | V | IOUT = 3 A; TJ = 25°C | 7 | |
| Saturation voltage, -40°C to 125°C | VSAT | 1.5 | V | IOUT = 3 A; -40°C ≤ TJ ≤ 125°C | 7 | ||
| Max duty cycle (ON) | DC | 100 | % | See note (5) | 7 | ||
| Min duty cycle (OFF) | DC | 0 | % | See note (6) | 7 | ||
| Current limit (peak current), TJ = 25°C | ICL | 3.6 | 4.5 | 6.9 | A | Peak current; TJ = 25°C; see notes (4)(5) | 7 |
| Current limit (peak current), -40°C to 125°C | ICL | 3.4 | 7.5 | A | Peak current; -40°C ≤ TJ ≤ 125°C; see notes (4)(5) | 7 | |
| Output leakage current | IL | 50 | μA | Output = 0 V, VIN = 40 V | 7 | ||
| Output leakage current | IL | 2 | 30 | mA | Output = -1 V | 7 | |
| Operating quiescent current | IQ | 5 | 10 | mA | See note (6) | 7 | |
| Standby quiescent current, TJ = 25°C | ISTBY | 80 | 200 | μA | ON/OFF pin = 5 V (OFF); TJ = 25°C | 7 | |
| Standby quiescent current, -40°C to 125°C | ISTBY | 250 | μA | ON/OFF pin = 5 V (OFF); -40°C ≤ TJ ≤ 125°C | 7 | ||
| ON/OFF pin logic input threshold, Low (regulator ON), -40°C to 125°C | VIH | 0.6 | V | Low (regulator ON); -40°C ≤ TJ ≤ 125°C | 7 | ||
| ON/OFF pin logic input threshold, High (regulator OFF), -40°C to 125°C | VIL | 2 | V | High (regulator OFF); -40°C ≤ TJ ≤ 125°C | 7 | ||
| ON/OFF pin input current, regulator OFF | IH | 5 | 15 | μA | VLOGIC = 2.5 V (regulator OFF) | 7 | |
| ON/OFF pin input current, regulator ON | IL | 0.02 | 5 | μA | VLOGIC = 0.5 V (regulator ON) | 7 | |
| Supply voltage | VIN | 4.5 | 40 | V | 5 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | 5 | ||
| Maximum supply voltage | VIN | 45 | V | 5 | |||
| SD/SS pin input voltage | 6 | V | Voltage internally clamped; if clamp voltage is exceeded, limit current to 1 mA max | 5 | |||
| Delay pin voltage | 1.5 | V | Voltage internally clamped; if clamp voltage is exceeded, limit current to 1 mA max | 5 | |||
| Flag pin voltage | -0.3 | 45 | V | 5 | |||
| Feedback pin voltage | -0.3 | 25 | V | 5 | |||
| Output voltage to ground, steady-state | -1 | V | Steady-state | 5 | |||
| Lead temperature, vapor phase (60 s), KTW package | 215 | °C | KTW package, vapor phase (60 s) | 5 | |||
| Lead temperature, infrared (10 s), KTW package | 245 | °C | KTW package, infrared (10 s) | 5 | |||
| Maximum junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Junction-to-ambient thermal resistance, TO-263 tab on single-sided PCB, 0.5 in² 1-oz copper | RθJA | 50 | °C/W | KTW (TO-263); note (5) | 5 | ||
| Junction-to-ambient thermal resistance, TO-263 tab on single-sided PCB, 2.5 in² 1-oz copper | RθJA | 30 | °C/W | KTW (TO-263); note (6) | 6 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 2 | °C/W | KTW (TO-263) | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | circuitry, the PCB copper area connected to this pin must be kept to a minimum. | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM2596SX-ADJ - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5, generated on the KiCad land (body 8.64 x 10.16 mm, terminals on the pads, 4.57 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm2596sx-adj-etched.step/lm2596sx-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2596sx-adj.step/lm2596sx-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
2eec90879908cf71, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# LM2596SX-ADJ
> 3D generated from the datasheet; KiCad's model does not fit this maker's body.
**Texas Instruments** · DC-DC Converters · TO-263-5
LM2596SX-ADJ from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated DC input supply, 4.5 V to 40 V (45 V absolute max). Bypass with a low-ESR bulk capacitor (e.g. 680 µF) close to the pin to handle the switching current. |
| 2 | Output | power_out | Switching output from the internal power switch. Connects to the catch diode cathode and the input side of the output inductor. Drives up to 3 A at the switching frequency of 150 kHz. |
| 3 | Ground | power_in | Ground |
| 4 | Feedback | input | Feedback sense input for the internal error amplifier. Regulates the pin to VFB = 1.230 V (typ) via an external resistor divider from VOUT that sets the output voltage from 1.2 V to 37 V. Absolute range −0.3 V to +25 V; input bias current ~10 nA (50 nA max). |
| 5 | ON/OFF | input | Active-low TTL shutdown input. Pull LOW (<0.6 V) to enable regulation; drive HIGH (>2.0 V, up to 25 V) to place the device in standby (~80 µA typ, 250 µA max). Tie directly to GND if the shutdown function is unused. |
| 6 | GND | power_in | Package tab (pad 6). printed: Metal Tab GND (Figure 6-2). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-5 |
| Category | PMIC |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback voltage (VOUT programmed for 3 V), TJ = 25°C | VFB | 1.193 | 1.23 | 1.267 | V | 4.5 V ≤ VIN ≤ 40 V, 0.2 A ≤ ILOAD ≤ 3 A, VOUT programmed for 3 V; TJ = 25°C | 6 |
| Feedback voltage (VOUT programmed for 3 V), -40°C to 125°C | VFB | 1.18 | | 1.28 | V | 4.5 V ≤ VIN ≤ 40 V, 0.2 A ≤ ILOAD ≤ 3 A, VOUT programmed for 3 V; -40°C ≤ TJ ≤ 125°C | 6 |
| Feedback bias current, TJ = 25°C | Ib | | 10 | 50 | nA | Adjustable version only, VFB = 1.3 V; TJ = 25°C | 7 |
| Feedback bias current, -40°C to 125°C | Ib | | | 100 | nA | Adjustable version only, VFB = 1.3 V; -40°C ≤ TJ ≤ 125°C | 7 |
| Oscillator frequency, TJ = 25°C | fO | 127 | 150 | 173 | kHz | TJ = 25°C | 7 |
| Oscillator frequency, -40°C to 125°C | fO | 110 | | 173 | kHz | -40°C ≤ TJ ≤ 125°C | 7 |
| Saturation voltage, TJ = 25°C | VSAT | | 1.16 | 1.4 | V | IOUT = 3 A; TJ = 25°C | 7 |
| Saturation voltage, -40°C to 125°C | VSAT | | | 1.5 | V | IOUT = 3 A; -40°C ≤ TJ ≤ 125°C | 7 |
| Max duty cycle (ON) | DC | | | 100 | % | See note (5) | 7 |
| Min duty cycle (OFF) | DC | 0 | | | % | See note (6) | 7 |
| Current limit (peak current), TJ = 25°C | ICL | 3.6 | 4.5 | 6.9 | A | Peak current; TJ = 25°C; see notes (4)(5) | 7 |
| Current limit (peak current), -40°C to 125°C | ICL | 3.4 | | 7.5 | A | Peak current; -40°C ≤ TJ ≤ 125°C; see notes (4)(5) | 7 |
| Output leakage current | IL | | | 50 | μA | Output = 0 V, VIN = 40 V | 7 |
| Output leakage current | IL | | 2 | 30 | mA | Output = -1 V | 7 |
| Operating quiescent current | IQ | | 5 | 10 | mA | See note (6) | 7 |
| Standby quiescent current, TJ = 25°C | ISTBY | | 80 | 200 | μA | ON/OFF pin = 5 V (OFF); TJ = 25°C | 7 |
| Standby quiescent current, -40°C to 125°C | ISTBY | | | 250 | μA | ON/OFF pin = 5 V (OFF); -40°C ≤ TJ ≤ 125°C | 7 |
| ON/OFF pin logic input threshold, Low (regulator ON), -40°C to 125°C | VIH | 0.6 | | | V | Low (regulator ON); -40°C ≤ TJ ≤ 125°C | 7 |
| ON/OFF pin logic input threshold, High (regulator OFF), -40°C to 125°C | VIL | | | 2 | V | High (regulator OFF); -40°C ≤ TJ ≤ 125°C | 7 |
| ON/OFF pin input current, regulator OFF | IH | | 5 | 15 | μA | VLOGIC = 2.5 V (regulator OFF) | 7 |
| ON/OFF pin input current, regulator ON | IL | | 0.02 | 5 | μA | VLOGIC = 0.5 V (regulator ON) | 7 |
| Supply voltage | VIN | 4.5 | | 40 | V | | 5 |
| Operating free-air temperature | TA | -40 | | 125 | °C | | 5 |
| Maximum supply voltage | VIN | | | 45 | V | | 5 |
| SD/SS pin input voltage | | | | 6 | V | Voltage internally clamped; if clamp voltage is exceeded, limit current to 1 mA max | 5 |
| Delay pin voltage | | | | 1.5 | V | Voltage internally clamped; if clamp voltage is exceeded, limit current to 1 mA max | 5 |
| Flag pin voltage | | -0.3 | | 45 | V | | 5 |
| Feedback pin voltage | | -0.3 | | 25 | V | | 5 |
| Output voltage to ground, steady-state | | -1 | | | V | Steady-state | 5 |
| Lead temperature, vapor phase (60 s), KTW package | | | | 215 | °C | KTW package, vapor phase (60 s) | 5 |
| Lead temperature, infrared (10 s), KTW package | | | | 245 | °C | KTW package, infrared (10 s) | 5 |
| Maximum junction temperature | TJ | | | 150 | °C | | 5 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 5 |
| Junction-to-ambient thermal resistance, TO-263 tab on single-sided PCB, 0.5 in² 1-oz copper | RθJA | | 50 | | °C/W | KTW (TO-263); note (5) | 5 |
| Junction-to-ambient thermal resistance, TO-263 tab on single-sided PCB, 2.5 in² 1-oz copper | RθJA | | 30 | | °C/W | KTW (TO-263); note (6) | 6 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 2 | | °C/W | KTW (TO-263) | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | circuitry, the PCB copper area connected to this pin must be kept to a minimum. | 4 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `LM2596SX-ADJ`
- Footprint: `Package_TO_SOT_SMD:TO-263-5_TabPin6`
- 3D model: TO-263-5, generated on the KiCad land (body 8.64 x 10.16 mm, terminals on the pads, 4.57 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lm2596sx-adj-etched.step` / `lm2596sx-adj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2596sx-adj.step` / `lm2596sx-adj.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm2596.pdf) (47 pp, sha256 `2eec90879908cf71`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/lm2596sx-adj-datasheet.pdf)